Product overviewONE Light LED Driver 89150VN.150W 24V DC constant voltage driver, Open Range IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89150VN
Type: LED Driver
Category: 22 Drivers
Family: The 24V DC Open Range Constant voltage
Material: Metal
Length: 160mm
Width: 98mm
Height: 30mm
Warranty: 3 Years
Downloads & links
Datasheet
Manufacturer page
SW80-6 Albright 24V Solenoid Switch. The SW80-6, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks.
Product overviewONE Light LED Driver 89320X.320W 48V DC constant voltage driver, IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89320X
Type: LED Driver
Category: 22 Drivers
Family: The 48V DC Range Constant voltage
Material: Plastic
Length: 210mm
Width: 80mm
Height: 37mm
Warranty: 5 Years
Downloads & links
Datasheet
Manufacturer page
Albright HV500F-73S – High Voltage Electromechanical DC ContactorThe Albright HV500F-73S is a hermetically sealed electromechanical DC contactor in the HV500 family, designed to switch DC power using physical main contacts. It is not a solid-state relay. The listed 48V DC refers to the control-coil voltage, not the voltage switched by the main contacts.Key features
Electromechanical switching with normally open (NO) main contacts
Hermetically sealed high-voltage DC contactor design
HV500 family specifications include high-voltage operation up to 1000V DC, subject to application-dependent ratings
High-current switching for properly engineered DC circuits; verify continuous, making and breaking ratings for the specific operating conditions
Configuration and applicationsThe product listing identifies an intermittent-duty configuration; verify coil operating limits and duty cycle with the manufacturer's part-specific documentation.Typical application areas include electric vehicles, battery packs, DC charging, renewable energy, energy storage and industrial DC distribution, where the part's voltage and current capabilities meet system requirements.Engineering note: HV500 contactors do not replace external fuses, circuit breakers, or suitable pre-charge arrangements. Verify current and voltage under load, coil supply, operating duty, auxiliary contacts, mounting and environmental requirements for the exact model.Manufacturer reference: Albright HV500 product family.
SW200A-14 Albright 250A/400A 48V INT 1-pole 1-throw Contactor
Product Overview: SW200A-14
The SW200A-14 by Albright is a high-performance 1-pole, 1-throw contactor designed for applications requiring reliable current switching in DC circuits. With a 48V DC operational voltage and capable of handling 250A continuous and 400A intermittent currents, this contactor is ideal for various industrial and automotive applications, such as electric vehicles, forklifts, and battery-powered systems.
Key Features
High Current Capacity: Supports 250A continuous and up to 400A intermittent operations, ensuring robust performance in demanding environments.
Durable Design: Equipped with silver-alloy tips on the contacts, providing excellent wear resistance and preventing welding during high-current switching operations.
Double-Break Contacts: Ensures reliable disconnection even under heavy loads, improving overall safety.
Single Pole, Single Throw (SPST): Simple, reliable control for switching in your circuit.
48V DC Operation: Suitable for various DC applications, especially in high-voltage electric vehicle or industrial setups.
Applications
Electric Vehicles
Material Handling Equipment (e.g., forklifts, cranes)
Battery Management Systems
Solar Power Inverters
Industrial Automation
Technical Specifications
Current Rating: 250A (continuous), 400A (intermittent)
Voltage Rating: 48V DC
Contact Type: 1-pole, 1-throw (SPST)
Contact Material: Silver alloy, double-breaking
Mounting: Versatile, with multiple orientation options for flexible installation.
Benefits
The SW200A-14 ensures high reliability and efficiency in applications where frequent switching under load is required. Its hard-wearing silver-alloy tips and double-break design make it a durable and safe choice, providing peace of mind in your DC power control systems.
Magnetic Blowouts These contactors are fitted with magnetic blowouts across the contact gaps as standard. These enable high currents to be ruptured very quickly so that arcing time is reduced to a minimum. Fitting of blowouts can make the contacts polarity sensitive and the positive markings on the top cover of the contactor must be observed.About Intermittent - INT) SW201-241 Solenoids Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods. The SW201 has M10 stud main terminals and 6.3mm spade coil connections. It can be mounted via M5 tapped holes or mounting brackets purchased as separate items. Mounting can be horizontal or vertical, when vertical the M10 contact studs should point upwards. Please note Normally Closed contacts are not suited to make and break load.
Interrupted current - opening and closing on load with frequent switching - results in increased contact resistance).
Uninterrupted current - no or infrequent load switching requirements - maintains a lower contact resistance).
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.The SW180B has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks. Developed for both interrupted and uninterrupted loads, the SW180B is suitable for switching Resistive, Capacitive and Inductive loads.The SW180B features single pole single throw, double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SW180B has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via M5 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
SW180AB-51 is an 48 volt intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.
The SW180AB has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks. Developed for both interrupted and uninterrupted loads, the SW180B is suitable for switching Resistive, Capacitive and Inductive loads.
The SW180AB features single pole single throw, double-breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity.
The SW180B has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via M5 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
ALBRIGHT 24V 250A INT DC ContactorThe SW200-281, a SW200 series of contactor is designed for direct current loads. SW200 have double breaking main contacts with silver alloy tips. Contact tips are weld resistant, extremely hard wearing. Normally Open contacts.
Product overviewONE Light LED Driver 89060VN.60W 24V DC constant voltage driver, Open Range IP20. Complies with standard EN61347-1 and any other specific standards.Key specifications
Product code: 89060VN
Type: LED Driver
Category: 22 Drivers
Family: The 24V DC Open Range Constant voltage
Material: Metal
Length: 111mm
Width: 78mm
Height: 36mm
Warranty: 3 Years
Downloads & links
Datasheet
Manufacturer page
