Product overviewONE Light LED Driver 89240XL.240W 48V DC constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89240XL
Type: LED Driver
Category: New 2025 Edition 2
Family: Drivers
Material: Plastic
Length: 320mm
Width: 30mm
Height: 18mm
Warranty: 5 Years
Downloads & links
Datasheet
Manufacturer page
High-end voltage converter of a higher power for 12V consumers at a 24V car line.
▪ IN: 24V / OUT: 12V▪ Connection: 5-pol plug▪ 26A Permanent positive and ignition positive
Weight: 0.96 kg\n \n
provides permanent plus (term.30) or ignition plus (term.15)
concept of high development standard:- real voltage division, discharge protection of 12V device is effective- significant low self current consumption of 0,7mA- very high efficiency of about 92%
overload capacity up to 24A for about 5 min.
small dimensions
high-quality high-power-plug, waterproof, the counterpart is included
5kW-peak-protection-diode to prevent overvoltage coming from the car line
Input\n voltage:
16 ... 30V DC
Output voltage:
8 ... 15V DC input voltage gets halved
Output current:
26A permanent, 35A for about 5 min.
Connection:
5-pole plug "Anderson Powerpole Modular"
Cable length:
app. 170mm
Current without load:
0,7mA at 24V
Efficiency:
app. 92%
Temperature range:
-40 ... +75°C, derating T>45°C
Electrical protection:
overcurrent, overtemperature, input transients
Mechanical protection:
entirely sealed
Dimensions:
200 x 70 x 40mm without cable outlet
Mass:
app. 960g
Technical principle:
ignition plus (term. 15) switches 2nd outlet
SW180AB-48 Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
info: image of SW180A-48 which is exact same external look, this SW180AB-48 has B as extra = blowout magnets inside the top cover
The SW180AB has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks. Developed for both interrupted and uninterrupted loads, the SW180B is suitable for switching Resistive, Capacitive, and Inductive loads.
The SW180AB features single pole single throw, double-breaking main contacts with silver alloy tips, which are weld resistant, hardwearing, and have excellent conductivity. The SW180B has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via M5 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Jaquet Zero Speed DSY 1205.01 AHW 374Z-05124
The DSY 1205.01 AHW [8 .. 32 VDC, PP] Hall sensor is suitable, in conjunction with a pole wheel, for generating square wave signals proportional to rotary speeds. It has a static behavior, so that pulse generation is guaranteed down to a speed corresponding to a frequency of 0Hz. The monitoring element consists of a magnetically biased hall effect semiconductor. Several amplifier variants are offered for covering a wide application range. The internal two-channel structure means that the sensor must be oriented. The sensors have a special orientation sleeve with pin for ease of installation.
Length: 75 mmWeight: 32 grams
The notation "8 .. 32 VDC, PP" indicates the power supply requirements for the device.
"8 .. 32 VDC" suggests that the device operates with a direct current (DC) voltage supply within the range of 8 to 32 volts. This means it can be powered by any DC source within this voltage range.
"PP" stand for "Peak-to-Peak" voltage, indicating the peak-to-peak voltage of the signal the device is capable of handling.
High-end voltage converter with medium power for 12V devices at 24V car
line. For the simultaneous supply of permanent plus and ignition plus.▪ IN: 24V / OUT: 12V▪ Connection: 5-pol plug▪ 10A Permanent positive and ignition positive
Weight: 0.385 kg
provides permanent plus (term. 30) and ignition plus (term. 15) up to the maximum load
concept of high development standard: - real voltage division, discharge protection of 12V device is effective - significant low self current consumption of 0,7 mA - very high efficiency of about 94%
overload capacity up to 15A for about 5 min.
small dimensions
compact plug (AMP Mate Lock)
5kW-peak-safety-diode to prevent overvoltage from car line
Input
voltage:
16 ... 30V DC
Output voltage:
8 ... 15V DC input voltage gets halved
Output current:
10A permanent, 15A for about 5 min.
Connection:
5-poles connector, round contacts (AMP Mate Lock)
Current without load:
0,7mA at 24V
Efficiency:
app. 94%
Temperature range:
-40 ... +75°C, derating T>45°C
Electrical protection:
overcurrent, overtemperature, input transients
Mechanical protection:
entirely sealed
Dimensions:
129 x 70 x 25mm incl. Plug
Mass:
app. 385g
Technical principle:
ignition plus (term 15) connects the second output
DC182-656 Albright Motor Reversing Solenoid
The DC182-656 Albright 150A 12V DC - INT Motor Reversing Contactor is a robust electrical component designed for controlling the direction of rotation of a motor in applications that require a 12-volt DC power supply. Here's a breakdown of its specifications:
DC182-656: This alphanumeric code serves as the specific model number or identifier for this contactor within Albright's product range.
Albright: Albright is the manufacturer of this contactor. They are recognized for producing high-quality electrical components, including contactors, solenoids, and related products.
150A: This indicates the maximum current rating of the contactor, which is 150 amperes. It specifies the maximum amount of current that the contactor is designed to handle safely during operation.
12V DC: This specifies the voltage rating of the contactor. It is designed to operate with a DC voltage of 12 volts, meaning that the coil within the contactor is powered by a 12-volt DC power supply.
INT: Similar to the previous examples, "INT" suggests that this contactor is suitable for intermittent or interruptible operations, meaning it can handle applications where the current flow may vary or be temporarily interrupted.
Motor Reversing Contactor: This indicates the primary function of the contactor, which is to control the direction of rotation of a motor. By reversing the polarity of the current flow, the contactor enables the motor to change its direction of rotation.
This contactor is well-suited for various industrial and automotive applications where precise control over motor direction is required. With its 150-ampere current rating and 12-volt DC voltage compatibility, it can effectively manage the demands of motors in diverse settings.
In summary, the DC182-656 Albright 150A 12V DC - INT Motor Reversing Contactor is a high-quality electrical component designed by Albright for controlling motor direction in applications requiring a 12-volt DC power supply. It offers reliability, durability, and precise control, making it a suitable choice for a wide range of industrial and automotive applications.
DC182 has M8 stud main terminals and 6.3mm spade coil connections. Mounted using brackets available separately via the M5 mounting holes - 16 off, 8 per side), mounting of the solenoids can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Replacement data:DC182-656 can be used to replace DC182-116
Flexible LED light strip, with SMD2835 LEDs, 33W/meter. Supplied in 5 meters roll with white PCB and double adhesive tape for a better fixing.
Can be cut every 2,5cm (8-LED segment).
Requires 24V DC constant voltage LED driver.
Complies with standard EN60598-1 and any other specific standards.
Albright DC66-73P 24V DC HO
80 Amps motor-reversing switch solenoid, very intermittent coil.
The DC66P series, which includes compact 80A contactors, is designed in alignment with the proven SW60 mono-block contactors, specifically tailored for motor reversing applications. These contactors are particularly well-suited for use in small battery-powered winches, windlass winches, vehicle-mounted cranes, and small electric vehicles, among other applications. The contactors feature enclosed contact housings and are sealed to prevent the entry of moisture or other contaminants, making them suitable for environments requiring IP66 protection.
The construction of these contactors adheres to the highest standards of quality, utilizing top-grade materials such as phenolic contact housings, silver-alloy contacts, and Class H (180°C) winding wire for the coils, ensuring durability and reliability in demanding applications. It is important to note that a repair kit is not available for this unit, emphasizing the contactor's reliability and maintenance-free design tailored for critical applications with a very intermittent coil version, operating at a 10% duty cycle.
Dimensions:
Height including terminals and coil base cap: 87.9 mm.
Width: 63.9 mm.
Depth (including bracket): 47.2 mm.
Technical specification:
Type : DC66-73PCoil Voltage (V) 24 HO DCCoil Resistance (Ohms) 31Pull In Voltage (V) 15.0 MaximumDrop Out Voltage (V) 6.0 MaximumCoil Power Dissipation (W) 18.58Additional Features: -
All figures above are stated at 20 degrees Celsius.
Additional Information
Very Intermittent contactors by design are mostly used for hydraulic functions on vehicles. They make and break much quicker than continuous solenoids and are not recommended for prolonged contact periods.
The DC66P is a compact contactor that adheres to the design principles of Albright mono block contactors, specifically tailored for the purpose of motor reversing. This device is designed for use with Direct Current (DC) loads and is fully compatible with contemporary electronic control systems. It boasts an IP66 seal, making it perfectly suited for applications that include battery-powered winches, vehicle-mounted cranes, and small electric vehicles. Engineered to handle both interrupted and uninterrupted loads, the DC66P can efficiently manage Resistive, Capacitive, and Inductive loads.
It features a built-in fail-safe mechanism within the main contact circuit, ensuring that in instances where both coils are energized at the same time, the contact arrangement remains in an open circuit condition. The main contacts of the DC66P utilize a double breaking mechanism with tips made of silver alloy, providing resistance to welding, durability, and superior conductivity. The device includes M6 main stud terminals for connections, while the coil connections are facilitated through 6.3mm spade terminals.
