Product overviewONE Light LED Driver 89350VN.350W 24V DC constant voltage driver Open Range with fan, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89350VN
Type: LED Driver
Category: 22 Drivers
Family: The 24V DC Open Range Constant voltage
Material: Metal
Length: 217mm
Width: 115mm
Height: 30mm
Warranty: 3 Years
Downloads & links
Datasheet
Manufacturer page
SW80-6 Albright 24V Solenoid Switch. The SW80-6, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks.
Genuine SW80A-182 Albright 24V Single Pole Single Throw Contactor. a Albright SW80 -series contactor with Auxilary contacts - A) fitted, has been developed for direct current loads, including motors as used on different kind of electric vehicles like indus
Product overviewONE Light LED Driver 89090VR.90W 24V DC Dinrail constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89090VR
Type: LED Driver
Category: 22 Drivers
Family: The DIN RAIL Drivers
Material: Plastic
Length: 68mm
Width: 92mm
Height: 58mm
Warranty: 3 Years
Downloads & links
Datasheet
Manufacturer page
Genuine SW80B-6 Albright 24V Solenoid Switch. The SW80B-6, a Albright SW80 -series contactor with magnetic blowouts - B) fitted, has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial tr
Genuine SW200-336 ALBRIGHT 24V 250A CO DC - COntactor. The SW200-336, a SW200 series of contactor is designed for direct current loads. SW200 have double breaking main contacts with silver alloy tips. Contact tips are weld resistant, extremely hard wearinga
10-100W 24V DC DALI and Push to dim dimmable constant voltage driver, suitable to install inside profile, IP20.
Complies with standard EN61347-1 and any other specific standards.
Albright HV500F-73S – High Voltage Electromechanical DC ContactorThe Albright HV500F-73S is a hermetically sealed electromechanical DC contactor in the HV500 family, designed to switch DC power using physical main contacts. It is not a solid-state relay. The listed 48V DC refers to the control-coil voltage, not the voltage switched by the main contacts.Key features
Electromechanical switching with normally open (NO) main contacts
Hermetically sealed high-voltage DC contactor design
HV500 family specifications include high-voltage operation up to 1000V DC, subject to application-dependent ratings
High-current switching for properly engineered DC circuits; verify continuous, making and breaking ratings for the specific operating conditions
Configuration and applicationsThe product listing identifies an intermittent-duty configuration; verify coil operating limits and duty cycle with the manufacturer's part-specific documentation.Typical application areas include electric vehicles, battery packs, DC charging, renewable energy, energy storage and industrial DC distribution, where the part's voltage and current capabilities meet system requirements.Engineering note: HV500 contactors do not replace external fuses, circuit breakers, or suitable pre-charge arrangements. Verify current and voltage under load, coil supply, operating duty, auxiliary contacts, mounting and environmental requirements for the exact model.Manufacturer reference: Albright HV500 product family.
Step-up voltage converter with medium power from 6V until 12V (wide \nrange) to 12V car line. For the simultaneous supply of permanent \npositive and ignition positive. The total current can be shared in any relation between both outputs.
▪ IN: 6V ... 12V / OUT: 24V▪ Connection: open cable end▪ 5A Permanent positive and ignition positive
Weight: 0.022 kg
Converts the input voltage of 6V until 12V (wide range) to 13V constant
Converts permanent positive (clamp 30) and switched positive (clamp 15)
Active reverse polarity protection, the fuse is not blown
Case waterproof
Overload protection by electronic fuse
Very low quiescent current (self-consumption) of 0.7mA only, no creeping discharge of the battery
Technical specifications:
Input\n voltage:
4 ... 15V DC
Input current:
11A at 6,0V at output current 5A
Output voltage:
13V DC +-5%
Output current:
5A permanent, 7A peak
Connection:
the connection cable is sealed in the device, open ending
Cable length:
about 200mm
Current without load:
0.7mA at 6V
Efficiency:
about 93% at 5A
Temperature range:
-40 ... +75°C
Electrical protection:
overcurrent, overtemperature, reverse polarity
Mechanical protection:
entirely sealed (IP69K)
Dimensions:
70 x 65 x 25mm
Mass:
about 220g
Technical principle:
ignition plus (term 15) connects the second output
