Replacement coil 2155-53GE for SW200 · SW202 for a 36 V DC supply. Rated for intermittent duty (the coil is energised for short periods only).
Match both the voltage and the duty rating of the coil you replace
A new coil restores pull-in force when the old one is open-circuit, overheated or weak
Check the coil data on the old part or on the contactor label before ordering
Albright part number: 2155-53GESupplied to order, typically 4–7 weeks. The price is indicative, per one unit (1 pc), and confirmed in our quote. Not sure which part your contactor needs? Send us its full Albright part number and we will check the fit before you order.Genuine Albright part. Albright is a trademark of Albright International Ltd.
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.The SW200 has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks. Developed for both interrupted and uninterrupted loads, the SW200 is suitable for switching Resistive, Capacitive, and Inductive loads. The SW200 features single pole single throw, double-breaking main contacts with silver alloy tips, which are weld resistant, hardwearing, and have excellent conductivity. The SW200 has M10 stud main terminals and 6.3mm spade coil connections. It can be mounted via M5 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be horizontal or vertical, when vertical the M10 contact studs should point upwards.
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.
The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via the integral bracket formed into the coil housing case. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
PWM coil economiser module CC74L-36 for 36 V systems. It applies full voltage to pull the contactor in, then cuts the coil current to a lower holding level.
Less coil heating and lower holding power on continuously energised contactors
Pick the module that matches the battery voltage of the system
Albright part number: CC74L-36Supplied to order, typically 4–7 weeks. The price is indicative, per one unit (1 pc), and confirmed in our quote. Not sure which part your contactor needs? Send us its full Albright part number and we will check the fit before you order.Genuine Albright part. Albright is a trademark of Albright International Ltd.
About Intermittent - Int SU80-52117P
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.
The SU80P is an up-rated version of the SW80P designed for Interrupted and Uninterrupted applications. It is sealed to IP66 and has been designed for direct current loads in more arduous environments. It is suitable for switching Resistive, Capacitive and Inductive loads. Typical applications include, but are not limited to, electric motors, hydraulic power packs, winches and speed controllers.
The SU80P features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SU80P features an enclosed top cover and offers environmental protection to IP66. It has M8 stud main terminals and 6.3mm spade coil connections. Mounting can be vertical or horizontal, when vertical the M8 contact studs should point upwards.
