JAQUET 830A-36889 PC-T400
Original Jaquet cable is obsolete/discontinued due to Jaquet has stopped manufacturing the T4xx, T5xx and T6xx units these cables are used to. Functional replacement here.Also please check replacement units for the obsolete units:Replacement of Jaquet T401.00Replacement of Jaquet T501.00Replacement of Jaquet T601.00
Reliable Hall-Effect Speed Sensor for Hazardous Environments
The Jaquet FTG 1088.00 Ex (MPN: 343Z-03772) is a rugged, ATEX-approved Hall-effect speed sensor designed for non-contact rotary speed detection in explosive environments. With a wide frequency range and robust mechanical design, it is ideal for industrial applications such as power generation, oil & gas, and process automation.
Key Features:
Certified for Hazardous Zones: ATEX-certified (II 1G / II 1D) for use in gas and dust explosion-risk environments
Output Signal: Square wave signal, proportional to rotational speed (5 Hz to 20 kHz)
Electrical Specs: 5V ±10% power supply (max. 12V), 25 mA sink current, reverse polarity protected
Connection: 400 mm twisted Teflon-insulated open wire
Housing: Argentan (CuNi10Zn42Pb), hermetically sealed, potted electronics for long-term stability
Environmental Resistance: IP68 sensor head, IP67 cable exit, shock resistance 20 g, vibration 3 g
Operating Temp: -40°C to +125°C
Jaquet FTG 1088.00 Ex Speed Sensor (343Z-03772) – ATEX Certified, 400 mm Open Wire
This sensor works with a ferromagnetic pole wheel (module ≥0.5) and supports air gaps up to 1.3 mm depending on wheel geometry. Its differential Hall sensor design ensures high immunity to electromagnetic interference, delivering clean and reliable pulse output even in harsh conditions.
Jaquet DSD 1205.21 ATV (378Z-04760) Ferrostat Speed Sensor
The Jaquet Speed Sensor DSD 1205.21 ATV, with the model number 378Z-04760, is available for purchase. This sensor is a part of Jaquet's product line, known for its precision and quality in measuring speeds. The item is available for international shipping, typically within 1-3 business days for stock items. For more detailed information, including pricing and specific features of this sensor, please ask us for the latest datasheet & drawing of this sensor.
Key Features of DSD 1205.21 ATV (378Z-04760) :
High Performance: Engineered to deliver exceptional results.
Durable Construction: Built with high-quality materials for long-lasting use.
Innovative Design: Incorporates the latest technology for enhanced efficiency.
Cost-Effective: Offers great value for money with competitive pricing.
JAQUET 304Z-03029 FTG 1052 SM
Jaquet Speed Sensor DSE 2220 MTZ (5m) (MPN: 304Z-03029) (old type was FTG 1052 SM)
Are you working with low signal levels but do not need a protective hose?
In case, please see also an alternative DSE 2210 SHV – 304Z-03026, which is quite similar as 304Z-03029 as both has a low signal levels. The main difference is the magnet fitted inside the sensor and the type of cable.
However, depending on the application, this may be not relevant.
Jaquet Speed Sensor DSF 1210.00 SHV (5m)
The Jaquet DSF 1210.00 SHV (5m) is a high-quality, dynamic Hall-effect speed sensor designed for industrial use. This sensor version cable is capable to mounted to High Ambient Temperature locations.
Key Features:
• Housing: M12x1• Detection Capability: Module 1.0 minimum• Cable: 5m Teflon, open wire ends• Temperature Range: -40°C to +125°C• Output: Built-in line amplifier, typically Push-Pull
The Jaquet DSF 1210.00 SHV (5m) is a premium dynamic Hall-effect speed sensor, crafted for demanding industrial applications. Its robust design and precise detection capabilities make it ideal for environments requiring reliable performance in extreme conditions.
Key Features
Housing: Compact M12x1 design for easy installation and compatibility.
Detection Capability: Optimized for Module 1.0 or greater, ensuring precise speed detection.
Cable Length: 5 meters of durable Teflon cable with open wire ends for flexible and secure connections.
Wide Temperature Range: Operates efficiently from -40°C to +125°C, making it suitable for extreme environments.
Output: Equipped with a built-in line amplifier, providing a Push-Pull signal for robust and interference-free output.
This sensor combines durability and precision, making it a dependable choice for various industrial applications such as machinery monitoring, automotive testing, and industrial automation.
Applications
Industrial machinery speed monitoring
Rotational measurement in challenging environments
Automotive testing setups
Why Choose Jaquet DSF 1210.00 SHV?The Jaquet DSF 1210.00 SHV is engineered for accuracy and durability, ensuring reliable performance in high-demand scenarios. Its dynamic detection capability and built-in amplifier ensure superior functionality, even in harsh operating conditions.
For further details or inquiries, please contact us or download the latest full technical datasheet.
Product Overview: Jaquet DSF 1210.00 SHV Ex ATEX
Premium Industrial Hall Effect Speed Sensor
Model Number: 374Z-05176
Specifications: Features an M12x1 housing and is equipped with a 10-meter Teflon cable for superior durability and performance. It also boasts Ex certifications, ensuring its suitability for environments with explosive atmospheres.
Functional Capabilities:
The Jaquet DSF 1210.00 SHV Ex ATEX speed sensor is designed for precision speed measurement applications. It is optimally used alongside a pole wheel to accurately produce speed-proportional frequency signals. This sensor is characterized by its dynamic performance, capable of generating pulses at frequencies as low as 0.05 Hz. At its core is a magnetically biased Hall effect sensor, complemented by an amplifier with a trigger characteristic. The output stage is robust, ensuring short-circuit protection.
ATEX Certification:
This sensor is ATEX-certified, making it a safe choice for use in environments where explosive gases or dust may be present. To maintain its certification, the sensor must be used in a clean, undamaged condition. Any modifications to the sensor, unless explicitly permitted in the operating instructions, are strictly prohibited, ensuring the safety and integrity of its operation in hazardous areas.
Signal Output Characteristics:
Type: Generates a square wave signal through a push-pull output stage, directly coupled to the power supply, with 0V serving as the reference voltage.
Load Current: Maximum of 25 mA.
Output Voltage:
High level (UHi) is greater than the supply voltage minus 4V, at a source current of 25 mA.
Low level (ULo) is less than 2V, at a sink current of 25 mA.
It is important to consider the voltage drop caused by the cable's impedance and the resistance of any safety barriers connected to the circuit. Additionally, the sensor's design ensures protection against short circuits and reverse polarity, enhancing its reliability and safety in industrial applications.
Signal Output Specifications
• Signal Type: Square wave from push-pull output stage
• DC Coupling: Coupled to supply (0V as reference voltage)
• Max Load Current: 25 mA
• Output Voltage Levels:
• High (UHi): Greater than supply voltage minus 4 V (at source current 25 mA)
• Low (ULo): Less than 2 V (at sink current 25 mA)
• Voltage Considerations: Voltage drop due to cable impedance and safety barrier resistance should be accounted for
• Protection: Short-circuit proof and reverse polarity protected
DSF 1210.00 SHV Ex Atex (10m)- Ferrostat sensor with amplifier; 0.05 Hz ... 20 kHz, -40 ... + 125 ° C,- Housing thread M12x1- Connecting cable PTFE 5m, for single-wire safety (Zone 1) Eex ia IIC T6-T1.- Weight: 350 g
Jaquet DSF 1210.00 SHV Ex ATEX - Premium Industrial Hall Effect Speed Sensor
The Jaquet DSF 1210.00 SHV Ex ATEX (374Z-05176) is a premium intrinsically safe Hall-effect speed sensor certified for use in explosive atmospheres. Featuring an M12x1 housing with 5m Teflon cable, this sensor generates speed-proportional frequency signals from 0.05 Hz with dynamic behavior for both static and near-static applications. ATEX certified for flammable gas and dust environments, it combines compact design with robust performance for hazardous area monitoring.
Technical Specifications
Model: DSF 1210.00 SHV Ex ATEX (5m)
Part Number: 374Z-05176
Drawing Number: 110428F1
Housing: M12x1 thread, stainless steel X12CrNiS188 (material 1.4305)
Sensing Technology: Magnetically biased Hall device with trigger amplifier
Supply Voltage: 8-28 VDC (reverse polarity protected, max AC ripple 25 mVpp)
Current Consumption: Max 15 mA (without load)
Frequency Range: 0.05 Hz to 20 kHz (dynamic behavior with guaranteed pulse generation down to 0.05 Hz)
Maximum Tightening Torque: 12 Nm for M12x1
ATEX Certifications
Gas Atmospheres: II 2 G Ex ia IIC T6 Gb (Zone 1)
Dust Atmospheres: II 2 D Ex ia IIIC T155°C Db (Zone 21)
Standards Compliance: EN 60079-0:2012+A11:2013 and EN 60079-11:2012
Certificate: ZELM 03 ATEX 0124X (with supplements 1-4)
EMC Compliance: 2014/30/EU, IEC 61000-6-2
Notified Body: PRIMARA (ID 2572)
Operating Temperature
Gas Environments: -20°C to variable maximum (dependent on electrical power and temperature class - see datasheet TABLE 1)
Dust Environments: -20°C to +100°C
Temperature Class: T1 through T6 supported (varies with available electrical power)
Note: Maximum operating temperature depends on sensor housing size, available electrical power from intrinsically safe supply, and Ex temperature class requirements
Signal Output
Signal Type: Square wave from push-pull output stage
Signal Coupling: DC-coupled to supply (0V = reference voltage)
Maximum Load Current: 25 mA
Output Voltage HIGH: UHi > USupply - 4V (at Isource = 25 mA)
Output Voltage LOW: ULo < 2V (at Isink = 25 mA)
Protection: Short-circuit proof and reverse polarity protected
Note: Voltage drop from cable impedance and safety barrier resistance must be considered
Cable Specifications
Cable Type: Teflon cable (Art. No. 824L-35053)
Cable Length: 5 meters
Conductors: 4-pole, 4 x 0.24 mm² (AWG 24)
Shielding: Mesh screen, isolated from housing
Outer Diameter: Max 4.0 mm
Outer Jacket: White
Minimum Bend Radius: 60 mm
Weight: 32 g/m
Note: Brown wire is not used
Target Wheel Requirements
Material: Magnetically permeable material (e.g., Steel 1.0036)
Preferred Type: Involute gear wheel (module 0.5 minimum)
Minimum Tooth Width: 10 mm
Side Offset: < 0.2 mm
Eccentricity: < 0.2 mm
Air Gap Specifications
Module 1: 0.2 to 1.0 mm
Module 2: 0.2 to 2.5 mm
Module 3: 0.2 to 3.5 mm
Module 4 and larger: 0.2 to 4.5 mm
Note: Within specified air gap, output signal amplitude is not influenced by gap distance
Environmental Protection
Protection Class: IP68 (sensor head), IP67 (cable connection)
Housing Seal: Front side hermetically sealed
Potting: Electronic components fully potted in chemical and age-resistant ceramic compound
Chemical Resistance: Resistant to oil, grease, and harsh industrial conditions
Vibration Immunity: 5 gn in the range 5-2000 Hz
Shock Immunity: 20 g during 20 ms, half-sine wave
Electrical Isolation: Housing, cable screen, and electronics galvanically separated (500V/50Hz/1 min)
Key Features
ATEX Certified: Approved for Zone 1 gas and Zone 21 dust hazardous areas
Near-Zero Speed Detection: Guaranteed pulse generation down to 0.05 Hz for static applications
Dynamic Behavior: Suitable for variable speed applications
Compact M12x1 Design: Space-saving installation in tight locations
High-Quality Cable: Teflon insulation for chemical and temperature resistance
Intrinsically Safe: Type ia certification for maximum safety in explosive atmospheres
No Maintenance Required: Sealed, non-serviceable design for long-term reliability
Applications
Ideal for speed monitoring in explosive atmospheres including:
Oil and gas production and processing facilities
Chemical and petrochemical plants
Paint and solvent production areas
Pharmaceutical manufacturing in classified areas
Grain handling and milling operations
Mining equipment in flammable atmospheres
Turbomachinery in hazardous zones
Any Zone 1 (gas) or Zone 21 (dust) classified location
Installation Requirements
Mounting: Solid and vibration-free mounting essential
Alignment: Sensor must be aligned to pole wheel according to sensor drawing
Positioning: Mount with middle of face over middle of pole wheel; minimum 3mm from wheel edge
Air Gap: Set smallest possible gap without risk of contact during operation
Cable Routing: Keep sensor wires away from large electrical machines; do not run parallel to power cables
Safety Barriers: Must be connected through appropriate Zener barriers for intrinsically safe operation
Shield Connection: Cable shield must be connected to 0V on equipment side
Safety Notice
Usage Condition: Sensor must be used in undamaged and clean condition only
Modifications: Modifications prohibited unless expressly listed in operating instructions
Cable Limitations: Permissible cable length and capacitance/inductance limits per Certificate supplement must be observed
Temperature Monitoring: Surface temperature must not exceed 2/3 of dust/air mixture ignition temperature where dust clouds present
CE Directives: Installation must comply with CE directives for explosive environment apparatus
Important: This sensor is ATEX certified (ZELM 03 ATEX 0124X) for intrinsically safe operation in explosive atmospheres. Must be installed according to sensor drawing and used with appropriate certified safety barriers. The sensor cannot be repaired - replacement only. Available in 2m, 5m, and 10m cable lengths. Sensor is the same, cable can also be cut. Manufactured by TE Connectivity Sensors (Jaquet brand). For complete installation and safety requirements, refer to the full European Certificate of Conformity and supplements.
JAQUET T411 Tachometer, Display; 4..20 mA outputMPN = 383Z-05318Lead time can be 50-70 weeks currently
Item is temporarily not available before Q3/2024
Jaquet T411.00 · 383Z-05318· single-channel speed transmitter with display· 0-35 kHz· speed signal to relay, open collector and analogue output· suitable for active and passive sensors
Jaquet T411 is a Single Channel Tachometer speed switch with a display which converts absolute speed into an analogue signal.
This unit will measure from 0-1 Hz all the way and up to 35 kHz. T411 gives a 4-20 DCmA output, which can be configured with the included Windows software package. Jaquet T411 features a single changeover relay and includes 2 limits (A/B) with programmable hysteresis. The T411's adaptive trigger provides high noise immunity, giving a fast response to over-speed conditions.
Features of T411
T411.00 = Tachometer Only w/4-20 DCmA Output and 1 Relay
Converts absolute speed into an analogue signal
10-30 DCV Power Supply
Includes 2 limits (A/B) with programmable hysteresis
Isolated signal input with automatic trigger level adjustment
Built-in isolated sensor supply with sensor monitoring
Open collector output of sensor frequency
Pluggable terminals
Configuration and status via included Windows software
Accuracy class 0.05% for limits & 0.5% for analog signals
Advantages of T411
Fast response to over-speed conditions
Germanischer Lloyd’s and ABS approval for marine applications
0/4…20 mA or 0/2…10 V analogue output with rising or falling characteristics
Adaptive trigger provides high noise immunity e.g. with electromagnetic sensors
Digital input for direct treatment of frequency signals
2 possible relay configuration sets (e.g. for start-up bridging, controlled via binary inputs)
Pluggable terminals
Integrated 2 or 3 wire sensor monitoring and system watchdog
JAQUET T401.00 under MPN: 383Z-05307 with 4..20mA output
Disontinued and not available from manufacturer anymore, since October 2024
Alternative to T401.00 Jaquet is available:
Replcement can be found here, SpeedSys T10 is an upgraded version and designed to replace T401 which has been made obsolete by Jaquet / TE.**Please note product image is T401 with T411 display, we have this setup also as a replacement on one unit here.
Jaquet Zero Speed DSY 1205.01 AHW 374Z-05124
The DSY 1205.01 AHW [8 .. 32 VDC, PP] Hall sensor is suitable, in conjunction with a pole wheel, for generating square wave signals proportional to rotary speeds. It has a static behavior, so that pulse generation is guaranteed down to a speed corresponding to a frequency of 0Hz. The monitoring element consists of a magnetically biased hall effect semiconductor. Several amplifier variants are offered for covering a wide application range. The internal two-channel structure means that the sensor must be oriented. The sensors have a special orientation sleeve with pin for ease of installation.
Length: 75 mmWeight: 32 grams
The notation "8 .. 32 VDC, PP" indicates the power supply requirements for the device.
"8 .. 32 VDC" suggests that the device operates with a direct current (DC) voltage supply within the range of 8 to 32 volts. This means it can be powered by any DC source within this voltage range.
"PP" stand for "Peak-to-Peak" voltage, indicating the peak-to-peak voltage of the signal the device is capable of handling.
TE / Jaquet Speed Sensor – DSD 1630.73 SHW-F300G
The TE Connectivity / Jaquet DSD 1630.73 SHW-F300G is a high-performance digital speed sensor designed for reliable measurement in demanding industrial environments. Known for its robust construction and long-term accuracy, this sensor is widely used in turbine monitoring, rotating machinery, generator systems, and applications requiring precise speed feedback.
Main Features
High-precision digital speed sensing
Durable housing designed for harsh operating environments
Fast response time with stable output
TE / Jaquet proven reliability for industrial machinery
Suitable for continuous operation and vibration-heavy locations
Technical Specifications
Model
DSD 1630.73 SHW-F300G
Manufacturer
TE Connectivity / Jaquet
MPN
3742615067
Sensor Type
Digital speed sensor
Application Range
Rotating machinery, turbines, generators, industrial automation
Operating Style
High-accuracy, continuous-operation speed measurement
Build
Heavy-duty housing, resistant to vibration and environmental stress
Typical Output
Digital frequency / speed signal (depending on installation)
Applications
Industrial turbine systems
Generator speed monitoring
Pump and compressor systems
Rotating industrial equipment
OEM machine manufacturing
Why Choose This Sensor?
Jaquet sensors are known for precision, durability and decades of field-tested reliability. This model provides fast, stable digital output in environments where accuracy is critical and downtime is costly.
Product data is provided for reference. OEM Nordic supplies genuine TE / Jaquet components or fully compatible alternatives depending on availability. Always verify fit and specification for your application before ordering.
TE / Jaquet Speed Sensor DSE EH10.21 SHZ Ex-ATEX (5m)
Manufacturer Part Number (MPN): 347Z-05096
Cable Length: 5 meters
Certification: Ex-ATEX (Explosion-proof)
Product Overview
The Jaquet DSE EH10.21 SHZ Ex-ATEX is a certified explosion-proof speed sensor engineered for hazardous environments. With a 5-meter integrated cable and robust stainless steel construction, this sensor ensures precise rotational speed measurement in ATEX-rated zones such as oil & gas, mining, or chemical industries.
Key Features
Explosion-proof design (ATEX Certified)
Long 5-meter cable for flexible installation
Durable stainless steel housing
High-reliability speed sensing
Resistant to harsh industrial environments
Applications
Hazardous area speed detection (Zone 1 / Zone 2)
Oil & gas industry monitoring
Mining and underground equipment
Chemical processing systems
Technical Specifications
Brand
TE / Jaquet
Model
DSE EH10.21 SHZ Ex-ATEX
MPN
347Z-05096
Cable Length
5 meters
Explosion Proof
Yes – Ex-ATEX Certified
Application Environment
Hazardous / ATEX Zones
Need Technical Help?
Have questions about ATEX certification or compatibility? Contact our technical support team — we’re here to help.
This sensor is an alternative to an obsolete version DSE EH20.06 S1HZ Ex-Atex for example, but installation must follow the Ex-Atex data in the datasheet for the Atex application.
TE / Jaquet Speed Sensor DSF 2210.00 SHV Ex-ATEX (10m) | MPN: 374Z-05881
Ensure reliable and precise speed monitoring in hazardous environments with the TE / Jaquet DSF 2210.00 SHV Ex-ATEX Speed Sensor. Engineered to meet stringent ATEX standards for explosive atmospheres, this high-performance sensor is ideal for applications in the oil & gas, mining, and industrial sectors.
(If you are looking for DSF 1810.00 SHV Ex-Atex, which is made obsolete/discontinued), DSF 2210.00 SHV Ex-Atex is the same sensor but with a larger sensor head and also the screw. The diameter is 22mm.
Also available in multiple cable lengths:– 2-meter cable– 5-meter cable
Key Features:
Model: DSF 2210.00 SHV Ex-ATEX
Part Number (MPN): 374Z-05881
Cable Length: 10 meters for flexible installation
Explosion Protection: Certified for use in ATEX-rated zones
Reliable Performance: Accurate speed detection under extreme conditions
Durable Construction: Rugged design suitable for harsh environments
Perfect for integration in turbine, engine, or rotating machinery systems where safety and precision are paramount.
Applications:
Industrial automation
Hazardous zone monitoring
Rotational speed sensing
TE / Jaquet Speed Sensor DSF 2210.87 STV (5m) (MPN: 374Z-03853)
(Old Type No.: FTG 1087.00 S)
The TE / Jaquet DSF 2210.87 STV is a passive variable reluctance speed sensor engineered for reliable detection of rotational speeds in industrial and transportation applications. This sensor operates without external power, generating an analog sine wave output proportional to the speed of ferromagnetic targets such as gear teeth.
This model, with MPN 374Z-03853, is fitted with a 5-meter STV cable, which is rated for standard ambient temperatures—suitable for typical industrial environments. The STV designation distinguishes it from SHV variants, which are designed for high-temperature applications.
Key Features:
Sensor Type: Passive (Variable Reluctance)
Output Signal: Sine wave (frequency proportional to rotational speed)
Target Material: Ferromagnetic (e.g., steel gear teeth)
Housing: Rugged stainless steel for industrial durability
Cable Length: 5 meters, STV type for standard temperature ranges
Mounting: Threaded cylindrical housing for easy installation
Old Part Number: FTG 1087.00 S
Environmental Resistance: Suitable for standard industrial environments (shock, vibration, moisture)
Typical Applications:
Rail traction systems
Turbomachinery
Industrial drives and motors
Compressors and gearboxes
The DSF 2210.87 STV delivers consistent performance and long operational life, backed by TE / Jaquet’s reputation for sensor excellence.
TE / Jaquet Speed Sensor FTG 1087.01AH L225
MPN: 374Z-04455
Ferrostat speed sensor with integrated signal amplifier
The TE / Jaquet FTG 1087.01AH L225 is a high-quality industrial speed sensor designed for precise and reliable rotational speed detection in demanding environments.
This Ferrostat sensor features an integrated signal amplifier, ensuring high sensitivity and stable signal output even in challenging operating conditions.
Manufacturer: TE / Jaquet
Model: FTG 1087.01AH L225
MPN: 374Z-04455
Sensor type: Ferrostat speed sensor
Integrated amplifier: Yes
Length: 225 mm
Weight: Approx. 500 g
Key features
Ferrostat sensing technology
Integrated signal amplifier for enhanced performance
High sensitivity and reliable signal detection
Robust construction for industrial environments
Typical applications
Rotational speed monitoring
Engines and turbines
Gearboxes and rotating machinery
Industrial automation systems
Power generation equipment
Original Jaquet product
This is a genuine Jaquet product, supplied brand new in original manufacturer packaging.
Documentation
Datasheets, dimensional drawings, 3D STEP files, declarations of conformity, and certificates are available upon request.
