Products
-
Anderson Power Products Kit with 4 auxiliary contacts AWG20-16 for SBE 80/SBE 160/SBX 175 [MPN: 441G2]
€25,00
-
Milwaukee Laser Distance Meter | Milwaukee LDM 30
Features: • User-friendly one-person point-and-shoot system • IP54 rated for water and dust protection • Automatic shut-off and low power indicator • Supports both metric and imperial units of measurement • Sleek housing design with a belt clip for easy transport • Two easily accessible measure buttons located on the front and side of the housing • Allows for single measurements as well as continuous tracking • Large 3-line LCD graphical display with automatic white backlight • Display retains the last three measurements for reference Technical information: • Maximum Measurement Range: 30 m • Accuracy: ± 2 mm • Laser Classification: Class 2 • Measurement Range: 0.15 - 30 m • Display Size: 25 x 25 mm • Dimensions: 101 x 38 x 28 mm • Battery Type: 2 x AAA • Weight (with Battery Pack): 0.1 kg
€110,00
-
Briechle Elektronik Led Adapter 130-LA 12-5B13
12 Volt resistor replacement load for the adaptation of light-emitting diode (LED) trailer lamps at vehicles with incandescent lamp monitoring. The direction indicator lamps and the contacts 9 to 13 are looped. LED-ADAPT must be mounted on a metal surface. Important: The direction indicators must be incandescent lamps or LEDs with their own monitoring. Other lines may have additional load of 10W maximum, in this case monitoring is disabled.▪ Operating voltage: 12V▪ Input: 12V 13-pol plug▪ Output: 12V 13-pol socket Weight: 2.85 kg Ready for use solution with 13 pin standard connectors Configuration: "2 incandescent lamps + 5 LED + contacts 9 to 13" No cabling work needed The additional pins 9 to 13 are looped Retrofitting for a factory finished trailer in case of incompatibility with a new vehicle Failure of an LED is detected (if no incandescent lamp is connected in parallel) Operation voltage: 12V nominal Output current: 0.8A (Over current protection time delay 1...2000s !) Connection input: Male connector 13-pin 12V ISO'11446 Connection output: Female socket with flap cover 13 pin 12V ISO'11446 Load imitation: 2x4W (rear lamps), 1x34W (stoplight) 1x17W (fog lamp), 1x17W (reversing lamp) Cable length input: app. 3300mm Cable length output: app. 600mm Temperature range: -40...+75°C Electrical protection: Overcurrent, overtemperature, reverse polarity Mechanical protection: entirely sealed Dimensions: 280 x 70 x 25mm without cable outlet Mass: app. 2850g Failure monitor LEDs: 3mA (rear lamp) 8mA (stoplight) 8mA (fog lamp) 20mA (reversing lamp) Mounting rule: cooling plate 8dm² (aluminum sheet 1.5mm thickness) or on chassis frame, lamp configuration only 2 x incandescent lamps + 5xLED(+0...10W)
€297,00
-
Briechle Elektronik Led Adapter LA 12-2EK
12 Volt resistor replacement load for the adaptation of light-emitting diode (LED) trailer lamps at vehicles with incandescent lamp monitoring. The failure of direction indicators is indicated.***CAUTION*** LED-ADAPT must be mounted on a metal surface. The connection of any bulb on the direction indicator output is prohibited. The overcurrent protection may cut off not until after several minutes! ▪ Operating voltage: 12V nominal▪ as ballast for LED direction indicators▪ operates right and left turn signals Weight: 0.35 kg Single cable version LED direction indicator monitoring Serves the direction indicators with replacement resistors Conditionally short circuit proof (about 100 cycles) Operation voltage: 12V nominal Output current: max. 0.4A (direction) (Over current protection time delay 1...2000s!) Connection: Hose line 5x1mm², ins. 6.3mm blade receptacle Load imitation: 2x17W (direction) Cable length: 0.25 m Temperature range: -40...+75°C Electrical protection: Overcurrent, overtemperature, reverse polarity Mechanical protection: Entirely sealed (IP69K) Dimensions: 120 x 70 x 25mm Mass: app. 350g Failure monitor LEDs: 20mA (direction) Mounting rule: Cooling plate 8dm² (aluminum sheet 1.5mm thickness) or on chassis frame
€119,00 €94,00
-
Briechle Elektronik Led Adapter LA 12-7
12 Volt resistor replacement load for the adaptation of light-emitting diode (LED) trailer lamps at vehicles with incandescent lamp monitoring. The failure of a LED unit is indicated and the replacement load is turned off. LED-ADAPT must be mounted on a metal surface. ***CAUTION*** The connection of any bulb on the output is prohibited. The overcurrent protection may cut off not until after several minutes! ▪ Operating voltage: 12V nominal▪ Input: open cable end▪ Output: open cable endWeight: 1.68 kg Simply connect ahead of LED lamps LED failure is indicated The short circuit is indicated Serves all lines with replacement resistors Input cable 3,5m can be connected directly to the plug Operation voltage: 12V nominal Output current: 0.8A (Over current protection time delay 1...2000s !) Connection input: Sheathed cable 8x1mm², bare endings Connection output: Sheathed cable 8x1mm², bare endings Load imitation: 2x17 W (direction), 2x4W (rear lamp), 1x34W (stoplight) 1x17W (fog lamp), 1x17W (reversing lamp) Cable length input: app. 3,5m Cable length output: app. 1,2m Temperature range: -40...+75°C Electrical protection: Overcurrent, overtemperature, reverse polarity Mechanical protection: entirely sealed Dimensions: 280 x 70 x 25mm without cable outlet Mass: app. 1680g Failure monitor LEDs: 20mA (direction) 3mA (rear lamp) 8mA (stoplight) 8mA (fog lamp) 20mA (reversing lamp) Mounting rule: cooling plate 8dm² (aluminum sheet 1.5mm thickness) or on chassis frame
€225,00
-
€65,00
-
€29,50 €15,90
-
Albright Lewmar 12V Contactor for BowThrusters 4kW and 5kW
Replacement Contactor, 12 Volt DC (4/5kW): Lewmar B11128 Fits 12V Lewmar Bowthrusters 4kW and 5 kW Superior High Quality Made by Albright, Type DC182-602L
€465,00 €385,00
-
Albright Lewmar 24V Contactor for BowThrusters 4kW, 5kW, 6kW and 8kW
Super Duty & Super Quality Replacement Contactor 24 Volt DC (4/5/6kW): Lewmar B11129 Fits 24V Lewmar Bowthrusters 4, 5, 6 & 8kW for example Superior High Quality: Made by Albright, this DC182-781L is 100% identical of original manufacturer Type DC182-685L
€685,00 €599,00
-
OEM NORDIC - Quality Parts Distribution Lewmar Solenoid 24V - B11129 replacement
This contactor is same spec, form, function and power handling as Lewmar B11129 for also known as DC182-685L 24Volt (4/5/6/8kW bow-thrusters)
€685,00 €499,00
-
Milwaukee M12 FUEL™ powerpack | Milwaukee M12 FPP2E2-402X
Battery Tool Set Milwaukee M12 FPP2E2-402X PowerPack M12 FPP2E2-402X: M12 FPD2 – Compact FUEL Hammer Drill, M12 FQID – Compact FUEL Impact Driver, C12 C – Charger. Includes 2 x 4.0 Ah REDLITHIUM batteries, 80 min charger, and HD Box case. Product Information Technical SpecificationsNumber of Drills: 1Number of Saws: 0Number of Grinders: 0Total Number of Machines: 2Power Source: Battery Product CodesLVI: CWG021PLC: CWG021EAN/GTIN: 4058546408794Manufacturer's Product Code: 4933480594 Basic InformationPackage Dimensions (L x W x H): 475 x 138 x 370 mmPackage Volume: 24.254 lPackage Weight: 5.35 kgUnit: piecePackage Sizes: 1 / 26Sales Package Contents: –UNSPSC: 27112703Brand: MILWAUKEE
€599,00 €569,00
-
Anderson Power Products Main contact PP15/45 - AWG12-16 (3.3 - 1.31 mm²) [MPN: 1331-BK]
€1,00
-
![Main contact PP180 / SB 175 - AWG1/0 (53.5 mm²) [MPN: 1382-BK] - OEM NORDIC - Quality Parts Distribution](//mkcontrols.eu/cdn/shop/files/anderson-power-products-sb-175-series-contact-loose-piece-180-a-silver-oem-nordic-stone-carving-vase_167_5fe4b9ca-8b90-40ea-9c36-8d280e936d77.jpg?v=1773426708&width=645)
Anderson Power Products Main contact PP180 / SB 175 - AWG1/0 (53.5 mm²) [MPN: 1382-BK]
€7,80 €3,99
-
![Main contact PP180 / SB 175 - AWG2 (33.6 mm²) [MPN: 1383-BK] - OEM NORDIC - Quality Parts Distribution](//mkcontrols.eu/cdn/shop/files/anderson-power-products-sb-175-series-contact-loose-piece-180-a-silver-oem-nordic-stone-carving-vase_167_89921a31-ad73-440d-9963-9729e4b6d503.jpg?v=1773426708&width=645)
Anderson Power Products Main contact PP180 / SB 175 - AWG2 (33.6 mm²) [MPN: 1383-BK]
€7,80 €3,99
-
Anderson Power Products Main contact PP180 / SB 175 - AWG4 (21.2 mm²) [MPN: 1384-BK]
€7,80 €3,99
-
Anderson Power Products Main contact SB 120 / PP120 - AWG2 (33.6 mm²) [MPN: 1319-BK]
€3,00
-
Anderson Power Products Main contact SB 120 / PP120 - AWG4 (21.2 mm²) [MPN: 1319G4-BK]
€3,00
-
Anderson Power Products Main contact SB 120 / PP120 - AWG6 (13.3 mm²) [MPN: 1319G6-BK]
€3,00
-
Anderson Power Products Main contact SB 350 - 300 MCM (152 mm²) [MPN: 910-BK]
You can find bulk packed Anderson SB 350 contacts here.
€46,00
-
Anderson Power Products Main contact SB 350 - AWG1/0 (53.5 mm²) [MPN: 917]
You can find bulk-packed Anderson SB 350 contacts here.
€9,00
-
Anderson Power Products Main contact SB 350 - AWG2/0 (67,4 mm²) [MPN: 907]
You can find bulk packed Anderson SB 350 contacts here.
€14,00 €9,80
-
Anderson Power Products Main contact SB 350 - AWG3/0 (85,0 mm²) [MPN: 916]
€9,00
-
Anderson Power Products Main contact SB 350 - AWG4/0 (107,2 mm²) [MPN: 908]
You can find bulk-packed Anderson SB 350 contacts here.
€9,00
-
Anderson Power Products Main contact SB 50/PP75 - AWG6 (13.3 mm²) [MPN: 5900-BK]
€1,00
![Main contact PP180 / SB 175 - AWG1/0 (53.5 mm²) [MPN: 1382-BK] - OEM NORDIC - Quality Parts Distribution](http://mkcontrols.eu/cdn/shop/files/anderson-power-products-sb-175-series-contact-loose-piece-180-a-silver-oem-nordic-stone-carving-vase_167_5fe4b9ca-8b90-40ea-9c36-8d280e936d77.jpg?v=1773426708&width=645)
![Main contact PP180 / SB 175 - AWG2 (33.6 mm²) [MPN: 1383-BK] - OEM NORDIC - Quality Parts Distribution](http://mkcontrols.eu/cdn/shop/files/anderson-power-products-sb-175-series-contact-loose-piece-180-a-silver-oem-nordic-stone-carving-vase_167_89921a31-ad73-440d-9963-9729e4b6d503.jpg?v=1773426708&width=645)
You have seen 768 out of 7044 products