The Jaquet DSD 1810.01 PHW is a differential Hall-effect speed sensor, optimized for both static and dynamic applications. Encased in an M18x1 housing, it detects modules as small as 1.0. Equipped with a durable 0.825m integral cable, it offers phase-shifted quadrature signal outputs and operates reliably in temperatures ranging from -40°C to +125°C.
Features
M18x1 housing
Module 1.0 is the smallest structure which can be detected
Integral cable terminated with a connector (pig tail)
High temperature -40..+125°C (or higher)
Quadratur signal (2 phase shifted output signals)
0,825m cable
TE / Jaquet Speed Sensor – DSD 2210.01 STV (5 m)
MPN: 374Z-03750 · Series: DSD 2210.01 STV (5 m)
Type: Differential ferrostat Hall-effect sensor
The Jaquet DSD 2210.01 STV (5 m) is a high-reliability differential Hall-effect speed sensor designed for both static and dynamic detection of ferrous targets. It is particularly suited for applications where robust signal detection is required at zero and low speeds.
Key Features
M22×1 threaded housing – durable metal construction for secure installation.
Module 1.0 detection capability – able to detect the smallest tooth structure with a 1.0 module pitch.
Integral 5 m PVC cable – open wire ends for flexible connection to control systems.
Wide operating range – works from –25 °C to +85 °C.
Push-Pull output – standard built-in line amplifier ensures strong, noise-immune signal transmission.
Differential ferrostat technology – improved resistance to vibration, EMI, and air gap variation compared to single Hall sensors.
Applications
Rotational speed monitoring in industrial drives
Gear tooth sensing in heavy machinery
Low-speed shaft detection in rail, marine, and energy systems
Harsh-environment sensing where temperature stability and signal integrity are critical
The DSD 2210.01 STV delivers precise, reliable speed measurements across a wide speed range, making it a preferred choice for demanding industrial and transportation applications.
Downloads
Datasheet »
Jaquet speed sensor (MPN: 374Z-03877 / DSF 2210.00 SHV (5m) -Series)
The Jaquet Speed Sensor DSF 2210.00 SHV (5m) with MPN: 374Z-03877 is specifically engineered for precision in monitoring rotary speeds through its advanced Hall effect sensor technology. It boasts a robust design that can generate square wave signals with exceptional reliability down to very low frequencies, ensuring accurate speed detection even under challenging conditions. With a short-circuit-proof push-pull output stage, it guarantees operational safety and stability. This sensor is an ideal choice for applications requiring precise speed measurements, providing both durability and performance.
Datasheet: DSF 2210.00 SHV (5m) (mpn: 374Z-03877) datasheet here
You can find this sensor with Standard Ambient Temperature cable here.
Jaquet Speed Sensor DSF 2210.00 SHV (5m) with MPN: 374Z-03877 is a high-precision device tailored for generating square wave signals proportional to rotary speeds, featuring a magnetically biased Hall effect semiconductor for accurate detection ensuring pulse generation down to a frequency of 0.05 Hz regardless of the sensor axis's rotational orientation.
Here are detailed specifications and features of DSF 2210.00 SHV (5m):
Supply Voltage: 10 V to 30 V, safeguarded against transient overvoltages and reverse polarity, ensuring robust performance in fluctuating power conditions.
Current Consumption: Maximum of 16 mA (without load), optimizing energy use while maintaining functionality.
Signal Output: Square wave, push-pull outputs with a maximum current of ±20 mA. It includes both pull-up and pull-down resistors to ensure signal integrity under varying load conditions.
Frequency Range: 0.05 Hz to 20 kHz, enabling accurate pulse generation over a wide range of speeds, from very slow rotations to high-speed operations.
Electromagnetic Compatibility (EMC): Complies with Directive 2004/108/EC EN 61000-6-2 and 61000-6-4 standards, ensuring resistance to electrostatic discharge, radiated electromagnetic fields, and fast electrical transients.
Housing: Stainless steel 1.4305, front side hermetically sealed, resistant against splashing water, oil, carbon- or ferrous dust, and salt mist. The electronics are potted in chemical and age-resistant synthetic resin, with a maximum allowable pressure on the sensor head of 10 bar.
Pole Wheel Requirements: Optimized for toothed wheels made of magnetically permeable material (e.g., Steel 1.0036), with specific recommendations for involute gear, tooth width, side offset, and eccentricity to ensure optimal performance.
Air Gap: Specifies the air gap range between the pole wheel and sensor housing for different modules, ensuring reliable operation without physical contact.
Insulation: Housing and electronics are galvanically separated, with a protection class of IP68 (head) and IP67 (cable outlet), offering high resistance to vibration (5 g in the range of 5 to 2000 Hz) and shock (50 g for 20 ms half sine wave).
Temperature Range: Operating temperatures for version H are -40° to +125°C, and for version T, -25° to +85°C, accommodating a wide range of environmental conditions.
Reliability: An MTTF of 3’177’000 hours and a failure rate of 314.8 FIT at an operating temperature of 60°C, based on Siemens SN29500, indicating high reliability excluding mechanical failure modes.
This comprehensive suite of features makes the DSF 2210.00 SHV (5m) sensor an ideal choice for applications requiring precise and reliable speed measurement in challenging environmental conditions, including industrial, automotive, and marine applications.
Approved by Germanischer Lloyd, it operates with a supply voltage of 10 V to 30 V, protected against transient overvoltages and reverse polarity, and has a maximum current consumption of 16 mA without load. Its output is a square wave with push-pull outputs, capable of handling ±20 mA with specific low and high voltage conditions. The sensor is robust, with a stainless steel housing resistant to various environmental conditions and capable of operating within a frequency range of 0.05 Hz to 20 kHz. It also demonstrates high immunity to vibrations and shocks, suitable for challenging industrial environments.
Check all Jaquet Speed Sensors here
TE / Jaquet Speed Sensor FTG 1087.01AH L225
MPN: 374Z-04455
Ferrostat speed sensor with integrated signal amplifier
The TE / Jaquet FTG 1087.01AH L225 is a high-quality industrial speed sensor designed for precise and reliable rotational speed detection in demanding environments.
This Ferrostat sensor features an integrated signal amplifier, ensuring high sensitivity and stable signal output even in challenging operating conditions.
Manufacturer: TE / Jaquet
Model: FTG 1087.01AH L225
MPN: 374Z-04455
Sensor type: Ferrostat speed sensor
Integrated amplifier: Yes
Length: 225 mm
Weight: Approx. 500 g
Key features
Ferrostat sensing technology
Integrated signal amplifier for enhanced performance
High sensitivity and reliable signal detection
Robust construction for industrial environments
Typical applications
Rotational speed monitoring
Engines and turbines
Gearboxes and rotating machinery
Industrial automation systems
Power generation equipment
Original Jaquet product
This is a genuine Jaquet product, supplied brand new in original manufacturer packaging.
Documentation
Datasheets, dimensional drawings, 3D STEP files, declarations of conformity, and certificates are available upon request.
Jaquet DSD 1205.21 ATV (378Z-04760) Ferrostat Speed Sensor
The Jaquet Speed Sensor DSD 1205.21 ATV, with the model number 378Z-04760, is available for purchase. This sensor is a part of Jaquet's product line, known for its precision and quality in measuring speeds. The item is available for international shipping, typically within 1-3 business days for stock items. For more detailed information, including pricing and specific features of this sensor, please ask us for the latest datasheet & drawing of this sensor.
Key Features of DSD 1205.21 ATV (378Z-04760) :
High Performance: Engineered to deliver exceptional results.
Durable Construction: Built with high-quality materials for long-lasting use.
Innovative Design: Incorporates the latest technology for enhanced efficiency.
Cost-Effective: Offers great value for money with competitive pricing.
Jaquet DSF 1210.00 SHV Ex ATEX - Premium Industrial Hall Effect Speed Sensor
The Jaquet DSF 1210.00 SHV Ex ATEX (374Z-05176) is a premium intrinsically safe Hall-effect speed sensor certified for use in explosive atmospheres. Featuring an M12x1 housing with 5m Teflon cable, this sensor generates speed-proportional frequency signals from 0.05 Hz with dynamic behavior for both static and near-static applications. ATEX certified for flammable gas and dust environments, it combines compact design with robust performance for hazardous area monitoring.
Technical Specifications
Model: DSF 1210.00 SHV Ex ATEX (5m)
Part Number: 374Z-05176
Drawing Number: 110428F1
Housing: M12x1 thread, stainless steel X12CrNiS188 (material 1.4305)
Sensing Technology: Magnetically biased Hall device with trigger amplifier
Supply Voltage: 8-28 VDC (reverse polarity protected, max AC ripple 25 mVpp)
Current Consumption: Max 15 mA (without load)
Frequency Range: 0.05 Hz to 20 kHz (dynamic behavior with guaranteed pulse generation down to 0.05 Hz)
Maximum Tightening Torque: 12 Nm for M12x1
ATEX Certifications
Gas Atmospheres: II 2 G Ex ia IIC T6 Gb (Zone 1)
Dust Atmospheres: II 2 D Ex ia IIIC T155°C Db (Zone 21)
Standards Compliance: EN 60079-0:2012+A11:2013 and EN 60079-11:2012
Certificate: ZELM 03 ATEX 0124X (with supplements 1-4)
EMC Compliance: 2014/30/EU, IEC 61000-6-2
Notified Body: PRIMARA (ID 2572)
Operating Temperature
Gas Environments: -20°C to variable maximum (dependent on electrical power and temperature class - see datasheet TABLE 1)
Dust Environments: -20°C to +100°C
Temperature Class: T1 through T6 supported (varies with available electrical power)
Note: Maximum operating temperature depends on sensor housing size, available electrical power from intrinsically safe supply, and Ex temperature class requirements
Signal Output
Signal Type: Square wave from push-pull output stage
Signal Coupling: DC-coupled to supply (0V = reference voltage)
Maximum Load Current: 25 mA
Output Voltage HIGH: UHi > USupply - 4V (at Isource = 25 mA)
Output Voltage LOW: ULo < 2V (at Isink = 25 mA)
Protection: Short-circuit proof and reverse polarity protected
Note: Voltage drop from cable impedance and safety barrier resistance must be considered
Cable Specifications
Cable Type: Teflon cable (Art. No. 824L-35053)
Cable Length: 5 meters
Conductors: 4-pole, 4 x 0.24 mm² (AWG 24)
Shielding: Mesh screen, isolated from housing
Outer Diameter: Max 4.0 mm
Outer Jacket: White
Minimum Bend Radius: 60 mm
Weight: 32 g/m
Note: Brown wire is not used
Target Wheel Requirements
Material: Magnetically permeable material (e.g., Steel 1.0036)
Preferred Type: Involute gear wheel (module 0.5 minimum)
Minimum Tooth Width: 10 mm
Side Offset: < 0.2 mm
Eccentricity: < 0.2 mm
Air Gap Specifications
Module 1: 0.2 to 1.0 mm
Module 2: 0.2 to 2.5 mm
Module 3: 0.2 to 3.5 mm
Module 4 and larger: 0.2 to 4.5 mm
Note: Within specified air gap, output signal amplitude is not influenced by gap distance
Environmental Protection
Protection Class: IP68 (sensor head), IP67 (cable connection)
Housing Seal: Front side hermetically sealed
Potting: Electronic components fully potted in chemical and age-resistant ceramic compound
Chemical Resistance: Resistant to oil, grease, and harsh industrial conditions
Vibration Immunity: 5 gn in the range 5-2000 Hz
Shock Immunity: 20 g during 20 ms, half-sine wave
Electrical Isolation: Housing, cable screen, and electronics galvanically separated (500V/50Hz/1 min)
Key Features
ATEX Certified: Approved for Zone 1 gas and Zone 21 dust hazardous areas
Near-Zero Speed Detection: Guaranteed pulse generation down to 0.05 Hz for static applications
Dynamic Behavior: Suitable for variable speed applications
Compact M12x1 Design: Space-saving installation in tight locations
High-Quality Cable: Teflon insulation for chemical and temperature resistance
Intrinsically Safe: Type ia certification for maximum safety in explosive atmospheres
No Maintenance Required: Sealed, non-serviceable design for long-term reliability
Applications
Ideal for speed monitoring in explosive atmospheres including:
Oil and gas production and processing facilities
Chemical and petrochemical plants
Paint and solvent production areas
Pharmaceutical manufacturing in classified areas
Grain handling and milling operations
Mining equipment in flammable atmospheres
Turbomachinery in hazardous zones
Any Zone 1 (gas) or Zone 21 (dust) classified location
Installation Requirements
Mounting: Solid and vibration-free mounting essential
Alignment: Sensor must be aligned to pole wheel according to sensor drawing
Positioning: Mount with middle of face over middle of pole wheel; minimum 3mm from wheel edge
Air Gap: Set smallest possible gap without risk of contact during operation
Cable Routing: Keep sensor wires away from large electrical machines; do not run parallel to power cables
Safety Barriers: Must be connected through appropriate Zener barriers for intrinsically safe operation
Shield Connection: Cable shield must be connected to 0V on equipment side
Safety Notice
Usage Condition: Sensor must be used in undamaged and clean condition only
Modifications: Modifications prohibited unless expressly listed in operating instructions
Cable Limitations: Permissible cable length and capacitance/inductance limits per Certificate supplement must be observed
Temperature Monitoring: Surface temperature must not exceed 2/3 of dust/air mixture ignition temperature where dust clouds present
CE Directives: Installation must comply with CE directives for explosive environment apparatus
Important: This sensor is ATEX certified (ZELM 03 ATEX 0124X) for intrinsically safe operation in explosive atmospheres. Must be installed according to sensor drawing and used with appropriate certified safety barriers. The sensor cannot be repaired - replacement only. Available in 2m, 5m, and 10m cable lengths. Sensor is the same, cable can also be cut. Manufactured by TE Connectivity Sensors (Jaquet brand). For complete installation and safety requirements, refer to the full European Certificate of Conformity and supplements.
Jaquet Speed Sensor DSF 1210.00 SHV (5m)
The Jaquet DSF 1210.00 SHV (5m) is a high-quality, dynamic Hall-effect speed sensor designed for industrial use. This sensor version cable is capable to mounted to High Ambient Temperature locations.
Key Features:
• Housing: M12x1• Detection Capability: Module 1.0 minimum• Cable: 5m Teflon, open wire ends• Temperature Range: -40°C to +125°C• Output: Built-in line amplifier, typically Push-Pull
The Jaquet DSF 1210.00 SHV (5m) is a premium dynamic Hall-effect speed sensor, crafted for demanding industrial applications. Its robust design and precise detection capabilities make it ideal for environments requiring reliable performance in extreme conditions.
Key Features
Housing: Compact M12x1 design for easy installation and compatibility.
Detection Capability: Optimized for Module 1.0 or greater, ensuring precise speed detection.
Cable Length: 5 meters of durable Teflon cable with open wire ends for flexible and secure connections.
Wide Temperature Range: Operates efficiently from -40°C to +125°C, making it suitable for extreme environments.
Output: Equipped with a built-in line amplifier, providing a Push-Pull signal for robust and interference-free output.
This sensor combines durability and precision, making it a dependable choice for various industrial applications such as machinery monitoring, automotive testing, and industrial automation.
Applications
Industrial machinery speed monitoring
Rotational measurement in challenging environments
Automotive testing setups
Why Choose Jaquet DSF 1210.00 SHV?The Jaquet DSF 1210.00 SHV is engineered for accuracy and durability, ensuring reliable performance in high-demand scenarios. Its dynamic detection capability and built-in amplifier ensure superior functionality, even in harsh operating conditions.
For further details or inquiries, please contact us or download the latest full technical datasheet.
Reliable Hall-Effect Speed Sensor for Hazardous Environments
The Jaquet FTG 1088.00 Ex (MPN: 343Z-03772) is a rugged, ATEX-approved Hall-effect speed sensor designed for non-contact rotary speed detection in explosive environments. With a wide frequency range and robust mechanical design, it is ideal for industrial applications such as power generation, oil & gas, and process automation.
Key Features:
Certified for Hazardous Zones: ATEX-certified (II 1G / II 1D) for use in gas and dust explosion-risk environments
Output Signal: Square wave signal, proportional to rotational speed (5 Hz to 20 kHz)
Electrical Specs: 5V ±10% power supply (max. 12V), 25 mA sink current, reverse polarity protected
Connection: 400 mm twisted Teflon-insulated open wire
Housing: Argentan (CuNi10Zn42Pb), hermetically sealed, potted electronics for long-term stability
Environmental Resistance: IP68 sensor head, IP67 cable exit, shock resistance 20 g, vibration 3 g
Operating Temp: -40°C to +125°C
Jaquet FTG 1088.00 Ex Speed Sensor (343Z-03772) – ATEX Certified, 400 mm Open Wire
This sensor works with a ferromagnetic pole wheel (module ≥0.5) and supports air gaps up to 1.3 mm depending on wheel geometry. Its differential Hall sensor design ensures high immunity to electromagnetic interference, delivering clean and reliable pulse output even in harsh conditions.
This product is discontinued without a direct successor. Also, all spare parts were sold out during 2022 so unfortunately we can not support requests for this product anymore.Please check other options to measure.
The DSD 1805.60 AHV is crafted to deliver high durability and efficiency across a wide range of applications. Its robust construction and advanced features make it an ideal choice for demanding professional use.
Key Features of DSD 1805.60 AHV:
High Performance: Engineered to deliver exceptional results
Durable Construction: Built with high-quality materials for long-lasting use
Innovative Design: Incorporates the latest technology for enhanced efficiency
Jaquet FTG 1088.00 Ex-KTV-B Speed Sensor (343Z-05108) – ATEX Approved
The DSD 1005.00 xTV (FTG 1088.xx) is designed with a dynamic behavior that ensures pulse generation even at a frequency as low as 5 Hz.
High-Precision Speed Detection in Hazardous Environments
The Jaquet FTG 1088.00 Ex-KTV-B (MPN: 343Z-05108) is a ferrostat differential Hall-effect speed sensor engineered for reliable operation in explosive atmospheres (ATEX-certified). Designed for integration with ferromagnetic pole wheels, it delivers square wave outputs proportional to rotary speed—even down to 5 Hz.
Built with robust Argentan, also called German Silver (CuNi10Zn42Pb) housing and IP68/IP67 protection ratings, this sensor excels in demanding industrial conditions. It features:
Explosion Protection: Certified for Zone 0/20 (II 1G / II 1D)
Operating Range: 5 Hz to 20 kHz frequency detection
Output Signal: Square wave with 1:1 mark-space ratio
Power Supply: 5V ±10%, max 12V, reverse polarity protected
Temperature Range: -40 to +125°C
Vibration/Shock Resistance: 3g (4–100 Hz), 20g (11 ms)
The sensor includes a Teflon-insulated open wire connection and weighs just 20 grams. Ideal for industries requiring non-contact speed measurement in hazardous zones such as oil & gas, chemical, or heavy machinery sectors.
Cable/Lace Length: 0.130 m (130 mm)Connection: Terminal block
