Product overviewONE Light LED Driver 89040VT.40W 24V DC TRIAC dimmable constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89040VT
Type: LED Driver
Category: 22 Drivers
Family: The 24V DC Range TRIAC Dimmable Constant voltage
Material: Plastic
Length: 170mm
Width: 57mm
Height: 32mm
Warranty: 5 Years
Downloads & links
Datasheet
Manufacturer page
Magnetic Blowouts These open case contactors are of double break configuration and are fitted with magnetic blowouts - denoted by 'B' suffix in the SW60B range) across both contact gaps. These enable high currents to be ruptured very quickly so that arcing time is reduced to a minimum. Fitting of blowouts makes the contacts polarity sensitive and the positive markings on the top cover of the contactor must be observed.About Continuous - CO.) SW60B Solenoids Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods. The SW60B features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SW60B has M6 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be on the side or base of the contactor.
Step-up converter of a higher power for 24V devices at 12V car line.
▪ IN: 12V ... 24V / OUT: 24V▪ Connection: open cable end▪ 20(22)A
Weight: 1.1 kg
Converts input voltage from 12V to constant 27V
electronic protection against reverse polarity and misconnection without short circuit impact
suitable for 24V voltage boosting (wide range input)
protection against overload
reverse voltage proof independent from polarity
Input\n voltage:
10 ... 33V DC
Input current:
max. 60A (12V)
Output voltage:
27V DC +-5% (27 ... 32V if input\n above 27V)
Output current:
0 ... 20A (22A /20% on-time circle))
Connection:
the connection cable is sealed in\n the device, open ending
Cable length:
app. 550mm
Current without load:
<4mA (12V)
Efficiency:
app. 92%
Temperature range:
-40°C ... +75°C
Electrical protection:
overtemperature, overcurrent, reverse polarity
Mechanical protection:
entirely sealed (IP69K)
Dimensions:
200 x 70 x 40mm without cable outlet
Mass:
app. 1100g
SW80-35 Albright 12V CO (125A)
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
The SW80-35 Albright 125A Single Acting Solenoid Contactor 12V CO is an electromechanical device designed for high-power switching applications, particularly in electric vehicle (EV) and industrial environments. This specific model, part of the broader SW80 series by Albright, has been engineered to offer reliable performance in single acting (or single throw) operations, where the solenoid is used to connect or disconnect a circuit.
Key Features:
Voltage Rating: The unit operates at 12V, making it suitable for a wide range of low voltage applications, including but not limited to electric vehicles, marine, and heavy machinery control systems.
Current Capacity: With a 125A continuous current rating, it can handle significant electrical loads, making it ideal for applications requiring high power throughput.
Single Acting (CO): CO stands for "Change Over," indicating that the solenoid can switch between two states. However, in the context of the SW80-35, single acting typically means it has one active position, usually engaged when power is applied, and returns to its default position when power is removed, thanks to a return spring.
Durability: Designed for demanding applications, it features robust construction that can withstand the rigors of heavy-duty use, including vibrations and temperature fluctuations.
Versatility: Its compact size and reliable switching capability make it suitable for a wide variety of applications, from battery management to safety cut-offs and beyond.
Applications:
The SW80-35 Albright solenoid contactor is versatile and finds applications in several areas, such as:
Electric Vehicles: It can be used for controlling the main power supply from the battery pack to the vehicle's motor controller, ensuring efficient power management and safety.
Industrial Equipment: For machinery that requires high current control, the SW80-35 can act as a reliable switching mechanism for motors, pumps, and other heavy electrical loads.
Marine Applications: Its robust design makes it suitable for marine environments where corrosion resistance and reliability are crucial for managing electrical systems on boats and ships.
Renewable Energy Systems: In solar or wind energy installations, it can serve as an essential component for managing the flow of electricity from generation sources to storage or grid interfacing.
Advantages:
High Reliability: The Albright SW80 series, including the SW80-35 model, is known for its reliability in various environmental conditions, ensuring consistent performance over time.
Ease of Installation: Its straightforward design allows for easy integration into existing systems without the need for extensive modifications.
Safety: Designed with safety in mind, it ensures a secure electrical connection, reducing the risk of accidental disconnections or failures that could lead to equipment damage or safety hazards.
Conclusion:
The SW80-35 Albright 125A Single Acting Solenoid Contactor 12V CO is a critical component for applications requiring reliable and high-capacity switching capabilities. Its design and construction cater to a broad range of applications, emphasizing reliability, durability, and safety. Whether used in electric vehicles, industrial machinery, marine applications, or renewable energy systems, the SW80-35 offers a solution that engineers and technicians can trust for their critical electrical switching needs.
Genuine SW80-357P Albright Contactor. The SW80-357P, a Albright SW80 -series contactor with IP66 protection - P), has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks as well as
Product overviewONE Light LED Driver 89240XL.240W 48V DC constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89240XL
Type: LED Driver
Category: New 2025 Edition 2
Family: Drivers
Material: Plastic
Length: 320mm
Width: 30mm
Height: 18mm
Warranty: 5 Years
Downloads & links
Datasheet
Manufacturer page
15-150W 24V DC DALI and Push to dim dimmable constant voltage driver, suitable to install inside profile, IP20.
Complies with standard EN61347-1 and any other specific standards.
SW181A-48 ALBRIGHT 24V 150A CO DC - Contactor
The SW181A-48, a SW181 series of contactor with auxilary contacts (A) fitted, has been designed for direct current loads. This including motors on electric vehicles such as industrial trucks.
Albright SW201A-14 24V DC CO
Genuine SW201A-14 Albright 24V Single Pole Double Throw Contactor. The SW201A-14, an SW201 series of contactors with - (A) auxiliary contacts fitted, has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks.
Coil type: Continuous energization
Albright DC182B-7 48V DC INT Contactor with Magnetic Blowouts
The DC182B-7 contactors, tailored for intermittent energization (INT), feature magnetic blowouts, as indicated by the 'B' suffix in their model number. These blowouts are essential for rapidly interrupting high currents, significantly reducing arcing time. The inclusion of blowouts renders the device polarity sensitive, requiring users to carefully adhere to the positive markings on the contactor's top cover during installation.
Insights on the DC182B-7 Motor Reversing Solenoid
Designed for intermittent operation, the DC182B-7 contactors are optimal for hydraulic functions in vehicles, providing make-and-break actions that are precisely timed for such applications. This intermittent design ensures reliability and durability where activation periods are not continuous, aligning with the needs of various industrial applications.
The DC182B-7 showcases a monoblock construction, offering a compact and efficient design that integrates seamlessly with contemporary electronic control systems. While it shares compatibility with other models in terms of physical and electrical characteristics, it is specifically designed for 48V systems and may require rewiring when replacing other models.
Equipped with M8 stud main terminals and 6.3mm spade coil connections, this unit ensures ease of installation and broad compatibility. It includes an integral bracket for mounting, which can be positioned either horizontally or vertically. For vertical installations, it is crucial to ensure the M8 contact studs are oriented upwards.
Technical data of DC182B-7:
Model
DC182B-7
Part Number
DC182B-7
Brand
Albright
Colour
Black/Silver
Voltage
48V DC
Amperage
150A
Material
Copper/Silver/Bakelite
Coil Type
Intermittent
