SW80-359 is equivalent to SW80-116 found here
Type : SW80-116 Coil Voltage (V) 24 CO DC Coil Resistance (Ohms) 52 Pull In Voltage (V) 16.0 Maximum Drop Out Voltage (V) 6.0 Maximum Coil Power Dissipation (W) 11.08 Additional Features ENCLOSED TOP COVER FITTED. INTEGRAL BRACKET MAG FRAME FITTED All figures above are stated at 20 degrees Celsius
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
Genuine SW80-374P Albright Contactor. The SW80-374P, a Albright SW80 -series contactor with IP66 protection - P), has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks as well as
Genuine SW80-375P Albright Contactor. The SW80-375P, a Albright SW80 -series contactor with IP66 protection - P), has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks as well as
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.The SW80P features an enclosed top cover and offers environmental protection to IP66. The SW80P has M8 stud main terminals and 6.3mm spade coil connections. Mounted using supplied brackets, mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Genuine SW80-390P Albright Contactor. The SW80-390P, a Albright SW80 -series contactor with IP66 protection - P), has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks as well as
SW80-6 Albright 24V Solenoid Switch. The SW80-6, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks.
Albright SW80-65 (ZAPI B2SW11 / B2SW12)Continuously Current Rate 125A
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
24V Forklift / Golf Cart Solenoid, SPST DC Contactor, Continuous use (main power)
The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via the integral bracket formed into the coil housing case. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
The Albright SW80-65 is a high-performance 24V DC contactor engineered for demanding applications such as electric vehicles, including forklifts and golf carts, as well as telecom and power distribution systems. With a continuous current rating of 125A, this Single Pole Single Throw (SPST) contactor is adept at handling resistive, capacitive, and inductive loads.
Key Features:
• Robust Main Contacts: Equipped with single-pole, double-breaking main contacts featuring silver alloy tips, the SW80-65 ensures exceptional conductivity and resistance to welding, enhancing durability and performance.
• Versatile Mounting Options: The contactor offers flexible mounting possibilities, including horizontal and vertical orientations. For vertical installations, it’s recommended that the M8 contact studs face upwards to optimize performance.
• Reliable Coil Connections: Designed with 6.3 mm (0.25” or 1/4”) spade terminals, the SW80-65 facilitates secure and straightforward coil connections.
Specifications:
• Model: SW80-65 (equivalent to ZAPI B2SW11 / B2SW12)
• Operating Voltage: 24V DC
• Continuous Current Rating: 125A
• Ambient Operating Temperature: -40°C to +60°C
• Mounting Brackets: Available separately in Top Hat and L shapes to suit various installation requirements.
• Weight: Approximately 0.35 kg
Applications:
The SW80-65 is specifically designed for direct current loads and is ideal for use in:
• Electric Vehicles: Perfect for industrial trucks, forklifts, and golf carts, ensuring reliable performance in traction and auxiliary systems.
• Telecom and Power Distribution: Suitable for switching operations in telecom infrastructure and power distribution networks, handling various load types effectively.
Choose the Albright SW80-65 for your DC switching needs and experience unparalleled performance and reliability in your applications.
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
The SW80P features an enclosed top cover and offers environmental protection to IP66. The SW80P has M8 stud main terminals and 6.3mm spade coil connections. Mounted using supplied brackets, mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Albright SW80-753PE
Also known and sold as SOLENOID 24V 80AMP HALDEX SW80-753PE
This is the original Albright made, genuine SW80-753PE Albright 24V INT Single Pole Single Throw Contactor. The SW80-753PE, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks a
The SW80P features an enclosed top cover and offers environmental protection to IP66. The SW80P has M8 stud main terminals and 6.3mm spade coil connections. Mounted using supplied brackets, mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
SW80-912PL Solenoid Contactor / Starter Contactor
Genuine SW80-912PL Albright 24V INT Single Pole Single Throw Contactor. The SW80-912PL, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks.
Also with HF3324-LT on hydraulic pumps
Genuine SW80A-182 Albright 24V Single Pole Single Throw Contactor. a Albright SW80 -series contactor with Auxilary contacts - A) fitted, has been developed for direct current loads, including motors as used on different kind of electric vehicles like indus
SW80AB-19 Albright
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods. The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via the integral bracket formed into the coil housing case. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Genuine SW80B-15 Albright 72V 100A CO DC - COntactor. The SW80B-15, a Albright SW80 -series contactor with magnetic blowouts - B) fitted, has been developed for direct current loads, including motors as used on different kind of electric vehicles like indust
Albright SW80B-1648 Single-Acting Solenoid Contactor
Specifications:
• Voltage: 125V continuous • Mounting: Integral bracket fitted • Winding: Vacuum-impregnated • Insulation: Coil insulators fitted • Connections: 24-inch long flying leads coil connection
Features:
• Design: The SW80 series is designed for direct current loads, particularly for motors used in small electric vehicles like light industrial trucks and powered invalid cars. • Contacts: Equipped with double-breaking contacts with Silver-alloy contact tips, which are weld-resistant, hardwearing, and offer excellent conductivity. • Cost: Economically priced, they compare favorably with sealed automotive-style solenoid switches that cannot be serviced or inspected for contact wear. • Auxiliary Switch Kit: Part number 2070-124.
Dimensions:
• Height: 94mm (including terminals and coil base cap) • Coil Width: 41mm • Cap Width: 50.5mm • Cap Depth: 39mm
Magnetic Blowouts:
• These contactors have a double break configuration with magnetic blowouts (denoted by the ‘B’ suffix in the SW80 range) across both contact gaps. This allows for quick rupture of high currents, minimizing arcing time. Note that the blowouts make the contacts polarity sensitive, and the positive markings on the top cover must be observed.
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via the integral bracket formed into the coil housing case. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Specifications
Device Type
NO - SP - ST
Voltage
125V D.C.
Coil Type
Continuous
Amps
100 Amps
Coil Resistance (Ohms)
1500
Pull-In Voltage (V)
75.0 Max.
Drop Out Voltage (V)
32.0 Max.
Coil Power Dissipation (W)
10.42
Typical Pull-In Time
20ms
Typical Voltage Drop Per PoleAcross New Contacts At 100A
40mV
Operating Ambient Temperature
-40 to +60℃
Weight
430g
Application
Interrupted
Uninterrupted
Thermal Current Rating
100A
125A
Intermittent Current Rating:
30% Duty
185A
230A
40% Duty
160A
200A
50% Duty
140A
175A
60% Duty
130A
160A
70% Duty
120A
150A
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.
The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via the integral bracket formed into the coil housing case.
Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Genuine SW80B-6 Albright 24V Solenoid Switch. The SW80B-6, a Albright SW80 -series contactor with magnetic blowouts - B) fitted, has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial tr
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.
The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via the integral bracket formed into the coil housing case. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Genuine SW82-122P ALBRIGHT 28V 100A CO DC - COntactor. The SW82-122P, a Albright SW82 type of contactor has been designed for direct current loads, including motors as used on electric vehicles like industrial fork lift trucks and pallet movers. Developed f
About Intermittent - Intermittent SW82-3 Solenoid
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods. The contactors are compact in size and are fully serviceable with a full range of spare parts available. The SW82 has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or by purchasing mounting brackets. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
About Continuous - CO.) SW82-4 Solenoids Continuous contactors by design are predominantly for drive functions on vehicles, they switch slower than intermittent solenoids and are recommended for prolonged contact periods. The contactors are compact in size and are fully serviceable with a full range of spare parts available. The SW82 has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or by purchasing mounting brackets. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
