Genuine SW180B-4 ALBRIGHT 24V 150A CO DC - COntactor. The SW180B-4, a SW180 series of contactor, equipped with magnetic blowouts - B) has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks. SW180
Jaquet 384Z-05601 (T501.10)
The Jaquet T501 (previously also T500) is a two-channel tachometer for demanding machine monitoring applications. The unit has a measuring range of 0.025 Hz to 50 kHz and gives a 4-20 mA output signal that can be configured via the supplied Windows software.
Input and output signals
2 frequency inputs (speed signals) and 2 binary inputs.
2 analog outputs, 2 open collector outputs and 4 relays.
Features
The T501 has programmable logic, diagnostic functions and measurement functions, a fast response time of 8 ms and contains 4 parameter sets with 6 system limits each for virtually unlimited applications.
Step-up voltage converter with medium power from 12V until 24V (wide range) to 24V car line.▪ IN: 12V ... 24V / OUT: 24V▪ Connection: 5-pol plug▪ 5A Permanent positive\n\n \n \n \n Weight: 0.22 kg\n \n
\n
Converts the input voltage of 12V until 24V (wide range) to 26V constant
Active reverse polarity protection, the fuse is not blown
Case and connector waterproof
Overload protection by electronic fuse
Very low quiescent current (self-consumption) of 0.7mA only, no creeping discharge of the battery
\n \n
\n Input\n voltage:\n 8 ... 30V DC\n \n \n Input current:\n 11A at 13,0V (18A at 8,0V) at output current 5A\n \n \n Output voltage:\n 26V DC +-5%\n \n \n Output current:\n 5A permanent, 8A peak\n \n \n Connection:\n Connector Tyco Super Seal 1.5, 5-pol / 3 allocated, water\n protected IP67K\n \n \n Cable length:\n app. 100mm\n \n \n Current without load:\n 0.7mA at 12V\n \n \n Efficiency:\n app. 93% at 5A\n \n \n Temperature range:\n -40 ... +75°C, derating T>45°C\n \n \n Electrical protection:\n overcurrent, overtemperature, input transients, polarity\n \n \n Mechanical protection:\n entirely sealed\n \n \n Dimensions:\n 70 x 65 x 25mm without cable outlet\n \n \n Mass:\n app. 220g\n \n
High-end voltage converter of a higher power for 12V consumers at 24V car line.▪ IN: 24V / OUT: 12V▪ Connection: 5-pol plug▪ 16A\n \n\n \n \n\n \n \n \n Weight: 0.71 kg\n \n
\n
provides permanent plus (term.30) or ignition plus (term.15)
concept of high development standard: - real voltage division, discharge protection of 12V device is effective - significant low self current consumption of 0,7mA - very high efficiency of about 92%
overload capacity up to 24A for about 5 min.
small dimensions
high-quality high-power-plug, waterproof, the counterpart is included
5kW-peak-protection-diode to prevent overvoltage coming from the car line
\n \n \n \n \n\n \n \n
\n \n
\n Input\n voltage:\n 16 ... 30V DC\n \n \n Output voltage:\n 8 ... 15V DC input voltage gets halved\n \n \n Output current:\n 16A permanent, 24A for about 5 min.\n \n \n Connection:\n 3 contacts in a 5-pole plug "Delphi Metri-Pack Series 150\n Sealed" IP67K\n \n \n Cable length:\n _\n \n \n Current without load:\n 0,7mA at 24V\n \n \n Efficiency:\n app. 92%\n \n \n Temperature range:\n -40 ... +75°C, derating T>45°C\n \n \n Electrical protection:\n overcurrent, overtemperature, input transients\n \n \n Mechanical protection:\n entirely sealed\n \n \n Dimensions:\n 200 x 70 x 25mm without cable outlet\n \n \n Mass:\n app. 710g\n \n
About Continuous - CO.) SW60 Solenoids
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods. The SW60 features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SW60 has M6 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be on the side or base of the contactor.
High-end voltage converter of a higher power for 12V consumers at a 24V
car line. For the simultaneous supply of permanent plus line and
ignition plus line.▪ IN: 24V / OUT: 12V▪ Anschluss: 5Pol Stecker▪ 16A Permanent positive and ignition positive
Weight: 0.71 kg
provides permanent plus (term. 30) and ignition plus (term. 15) up to the maximum load
concept of high development standard: - real voltage division, discharge protection of 12V device is effective - significant low self current consumption of 0,7mA - very high efficiency of about 92%
overload capacity up to 24A for about 5 min.
small dimensions
high-quality high-power-plug, waterproof, the counterpart is included
5kW-peak-protection-diode to prevent overvoltage coming from the car line
Input
voltage:
16 ... 30V DC
Output voltage:
8 ... 15V DC input voltage gets halved
Output current:
16A permanent, 24A for about 5 min.
Connection:
5-pole plug "Delphi Metri-Pack Series 150 Sealed"
IP67K
Cable length:
ca. 70mm
Current without load:
0,7mA at 24V
Efficiency:
app. 92%
Temperature range:
-40 ... +75°C, derating T>45°C
Electrical protection:
overcurrent, overtemperature, input transients
Mechanical protection:
entirely sealed
Dimensions:
200 x 70 x 25mm without calbe outlet
Mass:
app. 710g
Technical principle:
ignition plus (term. 15) switches 2nd outlet
High-end voltage converter of a higher power for 12V consumers at a 24V car line.▪ IN: 24V / OUT: 12V▪ Connection: 3-pol plug▪ 26A
Weight: 0.93 kg
concept of high development standard: - real voltage division, discharge protection of 12V device is effective - significant low self current consumption of 0,7mA - very high efficiency of about 94%
overload capacity up to 35A for about 5 min.
small dimensions
high-power-plug of high quality
5kW-peak-safety-diode to prevent overvoltage from car line
Input
voltage:
16 ... 30V DC
Output voltage:
8 ... 15V DC input voltage gets halved
Output current:
26A permanent, 35A for about 5 min.
Connection:
3-pole plug "Anderson Powerpole Modular"
Cable length:
_
Current without load:
0,7mA at 24V
Efficiency:
app. 92%
Temperature range:
-40 ... +75°C, derating T>45°C
Electrical protection:
overcurrent, overtemperature, input transients
Mechanical protection:
entirely sealed
Dimensions:
200 x 70 x 40mm without cable outlet
Mass:
app. 930g
High-end voltage converter with medium power for 12V devices at 24V car line.▪ IN: 24V / OUT: 12V▪ Connection: cable with open ends▪ 10A
Weight: 0.385 kg
provides permanent plus (term. 30) or ignition plus (term. 15) up to the maximum load
concept of high development standard: - real voltage division, discharge protection of 12V device is effective -significant low self current consumption of 0,7 mA - very high efficiency of about 94%
overload capacity up to 15A for about 5 min.
small dimensions
connected with 3 pin sheathed cable
5kW-peak-safety-diode to prevent overvoltage from car line
Input
voltage:
16 ... 30V DC
Output voltage:
8 ... 15V DC input voltage gets halved
Output current:
10A permanent, 15A for about 5 min.
Connection:
cable with open ends
Cable length:
about 1000mm 3x1,5mm²
Current without load:
0,7mA at 24V
Efficiency:
app. 94%
Temperature range:
-40 ... +75°C, derating T>45°C
Electrical protection:
overcurrent, overtemperature, input transients
Mechanical protection:
entirely sealed (IP69K)
Dimensions:
120 x 70 x 25mm
Mass:
app. 385g
High-end voltage converter of a higher power for 12V consumers at a 24V car line.
▪ IN: 24V / OUT: 12V▪ Connection: 5-pol plug▪ 26A Permanent positive and ignition positive
Weight: 0.96 kg
provides permanent plus (term.30) or ignition plus (term.15)
concept of high development standard: - real voltage division, discharge protection of 12V device is effective - significant low self current consumption of 0,7mA - very high efficiency of about 92%
overload capacity up to 24A for about 5 min.
small dimensions
high-quality high-power-plug, waterproof, the counterpart is included
5kW-peak-protection-diode to prevent overvoltage coming from the car line
Input
voltage:
16 ... 30V DC
Output voltage:
8 ... 15V DC input voltage gets halved
Output current:
26A permanent, 35A for about 5 min.
Connection:
5-pole plug "Anderson Powerpole Modular"
Cable length:
app. 170mm
Current without load:
0,7mA at 24V
Efficiency:
app. 92%
Temperature range:
-40 ... +75°C, derating T>45°C
Electrical protection:
overcurrent, overtemperature, input transients
Mechanical protection:
entirely sealed
Dimensions:
200 x 70 x 40mm without cable outlet
Mass:
app. 960g
Technical principle:
ignition plus (term. 15) switches 2nd outlet
