Original SB175 Anderson Contact ( sold per piece ) Based on the design pioneered by Anderson in 1953, APP® ’s two pole SB® connectors set the standard for DC power distribution and battery connections. SB® 175 connectors feature a one-piece plastic housing using stainless steel springs to hold low-resistance contacts in place.
In case you are using metric cables, here is a quick reference table to pick the correct version of contact:
AWG and the suitable metric cable1/0 AWG = 50mm21 AWG = 35-50 mm2 (thin 50mm2 or thick/hard 35mm2)2 AWG = 35mm24 AWG = 25mm26/8 AWG = 16mm2
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.The SW200 has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks. Developed for both interrupted and uninterrupted loads, the SW200 is suitable for switching Resistive, Capacitive, and Inductive loads. The SW200 features single pole single throw, double-breaking main contacts with silver alloy tips, which are weld resistant, hardwearing, and have excellent conductivity. The SW200 has M10 stud main terminals and 6.3mm spade coil connections. It can be mounted via M5 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be horizontal or vertical, when vertical the M10 contact studs should point upwards.
Product overviewONE Light LED Driver 89075W.75W 12V DC Constant Voltage LED driver. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89075W
Type: LED Driver
Category: 22 Drivers
Family: The 12V DC Range Constant voltage
Material: Plastic
Length: 170mm
Width: 57mm
Height: 32mm
Warranty: 5 Years
Downloads & links
Datasheet
Manufacturer page
SW84B-4 Albright
Magnetic Blowouts
These contactors are fitted with magnetic blowouts - denoted by 'B' suffix in the SW84B range) across contact gaps. These enable high currents to be ruptured very quickly so that arcing time is reduced to a minimum. Fitting of blowouts can make the contacts polarity sensitive and the positive markings on the top cover of the contactor must be observed.
About Continuous - CO.) SW84B-4 Solenoids
Continuous contactors by design are predominantly for drive functions on vehicles, they switch slower than intermittent solenoids and are recommended for prolonged contact periods.
The SW84 has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or mounting brackets purchased as separate items. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards. Please note Normally Closed contacts are not suited to make and break load.
Product overviewONE Light LED Driver 89300VP.300W 24V DC constant voltage driver, Waterproof IP67. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89300VP
Type: LED Driver
Category: 22 Drivers
Family: The 24V DC Waterproof IP67 Range Constant voltage
Material: Metal
Length: 240mm
Width: 72mm
Height: 33mm
Warranty: 3 Years
Downloads & links
Datasheet
Manufacturer page
100W 24V DC constant voltage driver slim range ideal to install inside the profile, IP20.
Complies with standard EN61347-1 and any other specific standards.
Product overviewONE Light LED Driver 89100VT.100W 24V DC TRIAC dimmable constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89100VT
Type: LED Driver
Category: 22 Drivers
Family: The 24V DC Range TRIAC Dimmable Constant voltage
Material: Plastic
Length: 205mm
Width: 71mm
Height: 35mm
Warranty: 5 Years
Downloads & links
Datasheet
Manufacturer page
Product overviewONE Light LED Driver 89075VL.75W 24V DC constant voltage driver slim range ideal to install inside the profile, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89075VL
Type: LED Driver
Category: 22 Drivers
Family: The 24V DC Slim Range Constant voltage
Material: Plastic
Length: 305mm
Width: 30mm
Height: 19mm
Warranty: 5 Years
Downloads & links
Datasheet
Manufacturer page
Product overviewONE Light LED Driver 89150VP.150W 24V DC constant voltage driver, Waterproof IP67. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89150VP
Type: LED Driver
Category: 22 Drivers
Family: The 24V DC Waterproof IP67 Range Constant voltage
Material: Metal
Length: 194mm
Width: 63mm
Height: 38mm
Warranty: 3 Years
Downloads & links
Datasheet
Manufacturer page
About Intermittent - Intermittent SW82-3 Solenoid
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods. The contactors are compact in size and are fully serviceable with a full range of spare parts available. The SW82 has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or by purchasing mounting brackets. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
