About the DC88-492L Motor Reversing Solenoid
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.
he main contact circuit, designed for motor reversing, has a built in failsafe, so that if both coils are energised simultaneously the contact arrangement is open circuit. Coil connections are by means of 6.3mm spades and mounting is via M4 screws on a panel fixture or using an additional bracket - e.g. part number: 2070-41) and can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
High-end voltage converter with medium power for 12V devices at 24V car
line. For the simultaneous supply of permanent plus and ignition plus.▪ IN: 24V / OUT: 12V▪ Connection: 5-pol plug▪ 10A Permanent positive and ignition positive
Weight: 0.385 kg
provides permanent plus (term. 30) and ignition plus (term. 15) up to the maximum load
concept of high development standard: - real voltage division, discharge protection of 12V device is effective - significant low self current consumption of 0,7 mA - very high efficiency of about 94%
overload capacity up to 15A for about 5 min.
small dimensions
compact plug (AMP Mate Lock)
5kW-peak-safety-diode to prevent overvoltage from car line
Input
voltage:
16 ... 30V DC
Output voltage:
8 ... 15V DC input voltage gets halved
Output current:
10A permanent, 15A for about 5 min.
Connection:
5-poles connector, round contacts (AMP Mate Lock)
Current without load:
0,7mA at 24V
Efficiency:
app. 94%
Temperature range:
-40 ... +75°C, derating T>45°C
Electrical protection:
overcurrent, overtemperature, input transients
Mechanical protection:
entirely sealed
Dimensions:
129 x 70 x 25mm incl. Plug
Mass:
app. 385g
Technical principle:
ignition plus (term 15) connects the second output
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.The SW180AB has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks. Developed for both interrupted and uninterrupted loads, the SW180B is suitable for switching Resistive, Capacitive and Inductive loads.The SW180AB features single pole single throw, double-breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SW180B has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via M5 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Albright DC66-73P 24V DC HO
80 Amps motor-reversing switch solenoid, very intermittent coil.
The DC66P series, which includes compact 80A contactors, is designed in alignment with the proven SW60 mono-block contactors, specifically tailored for motor reversing applications. These contactors are particularly well-suited for use in small battery-powered winches, windlass winches, vehicle-mounted cranes, and small electric vehicles, among other applications. The contactors feature enclosed contact housings and are sealed to prevent the entry of moisture or other contaminants, making them suitable for environments requiring IP66 protection.
The construction of these contactors adheres to the highest standards of quality, utilizing top-grade materials such as phenolic contact housings, silver-alloy contacts, and Class H (180°C) winding wire for the coils, ensuring durability and reliability in demanding applications. It is important to note that a repair kit is not available for this unit, emphasizing the contactor's reliability and maintenance-free design tailored for critical applications with a very intermittent coil version, operating at a 10% duty cycle.
Dimensions:
Height including terminals and coil base cap: 87.9 mm.
Width: 63.9 mm.
Depth (including bracket): 47.2 mm.
Technical specification:
Type : DC66-73PCoil Voltage (V) 24 HO DCCoil Resistance (Ohms) 31Pull In Voltage (V) 15.0 MaximumDrop Out Voltage (V) 6.0 MaximumCoil Power Dissipation (W) 18.58Additional Features: -
All figures above are stated at 20 degrees Celsius.
Additional Information
Very Intermittent contactors by design are mostly used for hydraulic functions on vehicles. They make and break much quicker than continuous solenoids and are not recommended for prolonged contact periods.
The DC66P is a compact contactor that adheres to the design principles of Albright mono block contactors, specifically tailored for the purpose of motor reversing. This device is designed for use with Direct Current (DC) loads and is fully compatible with contemporary electronic control systems. It boasts an IP66 seal, making it perfectly suited for applications that include battery-powered winches, vehicle-mounted cranes, and small electric vehicles. Engineered to handle both interrupted and uninterrupted loads, the DC66P can efficiently manage Resistive, Capacitive, and Inductive loads.
It features a built-in fail-safe mechanism within the main contact circuit, ensuring that in instances where both coils are energized at the same time, the contact arrangement remains in an open circuit condition. The main contacts of the DC66P utilize a double breaking mechanism with tips made of silver alloy, providing resistance to welding, durability, and superior conductivity. The device includes M6 main stud terminals for connections, while the coil connections are facilitated through 6.3mm spade terminals.
Jaquet Zero Speed DSY 1205.01 AHW 374Z-05124
The DSY 1205.01 AHW [8 .. 32 VDC, PP] Hall sensor is suitable, in conjunction with a pole wheel, for generating square wave signals proportional to rotary speeds. It has a static behavior, so that pulse generation is guaranteed down to a speed corresponding to a frequency of 0Hz. The monitoring element consists of a magnetically biased hall effect semiconductor. Several amplifier variants are offered for covering a wide application range. The internal two-channel structure means that the sensor must be oriented. The sensors have a special orientation sleeve with pin for ease of installation.
Length: 75 mmWeight: 32 grams
The notation "8 .. 32 VDC, PP" indicates the power supply requirements for the device.
"8 .. 32 VDC" suggests that the device operates with a direct current (DC) voltage supply within the range of 8 to 32 volts. This means it can be powered by any DC source within this voltage range.
"PP" stand for "Peak-to-Peak" voltage, indicating the peak-to-peak voltage of the signal the device is capable of handling.
Product overviewONE Light LED Driver 89030VL.30W 24V DC constant voltage driver slim range ideal to install inside the profile, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89030VL
Type: LED Driver
Category: 22 Drivers
Family: The 24V DC Slim Range Constant voltage
Material: Plastic
Length: 251mm
Width: 30mm
Height: 16mm
Warranty: 5 Years
Downloads & links
Datasheet
Manufacturer page
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.The SW200 has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks. Developed for both interrupted and uninterrupted loads, the SW200 is suitable for switching Resistive, Capacitive, and Inductive loads. The SW200 features single pole single throw, double-breaking main contacts with silver alloy tips, which are weld resistant, hardwearing, and have excellent conductivity. The SW200 has M10 stud main terminals and 6.3mm spade coil connections. It can be mounted via M5 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be horizontal or vertical, when vertical the M10 contact studs should point upwards.
About the DC88-554L Motor Reversing Solenoid Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods. The main contact circuit, designed for motor reversing, has a built-in failsafe, so that if both coils are energized simultaneously the contact arrangement is open circuit. Coil connections are by means of 6.3mm spades and mounting is via M4 screws on a panel fixture or using an additional bracket - e.g. part number: 2070-41) and can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
High-end voltage converter of a higher power for 12V consumers at a 24V car line.▪ IN: 24V / OUT: 12V▪ Connection: 3-pol plug▪ 26A\n \n\n \n \n\n \n \n \n Weight: 0.93 kg\n \n
\n
concept of high development standard: - real voltage division, discharge protection of 12V device is effective - significant low self current consumption of 0,7mA - very high efficiency of about 94%
overload capacity up to 35A for about 5 min.
small dimensions
high-power-plug of high quality
5kW-peak-safety-diode to prevent overvoltage from car line
\n \n
\n Input\n voltage:\n 16 ... 30V DC\n \n \n Output voltage:\n 8 ... 15V DC input voltage gets halved\n \n \n Output current:\n 26A permanent, 35A for about 5 min.\n \n \n Connection:\n 3-pole plug "Anderson Powerpole Modular"\n \n \n Cable length:\n _\n \n \n Current without load:\n 0,7mA at 24V\n \n \n Efficiency:\n app. 92%\n \n \n Temperature range:\n -40 ... +75°C, derating T>45°C\n \n \n Electrical protection:\n overcurrent, overtemperature, input transients\n \n \n Mechanical protection:\n entirely sealed\n \n \n Dimensions:\n 200 x 70 x 40mm without cable outlet\n \n \n Mass:\n app. 930g\n \n
