High-end voltage converter with medium power for 12V devices at 24V car line.▪ IN: 24V / OUT: 12V▪ Connection: 3-pol plug▪ 10A\n\n \n \n \n Weight: 0.385 kg\n \n
\n
provides permanent plus (term. 30) or ignition plus (term. 15) up to the maximum load
concept of high development standard: - real voltage division, discharge protection of 12V device is effective -significant low self current consumption of 0,7 mA - very high efficiency of about 94%
overload capacity up to 15A for about 5 min.
small dimensions
compact plug (AMP Mate Lock)
5kW-peak-safety-diode to prevent overvoltage from car line
\n
\n \n
\n Input\n voltage:\n 16 ... 30V DC\n \n \n Output voltage:\n 8 ... 15V DC input voltage gets halved\n \n \n Output current:\n 10A permanent, 15A for about 5 min.\n \n \n Connection:\n 3-poles connector, round contacts (AMP Mate Lock)\n \n \n Current without load:\n 0,7mA at 24V\n \n \n Efficiency:\n app. 94%\n \n \n Temperature range:\n -40 ... +75°C, derating T>45°C\n \n \n Electrical protection:\n overcurrent, overtemperature, input transients\n \n \n Mechanical protection:\n entirely sealed\n \n \n Dimensions:\n 129 x 70 x 25mm incl. Plug\n \n \n Mass:\n app. 385g\n \n \n Technical principle:\n ignition plus (term 15) connects the second output\n \n
Albright HV500 – High Voltage Electromechanical DC ContactorThe Albright HV500 is a hermetically sealed electromechanical DC contactor in the HV500 family, designed to switch DC power using physical main contacts. It is not a solid-state relay. The coil voltage depends on the exact ordered configuration.Key features
Electromechanical switching with normally open (NO) main contacts
Hermetically sealed high-voltage DC contactor design
HV500 family specifications include high-voltage operation up to 1000V DC, subject to application-dependent ratings
High-current switching for properly engineered DC circuits; verify continuous, making and breaking ratings for the specific operating conditions
Configuration and applicationsThis is a general HV500-series listing. Confirm the exact order code and coil voltage before selection.Typical application areas include electric vehicles, battery packs, DC charging, renewable energy, energy storage and industrial DC distribution, where the part's voltage and current capabilities meet system requirements.Engineering note: HV500 contactors do not replace external fuses, circuit breakers, or suitable pre-charge arrangements. Verify current and voltage under load, coil supply, operating duty, auxiliary contacts, mounting and environmental requirements for the exact model.Manufacturer reference: Albright HV500 product family.
Product overviewONE Light LED Driver 89240VL.240W 24V DC constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89240VL
Type: LED Driver
Category: New 2025 Edition 2
Family: Drivers
Material: Plastic
Length: 320mm
Width: 30mm
Height: 18mm
Warranty: 5 Years
Downloads & links
Datasheet
Manufacturer page
150W 24V DC constant voltage driver slim range ideal to install inside the profile, IP20.
Complies with standard EN61347-1 and any other specific standards.
DC66-9P 12V Albright Additional Information
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods. The main contact circuit has a built-in fail-safe, so that if both coils are energised simultaneously the contact arrangement is open circuit. The DC66P has double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The DC66P has M6 main stud terminals and coil connections are by means of 6.3mm spades.
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.The SW200 has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks. Developed for both interrupted and uninterrupted loads, the SW200 is suitable for switching Resistive, Capacitive, and Inductive loads. The SW200 features single pole single throw, double-breaking main contacts with silver alloy tips, which are weld resistant, hardwearing, and have excellent conductivity. The SW200 has M10 stud main terminals and 6.3mm spade coil connections. It can be mounted via M5 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be horizontal or vertical, when vertical the M10 contact studs should point upwards.
High-end voltage converter with low power for 12V devices at 24V car \nline. For the simultaneous supply of permanent plus and ignition plus. An ideal solution for point of device supply like telematics and GPS \nwireless alarm systems. Fixed voltage 13.6V.▪ IN: 24V / OUT: 13.6V▪ Connection: 5-pol plug▪ 4A Permanent positive and ignition positive\n\n \n \n \n Weight: 0.19 kg\n \n
\n
concept of high development standard: - Fixed voltage 13.6V - significant low self current consumption of 0,7mA - very high efficiency of about 94%
overload capacity up to 6A for about 5 min.
small dimensions
compact plug, sealing option
5kW-peak-safety-diode to prevent overvoltage from car line
electronic protection against reverse polarity without the need of a fuse
\n
\n \n
\n Input\n voltage:\n 16 ... 30V DC\n \n \n Output voltage:\n 13.6V +-5%\n \n \n Output current:\n 4A permanent, 6A for about 5 min.\n \n \n Connection:\n 5-poles connector, Mate Lock with sealing option\n \n \n Cable length:\n _\n \n \n Current without load:\n 0,7mA at 24V\n \n \n Efficiency:\n app. 94%\n \n \n Temperature range:\n -40 ... +75°C, derating T>45°C\n \n \n Electrical protection:\n overcurrent, overtemperature, input transients, polarity\n \n \n Mechanical protection:\n entirely sealed\n \n \n Dimensions:\n 80 x 70 x 25mm incl. Plug\n \n \n Mass:\n app. 190g\n \n \n Technical principle:\n ignition plus (term 15) connects the second output\n \n
Product overviewONE Light LED Driver 89090VL.10-90W 24V DC DALI and Push to dim dimmable constant voltage driver, IP20.Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89090VL
Type: LED Driver
Category: New 2025 Edition 3
Family: Drivers
Material: Plastic
Length: 140mm
Width: 80mm
Height: 35mm
Warranty: 5 Years
Downloads & links
Datasheet
Manual
Manufacturer page
