75W 24V DC constant voltage driver slim range ideal to install inside the profile, IP20.
Complies with standard EN61347-1 and any other specific standards.
60W 24V DC Push to dim dimmable constant voltage driver, suitable to install inside profile, IP20.
Complies with standard EN61347-1 and any other specific standards.
Product overviewONE Light LED Driver 89150VLT.30-150W 24V DC TRIAC dimmable constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89150VLT
Type: LED Driver
Category: New 2025 Edition 2
Family: Drivers
Material: Plastic
Length: 357mm
Width: 32mm
Height: 23mm
Warranty: 5 Years
Downloads & links
Datasheet
Manufacturer page
Albright SW80-116 24V DC CO (125A)
The SW80-116 Albright 125A Single Acting Solenoid Contactor 24V CO is an integral component designed for efficient and reliable power management in various applications, especially where robust and durable electrical switching is crucial. As part of Albright's SW80 series, this model is tailored for single-acting operations, but it operates at a higher voltage and slightly lower current capacity compared to other models within the series. This specificity makes it well-suited for a distinct set of requirements, particularly in 24V systems.
Key Features:
Voltage Rating: The SW80-116 is specifically designed for 24V systems, aligning it with applications that operate within this voltage range, such as certain electric vehicles, industrial equipment, and backup power systems.
Current Capacity: It is rated for 125A continuous current, making it capable of handling significant power loads while ensuring reliable operation in critical situations.
Single Acting (CO) Configuration: The term "CO" stands for "Change Over"; however, in the context of single-acting solenoids like the SW80-116, it typically refers to a device that has one active position when power is applied and returns to its default state when power is removed, facilitated by an internal spring mechanism.
Robustness: The device is built to endure harsh conditions, including high-vibration environments and temperature variations, without compromising performance.
Compact and Versatile: Its compact size combined with high switching capacity makes it versatile for a wide range of applications, from safety cut-offs to power distribution management.
Applications:
Given its specifications, the SW80-116 finds its use in several critical areas:
Industrial Automation: For controlling motors, pumps, and other heavy machinery in manufacturing and processing plants, where 24V control systems are prevalent.
Electric Vehicles (EVs): Suitable for specific types of EVs that utilize a 24V power system, managing the main power supply from the battery to the motor controller efficiently.
Backup Power Systems: In uninterruptible power supply (UPS) systems or emergency power systems where reliable switching between power sources is necessary.
Marine and Offshore: Its robust design ensures reliable operation in marine applications, controlling electrical systems on boats and offshore platforms.
Advantages:
Dependability: Albright's reputation for quality ensures that the SW80-116 is a reliable component for critical switching operations under various conditions.
Installation Ease: The design allows for straightforward integration into existing systems, facilitating quick setup and minimal downtime.
Safety Focused: Ensures a secure electrical connection, minimizing the risk of accidental disconnections or failures, which is paramount in preventing equipment damage or safety hazards.
Conclusion:
The SW80-116 Albright 125A Single Acting Solenoid Contactor 24V CO is a specialized device that serves as a cornerstone in applications requiring reliable, high-capacity electrical switching in 24V systems. Its robustness, versatility, and safety features make it an ideal choice for a broad spectrum of applications, including industrial automation, electric vehicles, backup power systems, and marine applications. By integrating the SW80-116 into their systems, professionals can ensure efficient and reliable operation, meeting the demanding requirements of modern electrical control and power management tasks.
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via the integral bracket formed into the coil housing case. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Step-up voltage converter with medium power from 6V until 12V (wide \nrange) to 12V car line. For the simultaneous supply of permanent \npositive and ignition positive. The total current can be shared in any relation between both outputs.
▪ IN: 6V ... 12V / OUT: 24V▪ Connection: open cable end▪ 5A Permanent positive and ignition positive
Weight: 0.022 kg
Converts the input voltage of 6V until 12V (wide range) to 13V constant
Converts permanent positive (clamp 30) and switched positive (clamp 15)
Active reverse polarity protection, the fuse is not blown
Case waterproof
Overload protection by electronic fuse
Very low quiescent current (self-consumption) of 0.7mA only, no creeping discharge of the battery
Technical specifications:
Input\n voltage:
4 ... 15V DC
Input current:
11A at 6,0V at output current 5A
Output voltage:
13V DC +-5%
Output current:
5A permanent, 7A peak
Connection:
the connection cable is sealed in the device, open ending
Cable length:
about 200mm
Current without load:
0.7mA at 6V
Efficiency:
about 93% at 5A
Temperature range:
-40 ... +75°C
Electrical protection:
overcurrent, overtemperature, reverse polarity
Mechanical protection:
entirely sealed (IP69K)
Dimensions:
70 x 65 x 25mm
Mass:
about 220g
Technical principle:
ignition plus (term 15) connects the second output
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.
Bracket fits round surfaces
Albright SW84-466L 12V DC
The Albright SW84-466L 12V Pump Contactor is a robust and dependable choice for efficient pump control. Known for its superior pump control performance, this contactor ensures smooth, uninterrupted operation, boosting productivity while helping to lower energy expenses.
Also known with the following references:
Logitrans 982097 - The Logitrans Albright SW84-466L 12V Pump Contactor is compatible with the following machine: Logitrans EHL1004
Magnetic Blowouts These open case contactors are of double break configuration and are fitted with magnetic blowouts - denoted by 'B' suffix in the SW60B range) across both contact gaps. These enable high currents to be ruptured very quickly so that arcing time is reduced to a minimum. Fitting of blowouts makes the contacts polarity sensitive and the positive markings on the top cover of the contactor must be observed.About Intermittent - Int.) SW60B Solenoids Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods. The SW60B features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SW60B has M6 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be on the side or base of the contactor.
Albright SW200A-11, 24 Volts DC 400 Amps single-acting contactor with magnetic blowouts and an auxiliary microswitch, continuous type coil is suitable for "main power" applications where on/off periods are long or always on.
Genuine SW200A-11 is Albright 24V 250A CO DC-type contactor. The SW200A-11 is a SW200 series of contactor is designed for direct current loads. SW200 have double breaking main contacts with silver alloy tips. Contact tips are weld resistant, extremely hard wearing.
This is equipped with Auxiliary contacts on the top.
Product overviewONE Light LED Driver 89040VT.40W 24V DC TRIAC dimmable constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89040VT
Type: LED Driver
Category: 22 Drivers
Family: The 24V DC Range TRIAC Dimmable Constant voltage
Material: Plastic
Length: 170mm
Width: 57mm
Height: 32mm
Warranty: 5 Years
Downloads & links
Datasheet
Manufacturer page
Product overviewONE Light LED Driver 89240VPL.24-240W 24V DC DALI & Push to DIM dimmable constant voltage driver, IP67. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89240VPL
Type: LED Driver
Category: New 2025 Edition 2
Family: Drivers
Material: Metal
Length: 408mm
Width: 37mm
Height: 22mm
Warranty: 5 Years
Downloads & links
Datasheet
Manual
Manufacturer page
SW180B-448L Albright 150A 12V INT 1-pole 1-throw Contactor
SW180B-448L, a SW180L series of contactors, equipped with magnetic blowouts - B and larger contact tips (L) and has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks
