This auxiliary contact fits MRC 320, MRC 400/ DIN 640 socket/female/feminine/dose
Auxiliary contact for signal bypassing
1.5 mm² connection cross-section
Material: Electrolytic copper Cu-ETP in accordance with EN 13601
Silver-plated surface for ultimate connection
High electrical conductivity
Can be used with socket type REMA DIN MRC 320/400 and DIN 640 Ampere battery connectors. *MRC 400 is MRC 320 connector equipped with the RED coding pin mpn 109632
Same as 120748 which is the updated version of 103747
120748 will work as 103747 but the borehole on 120748 has more depth and therefore the insulation must be cut accordingly to solder the cable and contact.
120748 is the updated version of the old REMA catalog code 103747 / M9372071
Updated 120748 will work as 103747, but the borehole on 120748 has more depth and therefore the insulation must be cut accordingly to solder the cable and contact.
This is the updated version is this 120748
NEW version of the aux contact!
121556 is the version without any lead, lead-free brass with silver finish
120748 is the sunset version of this 121556, old REMA catalog code was 103747 / M9372071
Sunset 120748 will work as 103747, but the borehole on 120748 has more depth and therefore the insulation must be cut accordingly to solder the cable and contact. This updated 121556 is same as 120748, but has no lead in the brass of the contact.This is lead-free brass with silver finish.
REMA DIN 640 Handle
Fits both REMA DIN 640 Plug and Socket
REMA ITEM 108994/95800-11Includes:DIN 640 A handle, acid resistant4 screws + 4 nuts
Single packed in a ZIP-bag
REMA 95850-00 / 95850/00 DIN 640 240mm2 Plug
old catalog code 95850-00, marked 95850/00 on the product zip-bags.The new catalog code of this connector is 108995
Complete connector set including:
DIN 640 Plug housing
2x main contacts for 240mm2 wire/cable
The locking part (the square part in the middle)
Cable stress relief parts (2 clamps + 2 screws)
Grey coding pin for voltage indication
REMA 108995 / 95850-00 DIN 640 A plug 240mm² - grey coding - acid resistant
By default, this item does not include a handle. If you need a handle: the DIN 640 handle can be found here: REMA DIN 640 handle
This is the 640A plug/male/stecker/macho, used for charger/motor-side usually.
This is the original REMA DIN 640 high-power battery connector with an unrivaled current rating of 640 amps. The connector system has been specifically designed for the quick and opportunity charging of large battery capacities and corresponds to the DIN VDE 0632-589 and EN 1175-1.
POSSIBLE TO FIT 3 PAIRS OF AUXILIARY CONTACTSAs a special feature, it is possible to install an additional (third) pair of auxiliary contacts using the air-circulation pipes and the pilot contact kit.
REMA developed contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating to ensure a power transition with minimal losses and long life. The DIN 640 battery connector is suitable for a wide range of cable sizes. Cable can be crimped directly without using a reducing bushing. For best performance results and durability, the specially developed REMA Crimp die sets and tools should be used.
Direct crimping without reducing bushing for all cable sizes REMA die sets and tools provide the best performance and durability.Please ask for tools from our sales team.
Browse all REMA Connectors here
REMA 95850-10 DIN 640 120mm2 Plug
old catalog code was 95850-10, and is still marked as 95850/10 on the product zip-bags.
The new catalog code of this connector is 111160
Complete connector set including:
DIN 640 Plug housing
2x main contacts for 120mm2 wire/cable
The locking part (the square part in the middle)
Cable stress relief parts (2 clamps + 2 screws)
Grey coding pin for voltage indication
REMA 111160 / 95850-10 DIN 640 A plug 120mm² - grey coding - acid resistant
By default, this item does not include a handle. If you need a handle: the DIN 640 handle can be found here: REMA DIN 640 handle
This is the 640A plug/male/stecker/macho, used for charger/motor-side usually.
This is the original REMA DIN 640 high-power battery connector with an unrivaled current rating of 640 amps. The connector system has been specifically designed for the quick and opportunity charging of large battery capacities and corresponds to the DIN VDE 0632-589 and EN 1175-1.
POSSIBLE TO FIT 3 PAIRS OF AUXILIARY CONTACTSAs a special feature, it is possible to install an additional (third) pair of auxiliary contacts using the air-circulation pipes and the pilot contact kit.
REMA developed contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating to ensure a power transition with minimal losses and long life. The DIN 640 battery connector is suitable for a wide range of cable sizes. The cable can be crimped directly without using a reducing bushing. For best performance results and durability, the specially developed REMA Crimp die sets and tools should be used.
Direct crimping without reducing bushing for all cable sizes REMA die sets and tools provide the best performance and durability.
Please ask for tools from our sales team.
Browse all REMA Connectors here
REMA 95850-20 / 95850/20 DIN 640 95mm2 Plug
old catalog code 95850-20, marked 95850/20 on the product zip-bags.
The new catalog code of this connector is 111161
Complete connector set including:
DIN 640 Plug housing
2x main contacts for 95mm2 wire/cable
The locking part (the square part in the middle)
Cable stress relief parts (2 clamps + 2 screws)
Grey coding pin for voltage indication
REMA 111161 / 95850-20 DIN 640 A plug 95mm² - grey coding - acid resistant
By default, this item does not include a handle. If you need a handle: the DIN 640 handle can be found here: REMA DIN 640 handle
This is the 640A plug/male/stecker/macho, used for charger/motor-side usually.
This is the original REMA DIN 640 high-power battery connector with an unrivaled current rating of 640 amps. The connector system has been specifically designed for the quick and opportunity charging of large battery capacities and corresponds to the DIN VDE 0632-589 and EN 1175-1.
POSSIBLE TO FIT 3 PAIRS OF AUXILIARY CONTACTSAs a special feature, it is possible to install an additional (third) pair of auxiliary contacts using the air-circulation pipes and the pilot contact kit.
REMA developed contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating to ensure a power transition with minimal losses and long life. The DIN 640 battery connector is suitable for a wide range of cable sizes. Cable can be crimped directly without using a reducing bushing. For best performance results and durability, the specially developed REMA Crimp die sets and tools should be used.
Direct crimping without reducing bushing for all cable sizes REMA die sets and tools provide the best performance and durability.Please ask for tools from our sales team.
Browse all REMA Connectors here
REMA 95850-30 / 95850/30 DIN 640 70mm2 Plug
old catalog code 95850-30, marked 95850/30 on the product zip-bags.The new catalog code of this connector is 111162
Complete connector set including:
DIN 640 Plug housing
2x main contacts for 95mm2 wire/cable
The locking part (the square part in the middle)
Cable stress relief parts (2 clamps + 2 screws)
Grey coding pin for voltage indication
REMA 111162 / 95850-30 DIN 640 A plug 70mm² - grey coding - acid resistant
By default, this item does not include a handle. If you need a handle: the DIN 640 handle can be found here: REMA DIN 640 handle
This is the 640A plug/male/stecker/macho, used for charger/motor-side usually.
This is the original REMA DIN 640 high-power battery connector with an unrivaled current rating of 640 amps. The connector system has been specifically designed for the quick and opportunity charging of large battery capacities and corresponds to the DIN VDE 0632-589 and EN 1175-1.
POSSIBLE TO FIT 3 PAIRS OF AUXILIARY CONTACTSAs a special feature, it is possible to install an additional (third) pair of auxiliary contacts using the air-circulation pipes and the pilot contact kit.
REMA developed contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating to ensure a power transition with minimal losses and long life. The DIN 640 battery connector is suitable for a wide range of cable sizes. Cable can be crimped directly without using a reducing bushing. For best performance results and durability, the specially developed REMA Crimp die sets and tools should be used.
Direct crimping without reducing bushing for all cable sizes REMA die sets and tools provide the best performance and durability.Please ask for tools from our sales team.
Browse all REMA Connectors here
REMA 102691/75595-55DIN 320 & DIN640 Amp aux cont. for plug
Original REMA auxiliary contact to be installed in 320A plug EURO DIN housing.
informationThis is a single contact pin, normally you need 2 pieces on one plug housing. The contact part of this single contact is the same as on the pilot contacts, which are sold with a plastic adapter and small plastic screw. See the DIN320/DIN640 pilot contact kit here.
REMA DIN 640 150mm2 Plug
The new catalog code of this connector is 113004
Complete connector set including:
DIN 640 Plug housing
2x main contacts for 150mm2 wire/cable
The locking part (the square part in the middle)
Cable stress relief parts (2 clamps + 2 screws)
Grey coding pin for voltage indication
By default, this item does not include a handle. If you need a handle: the DIN 640 handle can be found here: REMA DIN 640 handle
This is the 640A plug/male/stecker/macho, used for charger/motor-side usually.
This is the original REMA DIN 640 high-power battery connector with an unrivaled current rating of 640 amps. The connector system has been specifically designed for the quick and opportunity charging of large battery capacities and corresponds to the DIN VDE 0632-589 and EN 1175-1.
POSSIBLE TO FIT 3 PAIRS OF AUXILIARY CONTACTSAs a special feature, it is possible to install an additional (third) pair of auxiliary contacts using the air-circulation pipes and the pilot contact kit.
REMA developed contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating to ensure a power transition with minimal losses and long life. The DIN 640 battery connector is suitable for a wide range of cable sizes. Cable can be crimped directly without using a reducing bushing. For best performance results and durability, the specially developed REMA Crimp die sets and tools should be used.
Direct crimping without reducing bushing for all cable sizes REMA die sets and tools provide the best performance and durability.Please ask for tools from our sales team.
Browse all REMA Connectors here
REMA DIN 640 150mm2 Socket
The new catalog code of this connector is 113003
Complete connector set including:
DIN 640 Socket housing
2x main contacts for 150mm2 wire/cable
The locking part (the square part in the middle)
Cable stress relief parts (2 clamps + 2 screws)
Grey coding pin for voltage indication
By default, this item does not include a handle. If you need a handle: the DIN 640 handle can be found here: REMA DIN 640 handle
This is the 640A plug/male/stecker/macho, used for charger/motor-side usually.
This is the original REMA DIN 640 high-power battery connector with an unrivaled current rating of 640 amps. The connector system has been specifically designed for the quick and opportunity charging of large battery capacities and corresponds to the DIN VDE 0632-589 and EN 1175-1.
POSSIBLE TO FIT 3 PAIRS OF AUXILIARY CONTACTSAs a special feature, it is possible to install an additional (third) pair of auxiliary contacts using the air-circulation pipes and the pilot contact kit.
REMA developed contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating to ensure a power transition with minimal losses and long life. The DIN 640 battery connector is suitable for a wide range of cable sizes. Cable can be crimped directly without using a reducing bushing. For best performance results and durability, the specially developed REMA Crimp die sets and tools should be used.
Direct crimping without reducing bushing for all cable sizes REMA die sets and tools provide the best performance and durability.Please ask for tools from our sales team.
Browse all REMA Connectors here
This is the 640A Plug = Male version for charger / motor -side usually.
Select your wire diameter
(640A version contacts look a bit different from 320/160/80amp version)You can be sure about the type by looking at the housing.
does not include a handle. ADD handle
Versions for a complete 640A plug=male=stecker connector with main contacts are:
70 mm2 REMA DIN 640 A Plug = 95850-30 = new code 11116295 mm2 REMA DIN 640 A Plug = 95850-20 = new code 111161120 mm2 REMA DIN 640 A Plug = 95850-10 = new code 111160240 mm2 REMA DIN 640 A Plug = 95850-00 = new code 108995
The Original REMA DIN 640 battery connector system complements the product lines REMA DIN 80, 160, 320 with a high power battery connector at an unrivaled current rating of 640 amps. The connector system has been specifcally designed for the quick and opportunity charging of large battery capacities and corresponds to the DIN VDE 0632-589 and EN 1175-1.
POSSIBLE TO FIT 2 PAIRS OF AUXILARY CONTACTSAs special feature, it is possible to install an additional (second) pair of auxiliary contacts to the standard version with 1 pair of auxiliary and pilot contacts. The REMA devoloped contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure a power transition with minimal losses and a long life. The DIN 640 battery connector is suitable for a wide range of cable sizes. Cables from 70 mm² to 240 mm² can be crimped directly without using a reducing bushing. For best performance results and durability, the special developed REMA Crimp die sets and tools should be used.
Product features and advantagesREMA HIGH-POWER BATTERY CONNECTOR DIN 640 Complements the product lines REMA DIN 80, 160, 320 with a high power Battery Connector at an unrivaled current rating of 640 amperes Specifically designed for the quick and opportunity charging of large battery capacities Corresponds to the DIN VDE 0632-589 and EN 1175-1 Up to 2 pair of auxiliary contacts and 1 pair of pilot contacts can be equipped per connector High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated sur-face and an anti-friction and tarnish coating ensure power transition with minimal losses long life Particularly preserved by acid-resistant construction Suitable for cable sizes from 70 mm² to 240 mm²
Direct crimping without reducing bushing for all cable sizes REMA die sets and tools provide best performance and durability. Please ask tools from our sales team.
Browse all REMA Connectors here
This is the 640A Socket = Female version for the battery side commonly.(640A version contacts look a bit different from 320/160/80amp version)You can be sure about the type by looking at the housing - it looks the same as 320/160/80amp versions compared to the socket.
See all REMA DIN 640 Connectors here
This product includes a complete connector with housing, locking part, cable stress relief, grey coding pin, and main contacts. As an accessory, you can pick also the handle and auxiliary and pilot contacts or/and the air adapter.
If you look for the opposite side of this connector, please find the plug-version here.
Versions for a complete 640A socket=female=dose connector with main contacts are:
70 mm2 REMA DIN 640 A Socket = 95950-3095 mm2 REMA DIN 640 A Socket = 95950-20120 mm2 REMA DIN 640 A Socket = 95950-10240 mm2 REMA DIN 640 A Socket = 95950-00
The Original REMA DIN 640 battery connector system complements the product lines REMA DIN 80, 160, and 320 with a high-power battery connector at an unrivaled current rating of 640 amps. The connector system has been specifically designed for the quick and opportunity charging of large battery capacities and corresponds to the DIN VDE 0632-589 and EN 1175-1.
POSSIBLE TO FIT 2 PAIRS OF AUXILIARY CONTACTSAs a special feature, it is possible to install an additional (second) pair of auxiliary contacts to the standard version with 1 pair of auxiliary and pilot contacts. The REMA developed contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure a power transition with minimal losses and a long life. The DIN 640 battery connector is suitable for a wide range of cable sizes. Cables from 70 mm² to 240 mm² can be crimped directly without using a reducing bushing. For best performance results and durability, the specially developed REMA Crimp die sets and tools should be used.
Product features and advantagesREMA HIGH-POWER BATTERY CONNECTOR DIN 640 Complements the product lines REMA DIN 80, 160, 320 with a high power Battery Connector at an unrivaled current rating of 640 amperes Specifically designed for the quick and opportunity charging of large battery capacities Corresponds to the DIN VDE 0632-589 and EN 1175-1 Up to 2 pair of auxiliary contacts and 1 pair of pilot contacts can be equipped per connector High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life Particularly preserved by acid-resistant construction Suitable for cable sizes from 70 mm² to 240 mm²
Direct crimping without reducing bushing for all cable sizes REMA die sets and tools provide the best performance and durability. Please ask for tools from our sales team.
Browse all REMA Connectors here
REMA 640 Amp main contact for Socket = female
Sold as these versions:70mm2 (AWG 2/0)95mm2 (AWG 3/0)120mm2 (AWG 4/0)240mm2 (240 mm2 delivery time 2 work days)
