Product overviewONE Light LED Driver 89150VLT.30-150W 24V DC TRIAC dimmable constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89150VLT
Type: LED Driver
Category: New 2025 Edition 2
Family: Drivers
Material: Plastic
Length: 357mm
Width: 32mm
Height: 23mm
Warranty: 5 Years
Downloads & links
Datasheet
Manufacturer page
Magnetic Blowouts These open case contactors are of double break configuration and are fitted with magnetic blowouts - denoted by 'B' suffix in the SW60B range) across both contact gaps. These enable high currents to be ruptured very quickly so that arcing time is reduced to a minimum. Fitting of blowouts makes the contacts polarity sensitive and the positive markings on the top cover of the contactor must be observed.About Intermittent - Int.) SW60B Solenoids Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods. The SW60B features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SW60B has M6 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be on the side or base of the contactor.
High-end voltage converter with medium power for 12V devices at 24V car line.▪ IN: 24V / OUT: 12V▪ Connection: 3-pol plug▪ 10A\n\n \n \n \n Weight: 0.385 kg\n \n
\n
provides permanent plus (term. 30) or ignition plus (term. 15) up to the maximum load
concept of high development standard: - real voltage division, discharge protection of 12V device is effective -significant low self current consumption of 0,7 mA - very high efficiency of about 94%
overload capacity up to 15A for about 5 min.
small dimensions
compact plug (AMP Mate Lock)
5kW-peak-safety-diode to prevent overvoltage from car line
\n
\n \n
\n Input\n voltage:\n 16 ... 30V DC\n \n \n Output voltage:\n 8 ... 15V DC input voltage gets halved\n \n \n Output current:\n 10A permanent, 15A for about 5 min.\n \n \n Connection:\n 3-poles connector, round contacts (AMP Mate Lock)\n \n \n Current without load:\n 0,7mA at 24V\n \n \n Efficiency:\n app. 94%\n \n \n Temperature range:\n -40 ... +75°C, derating T>45°C\n \n \n Electrical protection:\n overcurrent, overtemperature, input transients\n \n \n Mechanical protection:\n entirely sealed\n \n \n Dimensions:\n 129 x 70 x 25mm incl. Plug\n \n \n Mass:\n app. 385g\n \n \n Technical principle:\n ignition plus (term 15) connects the second output\n \n
DC182-491 Albright Motor Reversing Solenoid - Intermittent (INT)
The DC182-491 Albright 150A 24V DC - INT Motor Reversing Solenoid Contactor is a specialized electrical component designed for controlling the direction of rotation of a motor in applications requiring a 24-volt DC power supply. Let's delve into the details of this contactor:
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.
DC182-491: This alphanumeric code serves as the unique identifier or model number for this particular contactor within Albright's product range.
Albright: As mentioned before, Albright is a reputable manufacturer of electrical contactors and related components, known for producing high-quality products.
150A: This denotes the maximum current rating of the contactor, which is 150 amperes. It indicates the maximum amount of current the contactor is designed to handle safely in its operational environment.
24V DC: Unlike the previous example, this contactor is specifically designed to operate with a DC voltage of 24 volts. This voltage powers the coil within the contactor, which is used to control the switching of the main circuit.
INT: Similar to the previous description, "INT" signifies that this contactor is suitable for intermittent or interruptible operations, meaning it can handle applications where the current flow may vary or be temporarily interrupted.
Motor Reversing Solenoid Contactor: This indicates the primary function of the contactor, which is to control the direction of rotation of a motor. The solenoid within the contactor is responsible for reversing the polarity of the current flow to change the motor's direction.
Regarding voltage compatibility, the main circuit can be operated at any DC voltage up to a maximum of 96 volts with blowout capability. However, it's important to note that 48 volts is the recommended maximum voltage for optimal performance and safety.
DC182-491 Albright 150A 24V DC - INT Motor Reversing Solenoid Contactor is a heavy-duty electrical component designed by Albright for controlling the motor direction in applications requiring a 24-volt DC power supply. It boasts a maximum current rating of 150 amperes and is suitable for intermittent operations. Additionally, it offers flexibility in main circuit voltage compatibility, with a recommended maximum of 48 volts for best performance and safety.
The DC182 is a monoblock construction, resulting in a neat compact design that is compatible with modern electronic control systems. The DC182 is physically and electrically interchangeable with the SW182 reversing contactor but rewiring will be required.
This version of the DC182 has M8 stud main terminals and a flying lead coil energising connection. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
The SW80P features an enclosed top cover and offers environmental protection to IP66. The SW80P has M8 stud main terminals and 6.3mm spade coil connections. Mounted using supplied brackets, mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.The SW200 has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks. Developed for both interrupted and uninterrupted loads, the SW200 is suitable for switching Resistive, Capacitive, and Inductive loads. The SW200 features single pole single throw, double-breaking main contacts with silver alloy tips, which are weld resistant, hardwearing, and have excellent conductivity. The SW200 has M10 stud main terminals and 6.3mm spade coil connections. It can be mounted via M5 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be horizontal or vertical, when vertical the M10 contact studs should point upwards.
Product overviewONE Light LED Driver 89240VL.240W 24V DC constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89240VL
Type: LED Driver
Category: New 2025 Edition 2
Family: Drivers
Material: Plastic
Length: 320mm
Width: 30mm
Height: 18mm
Warranty: 5 Years
Downloads & links
Datasheet
Manufacturer page
About Continuous - CO.) SW82-4 Solenoids Continuous contactors by design are predominantly for drive functions on vehicles, they switch slower than intermittent solenoids and are recommended for prolonged contact periods. The contactors are compact in size and are fully serviceable with a full range of spare parts available. The SW82 has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or by purchasing mounting brackets. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Product overviewONE Light LED Driver 89090VL.10-90W 24V DC DALI and Push to dim dimmable constant voltage driver, IP20.Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89090VL
Type: LED Driver
Category: New 2025 Edition 3
Family: Drivers
Material: Plastic
Length: 140mm
Width: 80mm
Height: 35mm
Warranty: 5 Years
Downloads & links
Datasheet
Manual
Manufacturer page
Product overviewONE Light LED Driver 89150V.150W 24V DC constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89150V
Type: LED Driver
Category: 22 Drivers
Family: The 24V DC Range High Power Constant voltage
Material: Plastic
Length: 205mm
Width: 71mm
Height: 35mm
Warranty: 5 Years
Downloads & links
Datasheet
Manufacturer page
