JAQUET T500 DualTach - 2 Channel Measurement Monitoring Device
Few pieces are available. 384Z-05600 (T501.50)
T501.50 AC 90...270VAC, 2 Channel Measurement Device:
Features:
High accuracy speed measurement: 0.002% for limits and 0.25% on the analogue output.
2 frequency + 2 binary inputs 2 analogue, 4 relay and 2 Open Collector outputs
Sensor monitoring for all sensor technologies
Ethernet interface - configuration via Windows software
Extensive parameter and limit setting possibilities
Programmable logical, diagnostic and measurement functions
Supply 90..270 VAC Plug in terminals
Successor product is SpeedSys T20
Jaquet 384Z-05601 (T501.10)
The Jaquet T501 (previously also T500) is a two-channel tachometer for demanding machine monitoring applications. The unit has a measuring range of 0.025 Hz to 50 kHz and gives a 4-20 mA output signal that can be configured via the supplied Windows software.
Input and output signals
2 frequency inputs (speed signals) and 2 binary inputs.
2 analog outputs, 2 open collector outputs and 4 relays.
Features
The T501 has programmable logic, diagnostic functions and measurement functions, a fast response time of 8 ms and contains 4 parameter sets with 6 system limits each for virtually unlimited applications.
SpeedSys® T10 to replace Jaquet T401
MPN: SSYT10-000-XXX
SpeedSys® is a tachometer (Speed transmitter, monitor & switch)
The SpeedSys T10 is a single-channel speed monitor and switch that delivers speed-monitoring functions to rotating equipment. It converts the signals from speed sensors to processed outputs. Its small technical footprint allows for a low-impact installation, to enable speed monitoring to a wide range of applications. The T10 is part of the SpeedSys tachometer series with the Speedsys T20 and the SpeedSys T30.
Functions: Speed, overspeed, underspeedInputs accepted: Hall effect sensor, electromagnetic sensorOutputs: 1x 4-20 mA analog output, 1x open collector frequency output
Relay: 1x DPST relay, 1x SPST relayInterface: Modbus TCPHumidity protection: Conformal coatingHousing: DIN rail with push-in connectorsCertifications: CE, UKCA, DNV
The SpeedSys T10 is used as a monitoring and switching device for speed conditions on rotating machinery. Typical applications of T10 are:
Aeroderivatives
Micro turbines
Wind turbines
Gas- and steam turbines
Hydro turbines (Kaplan, Francis, Pelton)
Compressors
Expanders
Marine applications
Elevators
General automation
If you were looking after Jaquet (TE) T401 has been made obsolete = discontinued. You can extend the life of the current installations simply swapping a T10 on place!
The SpeedSys T10 is a functional replacement for the T401 series.
Jaquet T401 replacement by SpeedSys T10 by IstecThe SpeedSys T10 is developed to replace the Jaquet transmitter series declared obsolete by manufacturer TE connectivity (Jaquet).
SpeedSys T10 can be used to replace the following Jaquet parts: T401 series, T402 series, FTW113 DC 24I, FTW113 DC 24U, FTW123 DC 24, FTV 1398 Line driver.
SpeedSys T10 and consult the datasheet for all deviations and to assess suitability for your application. If you have any questions about the conversion, please consult your Istec representative.
Disclaimer
The SpeedSys T10 has additional features, but some functionalities deviate from the Jaquet T401.
Additional features:
Remote reset
TCP Modbus
Marine class certification
Dual relay output
Deviations
Not suitable for 2-wire Hall sensors
Not suitable for Namur sensors
No voltage (0-10 V) output option
Key advantages of the new SpeedSys T10 tachometer products:
Easy replacement: Our new tachometers are designed to be a direct replacement for the Jaquet T-series. Minimal modifications are required during installation, saving time and resources.
Enhanced functionality: Our new tachometer line features several improvements to boost operational efficiency, including enhanced relay features and Modbus TCP. Please refer to the datasheet for more information.
SpeedSys 200 - Transmitter & Overspeed Protection
The SpeedSys 200 stands as a pinnacle of innovation in the domain of rotating machinery protection, embodying a compact and efficient solution for overspeed detection. This system distinguishes itself through a design philosophy that prioritizes safety from the onset, diverging from traditional methods reliant on long-term proven usage. By incorporating a SIL-rated mechanism, it guarantees a high level of reliability and safety with minimal spatial requirements.
SIL 2 certified protection system
Designed for Versatility – with 1oo1, 1oo2, 2oo2 and 2oo3 configurations
Suitable for all common type sensors:- Hall-effect sensors- Electromagnetic sensors- Proximity sensors
Super fast 8 ms system response time.
Atex / IECex certified for Zone 0 installation.
“SpeedSys 200 is a Game Changing Innovation for SIL rated overspeed protection“
Technical Specifications
Sensor Inputs: 3 separate sensor inputs for different types of sensors
Outputs: 2 Safety relays, 1 additional relay, 4-20 mA & digital frequency output
LED Status indicators
Measurement Accuracy: 0.1%
Power Supply: 24 V DC (with 2 redundant power supplies)
Mounting: DIN Rail mountable
Housing: Polyamide
Applications suitable to
The SpeedSys 200 Overspeed Protection System architecture is designed to suit a wide range of applications. Most common & typical applications include the following:
Gas Turbines
Wind Turbines
Small & Micro Turbines
Marine Applications
Compressors and pumps
Emphasizing a "Safe by Design" approach, the SpeedSys 200 eschews the conventional reliance on historical data, which often necessitates extensive periods to establish reliability and complicates the process of recertification following any modifications. This forward-thinking design strategy ensures that the system remains adaptable and easy to update or recertify, thereby providing a resilient safeguard against overspeed conditions without the constraints of past methodologies.
Up to date Overspeed Protection System
Engineered to serve a broad spectrum of machinery, the SpeedSys 200 is versatile enough to offer cost-effective and reliable overspeed protection for singular applications, while also supporting the construction of redundancy and voting structures for applications demanding higher reliability or availability. Its applicability spans an impressive array of equipment, including micro turbines, wind turbines, compressors and pumps, aeroderivative and conventional gas and steam turbines, and even marine machinery.This innovative approach to machinery safety, coupled with the system's adaptability and compact form factor, ensures that the SpeedSys 200 can deliver advanced protection across a diverse range of settings, thereby safeguarding critical machinery against the potentially catastrophic consequences of overspeed conditions.
The SpeedSys 200 emerges as a paragon of certified safety and adaptability, engineered to fulfill the stringent specifications of SIL 2 certification for reliable overspeed protection. This system distinguishes itself through its rapid response capabilities and a state-of-the-art self-monitoring framework, which extends the intervals between tests while providing ample safety outputs to ensure consistent operation under a variety of conditions.Emphasizing adaptability, the SpeedSys 200 is designed with a minimal technical footprint, allowing it to seamlessly integrate into both field enclosures and control room environments. Its compatibility with industry-standard inputs and outputs simplifies the process of integration and retrofitting, making it a versatile choice for a wide array of industrial settings.A notable innovation within the SpeedSys 200 is its implementation of isolated inputs. This feature effectively removes the necessity for external isolators or barriers, streamlining the installation process and diminishing the likelihood of failure modes. Additionally, it enhances the system's ability to monitor sensors, providing an added layer of reliability and safety to the overspeed protection mechanism.
SpeedSys 200 - Features
Certified Safety: The SpeedSys 200 is engineered to comply with SIL 2 certification standards for overspeed protection. It boasts exceptionally quick reaction times, advanced self-monitoring capabilities allowing for longer intervals between tests, and numerous safety outputs to ensure robust protection.
Designed for Versatility: With its compact technical footprint, the SpeedSys 200 is adaptable for both field enclosures and control room settings. It supports industry-standard inputs and outputs, facilitating straightforward integration and retrofitting across various industrial applications.
Isolated Inputs: The system features isolated inputs, negating the need for additional isolators or barriers in the installation process. This innovation not only reduces potential failure modes but also enhances sensor monitoring capabilities, contributing to the overall reliability and efficiency of the protection mechanism.
Replacing units:
FTFU 3024-E04 obsolete / SpeedSys 200 is an alternative
Discover the high-performance A5S Differential-Hall-Effect Speed Sensors, designed for precision and reliability. These contact-free, wear-free, and maintenance-free sensors are ideal for monitoring machine speed from 0 Hz to 25 kHz, ensuring accurate detection of various steel profiles. With a robust stainless steel housing resistant to pressures over 200 bars and customizable connection options, the A5S series is perfect for demanding industrial applications where high accuracy and durability are crucial. Explore a range of customizable options to find the perfect sensor for your specific needs.
Differential-Hall-Effect Speed Sensors Series A5S0DD0
The correct choice of sensor is always a prerequisite to achieving a successful solution. Our A5S speed sensors are based on the proven Differential-Hall-Effect principle. Their low end of 0 Hz allows monitoring the machine down to zero speed. In addition, they are contact-free, wear-free, and maintenance-free. Furthermore, they are unsusceptible versus external magnetic stray fields and machine vibration. These characteristics make the series of A5S sensors especially suited to all applications where high accuracy and reliability are at a premium. In contrast, other sensors like magnet-inductive or static Hall-sensors do not meet these demands.
The sensors virtually can detect any steel profile: fine or coarse, helical or straight gear wheels, nuts or pole wheels with small or large cams.
Depending on the application, the speed range spans an area from a stationary state up to 25 000 pulses per second (0 Hz…25 kHz).
Each sensor in the series is available in various lengths and diameters and comes with a choice of connections. However, functionally all sensors have the same characteristics. The stainless steel sensor housing is sealed at the front and pressure-resistant (> 200 bars). A flat shaft with a screw-in thread M12x1.
A5S0DD0
Sensor A5S0DD0 for detection of rotational speed
Contact-free, wear-free, maintenance-free
Unsusceptible versus external magnetic stray fields and machine vibration
Suitable for all applications where high levels of accuracy and reliability are at a premium
Frequency range 0 Hz...25 kHz
Single Channel, the output displays the rotational speed as a single-track frequency signal
TÜV certified for safety level SIL3 / IEC 61508:2010
TÜV certified for PL e; Cat. 3 / DIN EN ISO 13849-1:2016 + DIN EN ISO 13849-2:2012
TÜV certified for SILCL3 / IEC 62061:2015
