Albright SW201A-14 24V DC CO
Genuine SW201A-14 Albright 24V Single Pole Double Throw Contactor. The SW201A-14, an SW201 series of contactors with - (A) auxiliary contacts fitted, has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks.
Coil type: Continuous energization
Albright SW560A-38M 24V Magnetically Latched Contactor (INT.)
Albright International SW560A-38M is a 24 Volt single-pole, single-throw (SPST)
magnetically latched solenoid contactor, intermittent rated, supplied with auxiliary microswitch.
The SW560A is designed for telecommunications and power distribution applications
where an uninterrupted current load is switched. These contactors are primarily
intended for Direct Current (DC) loads but may also be used with Alternating Current (AC).
Key Features
24V coil voltage
Single-pole, single-throw (SPST)
Magnetically latched design
Intermittent duty (INT.)
Auxiliary microswitch fitted
Double-breaking main contacts
Silver-alloy contact tips – weld-resistant and high conductivity
Silver-plated main contacts (standard)
Special operating knob and extension fitted
Yellow warning label fitted
About Intermittent (INT.) SW560A Solenoids
Intermittent contactors are typically used for hydraulic functions on vehicles.
They make and break faster than continuous duty solenoids and are not recommended
for prolonged contact periods.
Magnetic Latching Function
The contact position is secured using a permanent magnet within the assembly.
The coil requires a pulse to close the contacts and a reverse-polarity pulse
to open them. Once operated, the contactor remains in its last energised state
without requiring continuous power.
Please note: magnetically latched contactors are not failsafe devices.
Mounting Information
The SW560A is a compact contactor that can be busbar-mounted vertically or horizontally.
If mounted vertically, the coil should be positioned at the bottom.
Auxiliary Microswitch
This version includes an auxiliary microswitch mounted on the top cover.
The auxiliary contact connection is triggered by coil energising.
Uninterrupted Current Applications
Suitable for applications with no or infrequent load switching requirements,
helping to maintain lower contact resistance over time.
Associated Parts (Recommended)
2155-165 Vertical mounting bracket (2 pcs recommended)
2065-167A Horizontal mounting bracket kit (1 pc recommended)
Technical Specifications
Device Type: NO – SP – ST Latching
Voltage: 24V D.C.
Coil Type: Intermittent
Thermal Current Rating: 600A
Application: Uninterrupted
Guideline Weight: 1.1 kg
Operating Ambient Temperature: -40°C to +60°C
Coil Data
Coil Resistance: 17 Ω
Pull-In Voltage: 17.0V (Maximum)
Drop-Out Voltage: 17.0V (Maximum)
Coil Power Dissipation: 33.88 W
Typical Pull-In Time: 30 ms
Electrical Performance
Voltage Drop per Pole (New Contacts at 600A): < 50 mV
Intermittent Current Rating
30% Duty: 1095A
40% Duty: 950A
50% Duty: 850A
60% Duty: 775A
70% Duty: 715A
SW60-4 solenoid contactor for 24V DC -Continuous coil operation
About Continuous - CO SW60 Solenoids
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
The SW60 features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SW60 has M6 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be on the side or base of the contactor.
About Continuous - CO.) SW60 Solenoids
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods. The SW60 features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SW60 has M6 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or steel mounting brackets - supplied as separate items). Mounting can be on the side or base of the contactor.
SW60-40P Albright 24V DC CO
Continuous contactors by design are predominantly for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
The SW60-40P features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SW60P incorporates an enclosed top cover and offers environmental protection to IP66. The SW60P has M6 stud main terminals and 6.3mm spade coil connections.
SW60A-22 – Technical Description
The SW60A-22 is a single-pole DC contactor engineered for dependable switching of medium-current DC loads. It is equipped with a 24 V DC continuous-duty (CO) coil, providing stable performance in applications where long energization periods are required.
This model includes auxiliary contacts, allowing easy implementation of status indication or interlock functions in control systems.
The contactor offers a cut-off (breaking) current rating of 80 A at 48 V DC, making it well-suited for battery-powered systems, mobility equipment, industrial machinery, and a wide range of DC power management applications.
As a core model in the SW60A series, the SW60A-22 provides a compact design and standard mounting footprint, ensuring compatibility with common DC systems and OEM installations. Same contactor with a bracket fitted here.
Key Features
Single-pole DC contactor for medium-current DC switching
24 V DC continuous-duty (CO) coil for stable long-term operation
Integrated auxiliary contacts for signalling or interlock logic
Cut-off current rating: 80 A at 48 V DC
Compact footprint suited for a variety of OEM and industrial applications
Reliable construction for battery, mobility, and DC power systems
SW60A-232 – Technical Description
The SW60A-232 is a single-pole DC contactor designed for reliable switching of medium-current DC loads. It is equipped with a 24 V DC continuous-duty (CO) coil, ensuring stable performance in applications requiring long energization times.
This model includes auxiliary contacts for status signalling or interlock functions.
The contactor is rated for a cut-off (breaking) current of 80 A at 48 V DC, making it suitable for battery systems, mobility equipment, industrial controls, and other DC power applications.
Structurally, the SW60A-232 is based on the SW60A-22 contactor, with an added 3060-94 mounting bracket, providing extended compatibility for panel or frame installation.
Key Features
Single-pole DC contactor for medium-current applications
24 V DC continuous-duty (CO) coil for long energization periods
Integrated auxiliary contacts for signalling or interlock logic
Cut-off current rating: 80 A at 48 V DC
Based on SW60A-22 with added 3060-94 mounting bracket
Suitable for battery systems, mobility equipment and industrial controls
Manufacture year 2016
Fully working and new
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via the integral bracket formed into the coil housing case. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
SW80-1 Albright Intermittent 24V Single Pole Single Throw Contactor
The SW80-1, an Albright SW80 -series contactor has been developed for direct current loads, including motors as used in a variety of applications including electric vehicles, materials handling equipment, winches, Hydraulic Power Packs, Engine Starting, Standby Power, Lighting applications, Telecommunications, and D.C. System Electrics.
Genuine SW80-1005L Albright 24V Single Pole Single Throw Contactor with Suuret Kärjet installed. The SW80-1005L, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles li
Genuine SW80-105 Albright 24V Single Pole Single Throw Contactor. The SW80-105, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks as well a
Albright SW80-116 24V DC CO (125A)
The SW80-116 Albright 125A Single Acting Solenoid Contactor 24V CO is an integral component designed for efficient and reliable power management in various applications, especially where robust and durable electrical switching is crucial. As part of Albright's SW80 series, this model is tailored for single-acting operations, but it operates at a higher voltage and slightly lower current capacity compared to other models within the series. This specificity makes it well-suited for a distinct set of requirements, particularly in 24V systems.
Key Features:
Voltage Rating: The SW80-116 is specifically designed for 24V systems, aligning it with applications that operate within this voltage range, such as certain electric vehicles, industrial equipment, and backup power systems.
Current Capacity: It is rated for 125A continuous current, making it capable of handling significant power loads while ensuring reliable operation in critical situations.
Single Acting (CO) Configuration: The term "CO" stands for "Change Over"; however, in the context of single-acting solenoids like the SW80-116, it typically refers to a device that has one active position when power is applied and returns to its default state when power is removed, facilitated by an internal spring mechanism.
Robustness: The device is built to endure harsh conditions, including high-vibration environments and temperature variations, without compromising performance.
Compact and Versatile: Its compact size combined with high switching capacity makes it versatile for a wide range of applications, from safety cut-offs to power distribution management.
Applications:
Given its specifications, the SW80-116 finds its use in several critical areas:
Industrial Automation: For controlling motors, pumps, and other heavy machinery in manufacturing and processing plants, where 24V control systems are prevalent.
Electric Vehicles (EVs): Suitable for specific types of EVs that utilize a 24V power system, managing the main power supply from the battery to the motor controller efficiently.
Backup Power Systems: In uninterruptible power supply (UPS) systems or emergency power systems where reliable switching between power sources is necessary.
Marine and Offshore: Its robust design ensures reliable operation in marine applications, controlling electrical systems on boats and offshore platforms.
Advantages:
Dependability: Albright's reputation for quality ensures that the SW80-116 is a reliable component for critical switching operations under various conditions.
Installation Ease: The design allows for straightforward integration into existing systems, facilitating quick setup and minimal downtime.
Safety Focused: Ensures a secure electrical connection, minimizing the risk of accidental disconnections or failures, which is paramount in preventing equipment damage or safety hazards.
Conclusion:
The SW80-116 Albright 125A Single Acting Solenoid Contactor 24V CO is a specialized device that serves as a cornerstone in applications requiring reliable, high-capacity electrical switching in 24V systems. Its robustness, versatility, and safety features make it an ideal choice for a broad spectrum of applications, including industrial automation, electric vehicles, backup power systems, and marine applications. By integrating the SW80-116 into their systems, professionals can ensure efficient and reliable operation, meeting the demanding requirements of modern electrical control and power management tasks.
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via the integral bracket formed into the coil housing case. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.
Bracket fits round surfaces
Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.
SW80-2243PE Albright 24V INT Single Pole Single Throw Contactor.
The SW80-753PE, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks.
This one have the bracket fitted vertically to fit better on narrow spaces.
Genuine SW80-278 ALBRIGHT 24V 100A INT DC
The SW80-278, an Albright SW80 -series contactor has been developed for direct current loads, including motors used on different kinds of electric vehicles like industrial trucks.
Genuine SW80-284 Albright 24V Single Pole Single Throw Contactor. The SW80-284, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks as well a
Genuine SW80-357P Albright Contactor. The SW80-357P, a Albright SW80 -series contactor with IP66 protection - P), has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks as well as
SW80-359 is equivalent to SW80-116 found here
Type : SW80-116 Coil Voltage (V) 24 CO DC Coil Resistance (Ohms) 52 Pull In Voltage (V) 16.0 Maximum Drop Out Voltage (V) 6.0 Maximum Coil Power Dissipation (W) 11.08 Additional Features ENCLOSED TOP COVER FITTED. INTEGRAL BRACKET MAG FRAME FITTED All figures above are stated at 20 degrees Celsius
Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.
Genuine SW80-375P Albright Contactor. The SW80-375P, a Albright SW80 -series contactor with IP66 protection - P), has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks as well as
SW80-6 Albright 24V Solenoid Switch. The SW80-6, a Albright SW80 -series contactor has been developed for direct current loads, including motors as used on different kind of electric vehicles like industrial trucks.
