High-end voltage converter with medium power for 12V devices at 24V car line.▪ IN: 24V / OUT: 12V▪ Connection: cable with open ends▪ 10A\n \n\n \n \n\n \n \n \n Weight: 0.385 kg\n \n
\n
provides permanent plus (term. 30) or ignition plus (term. 15) up to the maximum load
concept of high development standard: - real voltage division, discharge protection of 12V device is effective -significant low self current consumption of 0,7 mA - very high efficiency of about 94%
overload capacity up to 15A for about 5 min.
small dimensions
connected with 3 pin sheathed cable
5kW-peak-safety-diode to prevent overvoltage from car line
\n \n
\n Input\n voltage:\n 16 ... 30V DC\n \n \n Output voltage:\n 8 ... 15V DC input voltage gets halved\n \n \n Output current:\n 10A permanent, 15A for about 5 min.\n \n \n Connection:\n cable with open ends\n \n \n Cable length:\n about 1000mm 3x1,5mm²\n \n \n Current without load:\n 0,7mA at 24V\n \n \n Efficiency:\n app. 94%\n \n \n Temperature range:\n -40 ... +75°C, derating T>45°C\n \n \n Electrical protection:\n overcurrent, overtemperature, input transients\n \n \n Mechanical protection:\n entirely sealed (IP69K)\n \n \n Dimensions:\n 120 x 70 x 25mm\n \n \n Mass:\n app. 385g\n \n
Flexible tile, 10W ideal for cover walls and columns .
Supplied in 480mmx240mm pcs in white PCB and double adhesive tape for a better fixing.
Complete with 2pcs power supply cable and 2pcs tile connectors.
Connect max up to 10pcs with one driver.
Requires 24V DC constant voltage LED driver.
Complies with standard EN60598-1 and any other specific standards.
About the DC88B-467L Motor Reversing Solenoid
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.
The main contact circuit, designed for motor reversing, has a built-in failsafe, so that if both coils are energized simultaneously the contact arrangement is open circuit. Coil connections are by means of 6.3mm spades and mounting is via M4 screws on a panel fixture or using an additional bracket - e.g. part number: 2070-41) and can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Genuine SU280B-1015 ALBRIGHT 80V 250A INT DC - COntactor. The SU280B-1015, a Albright SU280 series of cotactor with magnetic blowouts fitted - B) has been designed for direct current loads, particularly motors as used on electronic vehicles such as industria
About the DC88-286L Motor Reversing SolenoidIntermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.The main contact circuit, designed for motor reversing, has a built-in failsafe, so that if both coils are energised simultaneously the contact arrangement is open circuit. Coil connections are by means of 6.3mm spades and mounting is via M4 screws on a panel fixture or using an additional bracket - e.g. part number: 2070-41) and can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
High-end voltage converter with low power for 12V devices at 24V car
line. For the simultaneous supply of permanent plus and ignition plus. An ideal solution for point of device supply like telematics and GPS
wireless alarm systems. Fixed voltage 13.6V.▪ IN: 24V / OUT: 13.6V▪ Connection: 5-pol plug▪ 4A Permanent positive and ignition positive
Weight: 0.19 kg
concept of high development standard: - Fixed voltage 13.6V - significant low self current consumption of 0,7mA - very high efficiency of about 94%
overload capacity up to 6A for about 5 min.
small dimensions
compact plug, sealing option
5kW-peak-safety-diode to prevent overvoltage from car line
electronic protection against reverse polarity without the need of a fuse
Input
voltage:
16 ... 30V DC
Output voltage:
13.6V +-5%
Output current:
4A permanent, 6A for about 5 min.
Connection:
5-poles connector, Mate Lock with sealing option
Cable length:
_
Current without load:
0,7mA at 24V
Efficiency:
app. 94%
Temperature range:
-40 ... +75°C, derating T>45°C
Electrical protection:
overcurrent, overtemperature, input transients, polarity
Mechanical protection:
entirely sealed
Dimensions:
80 x 70 x 25mm incl. Plug
Mass:
app. 190g
Technical principle:
ignition plus (term 15) connects the second output
Genuine DC92-230P ALBRIGHT 24V 100A INT DC - COntactor. The DC92-230P, a DC92P series of contactors has been designed for direct current loads, particularly motors as used on electric vehicles such as industrial trucks. The DC92P is a monoblock constructio
About the DC88-479L Motor Reversing Solenoid
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.The main contact circuit, designed for motor reversing, has a built-in failsafe, so that if both coils are energised simultaneously the contact arrangement is open circuit. Coil connections are by means of 6.3mm spades and mounting is via M4 screws on a panel fixture or using an additional bracket - e.g. part number: 2070-41) and can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
High-end voltage converter with low power for 12V devices at 24V car \nline. For the simultaneous supply of permanent plus and ignition plus. An ideal solution for point of device supply like telematics and GPS \nwireless alarm systems.▪ IN: 24V / OUT: 12V▪ Connection: 5-pol plug▪ 4A Permanent positive and ignition positive\n\n \n \n \n Weight: 0.19 kg\n \n
\n
concept of high development standard: -real voltage division, discharge protection of 12V device is effective - significant low self current consumption of 0,7mA - very high efficiency of about 94%
overload capacity up to 6A for about 5 min.
small dimensions
compact plug, sealing option
5kW-peak-safety-diode to prevent overvoltage from car line
electronic protection against reverse polarity without the need of a fuse
\n
\n \n
\n Input\n voltage:\n 16 ... 30V DC\n \n \n Output voltage:\n 8 ... 15V DC input voltage gets halved\n \n \n Output current:\n 4A permanent, 6A for about 5 min.\n \n \n Connection:\n 5-poles connector, Mate Lock with sealing option\n \n \n Cable length:\n _\n \n \n Current without load:\n 0,7mA at 24V\n \n \n Efficiency:\n app. 94%\n \n \n Temperature range:\n -40 ... +75°C, derating T>45°C\n \n \n Electrical protection:\n overcurrent, overtemperature, input transients, polarity\n \n \n Mechanical protection:\n entirely sealed\n \n \n Dimensions:\n 80 x 70 x 25mm incl. Plug\n \n \n Mass:\n app. 190g\n \n \n Technical principle:\n ignition plus (term 15) connects second output\n \n
