Product overviewONE Light LED Driver 89200X.200W 48V DC constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89200X
Type: LED Driver
Category: 22 Drivers
Family: The 48V DC Range Constant voltage
Material: Plastic
Length: 205mm
Width: 71mm
Height: 35mm
Warranty: 5 Years
Downloads & links
Datasheet
Manufacturer page
Product overviewONE Light LED Driver 89200VND.200W 24V DC Triac &1-10V dimmable constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89200VND
Type: LED Driver
Category: 22 Drivers
Family: The 24V DC Open Range Dimmable Constant voltage
Material: Metal
Length: 287mm
Width: 50mm
Height: 30mm
Warranty: 3 Years
Downloads & links
Datasheet
Manual
Manufacturer page
Product overviewONE Light LED Driver 89200VP.200W 24V DC constant voltage driver, Waterproof IP67. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89200VP
Type: LED Driver
Category: 22 Drivers
Family: The 24V DC Waterproof IP67 Range Constant voltage
Material: Metal
Length: 260mm
Width: 60mm
Height: 32mm
Warranty: 3 Years
Downloads & links
Datasheet
Manufacturer page
SW80-912PL Solenoid Contactor / Starter Contactor
Genuine SW80-912PL Albright 24V INT Single Pole Single Throw Contactor. The SW80-912PL, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks.
Also with HF3324-LT on hydraulic pumps
Product overviewONE Light LED Driver 89100VLL.30-100W 24V DC DALI and Push to dim dimmable constant voltage driver, suitable to install inside profile, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89100VLL
Type: LED Driver
Category: 22 Drivers
Family: The 24V DC Slim DALI Dimmable Constant voltage
Material: Plastic
Length: 350mm
Width: 30mm
Height: 18mm
Warranty: 5 Years
Downloads & links
Datasheet
Manual
Manufacturer page
Professional inverter 24V to 230V AC for rough environmental conditions.
▪ IN: 24V / OUT: 230V/50Hz▪ Input: 2x open cable ends▪ Output: open cable ends
Weight: 8 kg
waterproof
starts automatically, 5mA standby
perfectly suitable for fixed installation in service vehicle, separate socket
100% overload possible
Attention: no sinus, but almost all consumers can be connected
Input
voltage:
20 ... 30V DC
Output voltage:
225V +3% / -5%, 50Hz quartz generated (115V/ 60Hz optional)
Output power:
600VA permanent, 1,200VA 10min, 12A (24A at 115V) 4sec
Connection input:
2x open cable end
Connection output:
open cable end
Cable length input:
2x app. 1200mm
Cable length output:
app. 2300mm
Current without load:
standby current 5mA RMS at 12V
Switching level:
start at 1W load
Current at 1W load:
0.6A at 26V
Overvoltage:
>33V, self-resetting
Undervoltage:
off at 20V, on at 22V
Efficiency:
app. 95% at 100% load / app. 80% at 10% load / app. 80% at
200% load
Electrical protection:
against reverse polarity, overtemperature, short circuit
Mechanical protection:
aluminum casting case
Dimensions:
260 x 160 x 90mm (without screwings) without cable outlet
Mass:
app. 8,000g incl. Cables
Signalform:
step weave with fast PWM-modulation (to cos phi 0.2 at 50%
load)
Safety:
potential division with potential compensation (protective
conductor)
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.The SW180B has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks. Developed for both interrupted and uninterrupted loads, the SW180B is suitable for switching Resistive, Capacitive and Inductive loads.The SW180B features single pole single throw, double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SW180B has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via M5 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
