About Continuous - CO.) SU80 Solenoids
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
The SU80P is an up-rated version of the SW80P designed for Interrupted and Uninterrupted applications. It is sealed to IP66 and has been designed for direct current loads in more arduous environments. It is suitable for switching Resistive, Capacitive and Inductive loads. Typical applications include, but are not limited to, electric motors, hydraulic power packs, winches and speed controllers.
The SU80P features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SU80P features an enclosed top cover and offers environmental protection to IP66. It has M8 stud main terminals and 6.3mm spade coil connections. Mounting can be vertical or horizontal, when vertical the M8 contact studs should point upwards.
About Intermittent - Int SU80-52117P
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.
The SU80P is an up-rated version of the SW80P designed for Interrupted and Uninterrupted applications. It is sealed to IP66 and has been designed for direct current loads in more arduous environments. It is suitable for switching Resistive, Capacitive and Inductive loads. Typical applications include, but are not limited to, electric motors, hydraulic power packs, winches and speed controllers.
The SU80P features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SU80P features an enclosed top cover and offers environmental protection to IP66. It has M8 stud main terminals and 6.3mm spade coil connections. Mounting can be vertical or horizontal, when vertical the M8 contact studs should point upwards.
About Intermittent SU80 Solenoids
SU80-5567 does have L-shaped bracket fitted
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.
The SU80 is an up-rated version of the SW80 Contactor designed for Interrupted and Uninterrupted loads. The SU80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via M4 tapped holes or by steel mounting brackets - supplied as separate items). Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Super duty contactor 1200A, 24V Continuous
The SW1000 is designed for use in telecommunication and power distribution applications where an uninterrupted load is switched. These contactors are primarily for use with Direct Current loads but can also be used with Alternating Currents.
Type: SW1000-174Coil Voltage (V) 24 CO DCCoil Resistance (Ohms) 19Pull In Voltage (V) 16.0 MaximumDrop Out Voltage (V) 6.0 MaximumCoil Power Dissipation (W) 30.32
Type : SW200-445Coil Voltage (V) 24 INT DCCoil Resistance (Ohms) 15Pull In Voltage (V) 14.5 MaximumDrop Out Voltage (V) 6.0 MaximumCoil Power Dissipation (W) 38.40Additional Features:2065-167A MOUNTING BRBACKET KIT FITTED.All figures above are stated at 20 degrees Celsius.The SW200-445 configuration would be packed in the same box as the SW200-281 (5 pcs per box).
https://www.sahkonumerot.fi/3713501
About Continuous - CO.) SW250 Solenoids Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods. The SW250 is a compact contactor which can be busbar mounted vertically or horizontally, if mounted vertically the coil should be at the bottom. Uninterrupted current - no or infrequent load switching requirements - maintains a lower contact resistance).
SW260-82 36/48 Volts DC, Single-acting Busbar Solenoid ContactorAlmost HO type INT coil.
The Albright SW260-82 36-48V Solenoid Contactor is a high-performance, single-pole, single-throw switch designed for uninterrupted current in telecommunications and power distribution. With silver-alloy contacts and double-breaking main contacts, it offers reliable and durable connectivity. Use with DC or AC supplies (with a rectifier board, sold separately) for maximum versatility.
The SW260-82 Albright Solenoid Contactor features silver plating on the main contacts for enhanced conductivity and durability. Its 2 x 2156-645 brackets provide easy installation. This contactor is ideal for use with PWM supply and has 4.8mm and 6.3mm coil tab terminals for versatility.
SW80-1919L Heavy Duty, Albright SPST contactor
Model SW80-1919L, with JPT connector, replacement of SW80-1683L / SW80-1684L / SW80-113L (BT part number 248310 / 208760)
Overview of SW80-1919L
The SW80-1919L contactor, featuring large contacts similar to those in the 200A contactor SW180B-751, is ideal for high initial load applications such as pump drivers or engine starters.
The SW80 with Junior Power Timer (JPT) Connector is designed for direct current loads, including motors used in electric vehicles like industrial trucks, as well as telecom and power distribution applications. It supports both interrupted and uninterrupted loads, making it suitable for switching resistive, capacitive, and inductive loads.
Current Types:
Interrupted Current: Involves frequent switching under load, increasing contact resistance.
Uninterrupted Current: Involves infrequent switching under load, maintaining lower contact resistance.
Features:
Single pole double breaking main contacts with silver alloy tips for excellent conductivity and resistance to wear and welding.
M8 stud main terminals and 6.3 mm spade coil connections.
Can be mounted horizontally or vertically, with adjustable options for downward orientation.
Specifications:
Model: SW80-1919L (compatible with model SW80-1684L)
Working Voltage: 24V
Application: Heavy duty with large contacts
Ambient Temperature Range: –40°C to +60°C
Mounting Brackets: Top hat and "L" shape
Connector: Pre-wired waterproof, 15 cm wire length
Net Weight: 0.40 kg
The Albright SW80-745 is a 12V DC single-acting continuous-duty solenoid contactor supplied with an extended mounting bracket and auxiliary switch assembly, making it ideal for industrial DC switching applications and electric vehicle systems.
The SW80 series is specifically engineered for direct current motor applications, especially in light industrial trucks, powered mobility vehicles, utility equipment, and other battery-powered systems. Unlike sealed automotive starter solenoids, the SW80 contactors are serviceable and allow inspection of contact wear, offering a more durable and cost-effective long-term solution.
Key features include:
Continuous duty 12V DC coil
Double-break main contacts for improved DC switching performance
Silver-alloy contact tips for excellent conductivity and high weld resistance
Auxiliary switch kit installed (Part No. 2070-124)
Removable auxiliary assembly secured with screws
Extended upper mounting bracket (2126-48A)
Enclosed top cover for additional protection
Integrated suppression diode fitted
Supplied with special terminals and fixing nuts
Connection details:
Upper coil terminals: standard 6.3mm spade terminals
Lower coil terminals: standard 4.8mm spade terminals
This contactor is commonly used in:
Electric utility vehicles
Material handling equipment
Hydraulic power packs
Winch systems
Battery disconnect systems
DC motor reversing and switching circuits
Its rugged construction and replaceable contact system make it particularly suitable for demanding industrial and mobile equipment environments where reliability and serviceability are important.
About the Intermittent SW88-1 Reversing Contactors Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods. The SW88 is a configuration of two SW84 type contactors on a common bracket for the motor reversing. The SW88 features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing, and have excellent conductivity. The SW88 main contact circuit, designed for motor reversing, is such that it has a built-in failsafe, so that if both coils are energized simultaneously the contact arrangement is open circuits. The SW88 has M8 stud main terminals and 6.3mm spade coil connections. Mounted using the supplied bracket, mounting of the solenoids can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
SW88-3 Albright
About the Intermittent SW88-3 Reversing Contactors
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.
The SW88 is a configuration of two SW84-type contactors on a common bracket for the motor reversing. The SW88 features single pole double-breaking main contacts with silver alloy tips, which are weld resistant, hardwearing, and have excellent conductivity.
The SW88 main contact circuit, designed for motor reversing, is such that it has a built-in failsafe, so that if both coils are energized simultaneously the contact arrangement is open circuits.
The SW88 has M8 stud main terminals and 6.3mm spade coil connections. Mounted using the supplied bracket, mounting of the solenoids can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
ALBRIGHT SW88-46 24V DC INT
About the Intermittent SW88-46 Reversing Contactors
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods. The SW88 is a configuration of two SW84 type contactors on a common bracket for the motor reversing. The SW88 features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing, and have excellent conductivity.
The SW88 main contact circuit, designed for XQmotor reversing, is such that it has a built-in failsafe, so that if both coils are energized simultaneously the contact arrangement is open circuits. The SW88 has M8 stud main terminals and 6.3mm spade coil connections. Mounted using the supplied bracket, mounting of the solenoids can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
