SW80-1 Albright Intermittent 24V Single Pole Single Throw Contactor
The SW80-1, an Albright SW80 -series contactor has been developed for direct current loads, including motors as used in a variety of applications including electric vehicles, materials handling equipment, winches, Hydraulic Power Packs, Engine Starting, Standby Power, Lighting applications, Telecommunications, and D.C. System Electrics.
Genuine SW80-1005L Albright 24V Single Pole Single Throw Contactor with Suuret Kärjet installed. The SW80-1005L, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles li
Genuine SW80-105 Albright 24V Single Pole Single Throw Contactor. The SW80-105, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks as well a
Albright SW80-116 24V DC CO (125A)
The SW80-116 Albright 125A Single Acting Solenoid Contactor 24V CO is an integral component designed for efficient and reliable power management in various applications, especially where robust and durable electrical switching is crucial. As part of Albright's SW80 series, this model is tailored for single-acting operations, but it operates at a higher voltage and slightly lower current capacity compared to other models within the series. This specificity makes it well-suited for a distinct set of requirements, particularly in 24V systems.
Key Features:
Voltage Rating: The SW80-116 is specifically designed for 24V systems, aligning it with applications that operate within this voltage range, such as certain electric vehicles, industrial equipment, and backup power systems.
Current Capacity: It is rated for 125A continuous current, making it capable of handling significant power loads while ensuring reliable operation in critical situations.
Single Acting (CO) Configuration: The term "CO" stands for "Change Over"; however, in the context of single-acting solenoids like the SW80-116, it typically refers to a device that has one active position when power is applied and returns to its default state when power is removed, facilitated by an internal spring mechanism.
Robustness: The device is built to endure harsh conditions, including high-vibration environments and temperature variations, without compromising performance.
Compact and Versatile: Its compact size combined with high switching capacity makes it versatile for a wide range of applications, from safety cut-offs to power distribution management.
Applications:
Given its specifications, the SW80-116 finds its use in several critical areas:
Industrial Automation: For controlling motors, pumps, and other heavy machinery in manufacturing and processing plants, where 24V control systems are prevalent.
Electric Vehicles (EVs): Suitable for specific types of EVs that utilize a 24V power system, managing the main power supply from the battery to the motor controller efficiently.
Backup Power Systems: In uninterruptible power supply (UPS) systems or emergency power systems where reliable switching between power sources is necessary.
Marine and Offshore: Its robust design ensures reliable operation in marine applications, controlling electrical systems on boats and offshore platforms.
Advantages:
Dependability: Albright's reputation for quality ensures that the SW80-116 is a reliable component for critical switching operations under various conditions.
Installation Ease: The design allows for straightforward integration into existing systems, facilitating quick setup and minimal downtime.
Safety Focused: Ensures a secure electrical connection, minimizing the risk of accidental disconnections or failures, which is paramount in preventing equipment damage or safety hazards.
Conclusion:
The SW80-116 Albright 125A Single Acting Solenoid Contactor 24V CO is a specialized device that serves as a cornerstone in applications requiring reliable, high-capacity electrical switching in 24V systems. Its robustness, versatility, and safety features make it an ideal choice for a broad spectrum of applications, including industrial automation, electric vehicles, backup power systems, and marine applications. By integrating the SW80-116 into their systems, professionals can ensure efficient and reliable operation, meeting the demanding requirements of modern electrical control and power management tasks.
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via the integral bracket formed into the coil housing case. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.
Bracket fits round surfaces
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.The SW80P features an enclosed top cover and offers environmental protection to IP66. The SW80P has M8 stud main terminals and 6.3mm spade coil connections. Mounted using supplied brackets, mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.
Albright SW80-2017T 12V CO = Continuous
SW80-2017T Albright 12V Single Pole Single Throw Contactor. The SW80-2017T9, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks.
SW80-2017T has enclosed top cover (moving contacts are not visible, prevents some dust and dirt getting on the contact surfaces) + side panel for fuse
Albright SW80-2019 12V Intermittent
Genuine SW80-2019 Albright 12V Single Pole Single Throw Contactor. The SW80-2019, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks.
SW80-2019 has enclosed top cover (moving contacts are not visible, prevents some dust and dirt getting on the contact surfaces)
Genuine SW80-278 ALBRIGHT 24V 100A INT DC
The SW80-278, an Albright SW80 -series contactor has been developed for direct current loads, including motors used on different kinds of electric vehicles like industrial trucks.
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods. The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via the integral bracket formed into the coil housing case. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Genuine SW80-284 Albright 24V Single Pole Single Throw Contactor. The SW80-284, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks as well a
Albright SW80-3 12V Intermittent
Genuine SW80-3 Albright 12V Single Pole Single Throw Contactor. The SW80-3, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks as well as te
Genuine SW80-357P Albright Contactor. The SW80-357P, a Albright SW80 -series contactor with IP66 protection - P), has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks as well as
SW80-359 is equivalent to SW80-116 found here
Type : SW80-116 Coil Voltage (V) 24 CO DC Coil Resistance (Ohms) 52 Pull In Voltage (V) 16.0 Maximum Drop Out Voltage (V) 6.0 Maximum Coil Power Dissipation (W) 11.08 Additional Features ENCLOSED TOP COVER FITTED. INTEGRAL BRACKET MAG FRAME FITTED All figures above are stated at 20 degrees Celsius
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
Genuine SW80-374P Albright Contactor. The SW80-374P, a Albright SW80 -series contactor with IP66 protection - P), has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks as well as
Genuine SW80-375P Albright Contactor. The SW80-375P, a Albright SW80 -series contactor with IP66 protection - P), has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks as well as
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.The SW80P features an enclosed top cover and offers environmental protection to IP66. The SW80P has M8 stud main terminals and 6.3mm spade coil connections. Mounted using supplied brackets, mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Genuine SW80-390P Albright Contactor. The SW80-390P, a Albright SW80 -series contactor with IP66 protection - P), has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks as well as
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
SW80-6 Albright 24V Solenoid Switch. The SW80-6, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks.
Albright SW80-65 (ZAPI B2SW11 / B2SW12)Continuously Current Rate 125A
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
24V Forklift / Golf Cart Solenoid, SPST DC Contactor, Continuous use (main power)
The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via the integral bracket formed into the coil housing case. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
The Albright SW80-65 is a high-performance 24V DC contactor engineered for demanding applications such as electric vehicles, including forklifts and golf carts, as well as telecom and power distribution systems. With a continuous current rating of 125A, this Single Pole Single Throw (SPST) contactor is adept at handling resistive, capacitive, and inductive loads.
Key Features:
• Robust Main Contacts: Equipped with single-pole, double-breaking main contacts featuring silver alloy tips, the SW80-65 ensures exceptional conductivity and resistance to welding, enhancing durability and performance.
• Versatile Mounting Options: The contactor offers flexible mounting possibilities, including horizontal and vertical orientations. For vertical installations, it’s recommended that the M8 contact studs face upwards to optimize performance.
• Reliable Coil Connections: Designed with 6.3 mm (0.25” or 1/4”) spade terminals, the SW80-65 facilitates secure and straightforward coil connections.
Specifications:
• Model: SW80-65 (equivalent to ZAPI B2SW11 / B2SW12)
• Operating Voltage: 24V DC
• Continuous Current Rating: 125A
• Ambient Operating Temperature: -40°C to +60°C
• Mounting Brackets: Available separately in Top Hat and L shapes to suit various installation requirements.
• Weight: Approximately 0.35 kg
Applications:
The SW80-65 is specifically designed for direct current loads and is ideal for use in:
• Electric Vehicles: Perfect for industrial trucks, forklifts, and golf carts, ensuring reliable performance in traction and auxiliary systems.
• Telecom and Power Distribution: Suitable for switching operations in telecom infrastructure and power distribution networks, handling various load types effectively.
Choose the Albright SW80-65 for your DC switching needs and experience unparalleled performance and reliability in your applications.
Albright SW80-745 12V DC single-acting solenoid contactor with continuous duty and mounting bracket.
The SW80 series contactors are specifically designed for direct current applications, particularly for motors in small electric vehicles like light industrial trucks and powered mobility vehicles. These contactors feature double-breaking contacts with Silver-alloy tips, known for their weld resistance, durability, and excellent conductivity. They offer a cost-effective solution compared to sealed automotive solenoid switches, which do not allow for servicing or inspection of contact wear.
This unit includes the 2126-48A mounting bracket and is equipped with an auxiliary switch kit, part number 2070-124. The contactor features standard 6.3mm spade terminals on the upper coil and 4.8mm spade terminals on the lower. It comes with an enclosed top cover, a fitted diode, and includes special terminals and nuts.
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
![SW80-2017T Albright 100A/125A 12V CO 1-pole 1-throw Contactor [Haulotte] - OEM NORDIC - Quality Parts Distribution](http://mkcontrols.eu/cdn/shop/files/31FD81EF-1E7C-4392-BFFF-CC11DB7A00A2.png?v=1773422913&width=645)
![SW80-2017T Albright 100A/125A 12V CO 1-pole 1-throw Contactor [Haulotte] - OEM NORDIC - Quality Parts Distribution](//mkcontrols.eu/cdn/shop/files/31FD81EF-1E7C-4392-BFFF-CC11DB7A00A2.png?v=1773422913&width=645)
