Search results for "micropower dc/dc"

Product overviewONE Light LED Driver 89320X.320W 48V DC constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications Product code: 89320X Type: LED Driver Category: 22 Drivers Family: The 48V DC Range Constant voltage Material: Plastic Length: 210mm Width: 80mm Height: 37mm Warranty: 5 Years Downloads & links Datasheet Manufacturer page

Read more less

Albright SW80-753PE Also known and sold as SOLENOID 24V 80AMP HALDEX SW80-753PE This is the original Albright made, genuine SW80-753PE Albright 24V INT Single Pole Single Throw Contactor. The SW80-753PE, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks a

Read more less

Magnetic Blowouts These open case contactors are of double break configuration and are fitted with magnetic blowouts - denoted by 'B' suffix in the SW60B range) across both contact gaps. These enable high currents to be ruptured very quickly so that arcing time is reduced to a minimum. Fitting of blowouts makes the contacts polarity sensitive and the positive markings on the top cover of the contactor must be observed.About Continuous - CO.) SW60B Solenoids Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods. The SW60B features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SW60B has M6 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be on the side or base of the contactor.

Read more less

Albright SW80B-1648 Single-Acting Solenoid Contactor Specifications: • Voltage: 125V continuous • Mounting: Integral bracket fitted • Winding: Vacuum-impregnated • Insulation: Coil insulators fitted • Connections: 24-inch long flying leads coil connection Features: • Design: The SW80 series is designed for direct current loads, particularly for motors used in small electric vehicles like light industrial trucks and powered invalid cars. • Contacts: Equipped with double-breaking contacts with Silver-alloy contact tips, which are weld-resistant, hardwearing, and offer excellent conductivity. • Cost: Economically priced, they compare favorably with sealed automotive-style solenoid switches that cannot be serviced or inspected for contact wear. • Auxiliary Switch Kit: Part number 2070-124. Dimensions: • Height: 94mm (including terminals and coil base cap) • Coil Width: 41mm • Cap Width: 50.5mm • Cap Depth: 39mm Magnetic Blowouts: • These contactors have a double break configuration with magnetic blowouts (denoted by the ‘B’ suffix in the SW80 range) across both contact gaps. This allows for quick rupture of high currents, minimizing arcing time. Note that the blowouts make the contacts polarity sensitive, and the positive markings on the top cover must be observed. Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods. The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via the integral bracket formed into the coil housing case. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards. Specifications Device Type NO - SP - ST Voltage 125V D.C. Coil Type Continuous Amps 100 Amps Coil Resistance (Ohms) 1500 Pull-In Voltage (V) 75.0 Max. Drop Out Voltage (V) 32.0 Max. Coil Power Dissipation (W) 10.42 Typical Pull-In Time 20ms Typical Voltage Drop Per PoleAcross New Contacts At 100A 40mV Operating Ambient Temperature -40 to +60℃ Weight 430g Application Interrupted Uninterrupted Thermal Current Rating 100A 125A Intermittent Current Rating: 30% Duty 185A 230A 40% Duty 160A 200A 50% Duty 140A 175A 60% Duty 130A 160A 70% Duty 120A 150A

Read more less

Genuine SW80-390P Albright Contactor. The SW80-390P, a Albright SW80 -series contactor with IP66 protection - P), has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks as well as

Read more less

Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods. The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via the integral bracket formed into the coil housing case. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.

Read more less

About Intermittent - Int.) SW60 Solenoids Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods. Magnetic Latching: Contact position is secured with the use of a permanent magnet within the coil assembly. The coil requires a pulse to close the contacts, and a reverse polarity pulse to operate the armature and open the contacts, but otherwise remains in the last energised state without the need for power. It should be noted therefore these are not failsafe. The SW60 features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SW60 has M6 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be on the side or base of the contactor.

Read more less

75W 12V DC Constant Voltage LED driver. Complies with standard EN61347-1 and any other specific standards.

Read more less

Additional Information Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.The main contact circuit has a built-in fail-safe, so that if both coils are energised simultaneously the contact arrangement is open circuit. The DC66P has double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The DC66P has M6 main stud terminals and coil connections are by means of 6.3mm spades.

Read more less

Albright SW80-2017T 12V CO = Continuous SW80-2017T Albright 12V Single Pole Single Throw Contactor. The SW80-2017T9, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks. SW80-2017T has enclosed top cover (moving contacts are not visible, prevents some dust and dirt getting on the contact surfaces) + side panel for fuse

Read more less

40W 24V DC TRIAC dimmable constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.

Read more less

240W 48V DC Dinrail constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.

Read more less