Waterproof Champ 24V 20A Charger, with IP67
A Compact 24V/20A Battery Charger for All Battery Types with IP67
Champ is a compact and waterproof battery charger for all kinds of batteries. The ruggedized design with electronics completely moulded will withstand very high vibrations and a harsh environment. The charger is delivered preprogrammed and ready to use - just plug and play.
Output Voltage: 24 V
Output Current: 20 A
Number of Phases: 1
Rated Voltage Range: 190-254 V
Shipping Weight: 1.7 kg
Ingress Protection: IP67
Safe to Use
The Champ battery charger operates fully automatic.
Leaving the charger connected for long periods, the charger turns into maintenance mode to maintain the battery safely.
If connected with wrong polarity, the charger indicates a red light and does not start.
Charging program for all types of Lead-Acid batteries and Lithium-ion batteries.
The ruggedized design and compact volume, along with very high efficiency, make the Champ perfect for a multitude of tough tasks. It is equally suited to charge batteries for cyclical installations as it is to perform maintenance charging of starter batteries. The Champ charger handles difficult working environments, such as being mounted on the frameworks of a truck or under the bonnet in a vehicle as an "on-board" charger.
Other Champ Models
All models can be equipped with a control voltage for use as an immobilizer signal, to prevent starting of a vehicle before unplugging the mains cable (start interrupt function).
The Champ battery charger is a versatile and robust device suitable for various battery types, offering features like automatic operation, maintenance mode, and safety indicators. Its rugged design ensures durability in harsh environments.
Compact 24V/12A battery charger for all battery types with IP67
Champ is a compact and waterproof battery charger for all kinds of batteries. The ruggidized design with electronics completely moulded will withstand very high vibrations and a harsh environment. The charger is delivered preprogrammed ready to use -just plug n’ play.
11 Great Reasons to go with CHAMP Charger
• Plug & play• Polarity protection• No sparks• Short-circuit protection• Temp. compensated• Waterproof, IP67• Easy to install• Robust design• User friendly• Current limited• High efficiency >90%
Champ 24V 12A 230V STD
Output Voltage: 24 V
Output Current: 12 A
Number of phases: 1
Rated Voltage range: 190-254 V
Shipping Weight: 1.7 kg
Ingress protection: IP67
SU60-2025 — Albright 100A 48V CO, 1-Pole 1-Throw Miniature Contactor
A compact, high-reliability DC contactor from Albright’s SU series. Designed for continuous operation (CO) with a 48 V DC coil and a single-pole, single-throw contact set rated to 100 A.
100 A continuous current capability
48 V DC coil for direct integration into 48 V systems
1-pole, 1-throw (SPST) main contacts
Compact “miniature” footprint for tight installations
Designed for continuous duty (CO)
Trusted Albright build quality for traction, battery, and DC power control
Model
SU60-2025
Series
Albright SU Miniature Contactor
Main Contacts
1-Pole, 1-Throw (SPST)
Nominal Coil Voltage
48 V DC
Duty
CO — Continuous Operation
Continuous Current Rating
100 A
Typical Applications
Battery-powered vehicles and traction systems
DC power distribution and isolation
Industrial equipment, AGVs, material handling
Renewable/storage (inverters, chargers, DC links)
What’s Included
1 × Albright SU60-2025 contactor
Note: Always verify suitability against your system’s electrical requirements and protection design. Specifications may vary by configuration.
The Orion-Tr Smart DC-DC charger is a professional-grade device designed with an adaptive 3-stage charging process and integrated wireless Bluetooth connectivity.
It is ideal for use in dual-battery systems in vehicles and boats, where an (intelligent) alternator and starter battery are used to charge a service battery. The charger can be monitored and programmed via Bluetooth, and it also supports remote operation through a wireless on/off switch. Additionally, it features an engine running detection mechanism, ensuring optimal charging performance based on vehicle operation.
The Orion-Tr Smart charger is compatible with both 12V and 24V systems and is suitable for charging both lead-acid and lithium batteries. Multiple models are available, with power outputs of up to 400W. For even greater output, an unlimited number of units can be connected in parallel, making it easy to scale the system according to your power needs.
Designed for use in high-temperature environments, the Orion-Tr Smart charger can operate in temperatures up to 55°C, delivering full output power up to 40°C. This robust and versatile charger ensures reliable performance in even the most demanding conditions, making it an excellent choice for a wide range of applications.
Product overviewONE Light LED Driver 89100VND.100W 24V DC Triac &1-10V dimmable constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89100VND
Type: LED Driver
Category: 22 Drivers
Family: The 24V DC Open Range Dimmable Constant voltage
Material: Metal
Length: 230mm
Width: 50mm
Height: 30mm
Warranty: 3 Years
Downloads & links
Datasheet
Manual
Manufacturer page
Albright SW560A-38M 24V Magnetically Latched Contactor (INT.)
Albright International SW560A-38M is a 24 Volt single-pole, single-throw (SPST)
magnetically latched solenoid contactor, intermittent rated, supplied with auxiliary microswitch.
The SW560A is designed for telecommunications and power distribution applications
where an uninterrupted current load is switched. These contactors are primarily
intended for Direct Current (DC) loads but may also be used with Alternating Current (AC).
Key Features
24V coil voltage
Single-pole, single-throw (SPST)
Magnetically latched design
Intermittent duty (INT.)
Auxiliary microswitch fitted
Double-breaking main contacts
Silver-alloy contact tips – weld-resistant and high conductivity
Silver-plated main contacts (standard)
Special operating knob and extension fitted
Yellow warning label fitted
About Intermittent (INT.) SW560A Solenoids
Intermittent contactors are typically used for hydraulic functions on vehicles.
They make and break faster than continuous duty solenoids and are not recommended
for prolonged contact periods.
Magnetic Latching Function
The contact position is secured using a permanent magnet within the assembly.
The coil requires a pulse to close the contacts and a reverse-polarity pulse
to open them. Once operated, the contactor remains in its last energised state
without requiring continuous power.
Please note: magnetically latched contactors are not failsafe devices.
Mounting Information
The SW560A is a compact contactor that can be busbar-mounted vertically or horizontally.
If mounted vertically, the coil should be positioned at the bottom.
Auxiliary Microswitch
This version includes an auxiliary microswitch mounted on the top cover.
The auxiliary contact connection is triggered by coil energising.
Uninterrupted Current Applications
Suitable for applications with no or infrequent load switching requirements,
helping to maintain lower contact resistance over time.
Associated Parts (Recommended)
2155-165 Vertical mounting bracket (2 pcs recommended)
2065-167A Horizontal mounting bracket kit (1 pc recommended)
Technical Specifications
Device Type: NO – SP – ST Latching
Voltage: 24V D.C.
Coil Type: Intermittent
Thermal Current Rating: 600A
Application: Uninterrupted
Guideline Weight: 1.1 kg
Operating Ambient Temperature: -40°C to +60°C
Coil Data
Coil Resistance: 17 Ω
Pull-In Voltage: 17.0V (Maximum)
Drop-Out Voltage: 17.0V (Maximum)
Coil Power Dissipation: 33.88 W
Typical Pull-In Time: 30 ms
Electrical Performance
Voltage Drop per Pole (New Contacts at 600A): < 50 mV
Intermittent Current Rating
30% Duty: 1095A
40% Duty: 950A
50% Duty: 850A
60% Duty: 775A
70% Duty: 715A
Albright HV500AF-38 – Hermetically Sealed Electromechanical High-Voltage DC ContactorThe Albright HV500AF-38 is an electromechanical, single-pole normally-open (SPST-NO) high-voltage DC contactor in the HV500 series. It uses physical main power contacts to connect and disconnect DC circuits; it is not a solid-state relay. This configuration uses a 48V DC control coil with PWM coil economiser. The stated 48V DC is the control-coil voltage, not the main circuit voltage.Features
Electromechanical DC switching with normally-open main contacts
Hermetically sealed HV500 contactor construction
HV500 series validated for applications up to 1000V DC, subject to application-specific switching ratings
Thermal current rating up to 500A with appropriately sized conductors and installation conditions; switching ratings must be checked separately
Non-polarity-sensitive main contacts
PWM coil economiser
Typical applicationsDesigned for DC power switching in electric vehicle battery systems, charging equipment, renewable-energy systems, energy storage and industrial DC equipment, subject to electrical design and application verification.Selection note: Verify load voltage, continuous and breaking current, coil supply, pre-charge requirements and control options against the exact Albright catalogue and application requirements. PWM electronics are used for the coil circuit, not for solid-state switching of the main current. The HV500 contactor is not a substitute for appropriately rated external circuit protection.Technical reference: Albright HV500 manufacturer specifications.
Product overviewONE Light LED Driver 89100VL.100W 24V DC constant voltage driver slim range ideal to install inside the profile, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89100VL
Type: LED Driver
Category: 22 Drivers
Family: The 24V DC Slim Range Constant voltage
Material: Plastic
Length: 321mm
Width: 30mm
Height: 19mm
Warranty: 5 Years
Downloads & links
Datasheet
Manufacturer page
