SBS 50 -series Anderson connector
Polycarbonate housings feature 2 positions all finger proof. Genderless design mates with itself. Mechanical keys are color coded.
The patented SBS® connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
This is of particular importance in applications where DC voltages exceed 30 volts and can be health threatening.
Wire-to-wire and wire-to-board configurations both provide power contacts rated up to 110 amps.
The SBS®75X offers up to 4 mate-last break-first auxiliary power / signal contacts rated up to 20 amps.
The SBS®75G features a third first-mate last-break ground or power contact.
All contact positions are rated for circuit interruption (hot plugging).
Touch Safe Interface can safely be used in through panel applications and minimizes potential contact with live circuits per IEC 60950
Wire-to-Wire and Wire-to-Board Configurations Allows one connector to meet multiple needs
Ground or Auxiliary Positions Integrated into the One Piece Housing Meets all connection requirements in one compact connector housing
Complete housing parts set, but does not include voltage coding pin shown in the producut image.All other parts of the housing are included1x Housing for socket2x cable clamp part2x screw for mounting the cable clamp1x lock partREMA OLD CODE: 9560011 / 95600-11 / 95600/11
REMA 102691/75595-55DIN 320 & DIN640 Amp aux cont. for plug
Original REMA auxiliary contact to be installed in 320A plug EURO DIN housing.
informationThis is a single contact pin, normally you need 2 pieces on one plug housing. The contact part of this single contact is the same as on the pilot contacts, which are sold with a plastic adapter and small plastic screw. See the DIN320/DIN640 pilot contact kit here.
REMA DIN 160A Socket with Fixed Handle contacts, lock part, coding pin, and cable stress relief = cable clamp. Including a grey coding pin for the DRY battery.
Product features and advantages:
Specifically designed for the quick and opportunity charging of large battery capacities
Suitable for lead gel accumulators and lithium-ion batteries
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring-supported contact system for optimal contact pressure and high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses and long life
Durable because of acid-resistant design
Suitable for cable sizes from 16 mm2 to 70 mm2
Direct crimping without reducing bushing for all cable size
Wide range of accessories
connect a pair of additional auxiliary and/or a pair of pilot contacts
Coding Pins for different battery types
cooling system with air supply through
Typical applications
forklift trucks
battery charging systems sweeper and cleaning devices
70mm2 currently with 3-4 work days delivery time
Available for 50mm2, 70mm2 and 95mm2 cables
320A PLUG = MALE = STECKER = CHARGER/CAR SIDE50mm2 = 95500-01 DIN 320 A plug; grey coding; acid resistant70mm2 = 95505-01 DIN 320 A plug; grey coding; acid resistant95mm2 = 95510-01 / 108960 DIN 320 A plug; grey coding; acid resistant
REMA DIN 320 Catalog here
Check all DIN 320 connectors here
Sold without a handle, a detachable handle types can be installed and replaced in case the handle breaks. Please see the available accessory for the product. Different types of detachable handles are available as accessories.
PLUG = Male version, for the charger and car/vehicle/EV/motor side
Product features and advantages
Specifically designed for the quick and opportunity charging of large battery capacities.
Suitable for lead gel accumulators and lithium-ion batteries.
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring-supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of acid resistant design
Suitable for cable sizes from 50 mm² to 95 mm² ( smaller doable with 100% fit reducing bushings, look for product page for accessories )
Direct crimping without reducing bushing for all cable size
Wide range of accessories different handle shapes available
1 pair of additional auxiliary and 1 pair of pilot contacts
cooling system with air supply through
Typical applications are forklift trucks battery charging systems sweeper and cleaning devices.
REMA DIN 320A Plug with contacts, lock part, coding pin and cable stress relief = cable clamp. Including grey coding pin for DRY battery.
Other coding pin options are: ( sold separately )
Green = Wet BatteryYellow = Wet&Dry Battery* No handle included, please add separate handle type if needed.* Plug without handle allows the handle to be changed upon damage very easily.
Product features and advantages:
Specifically designed for the quick and opportunity charging of large battery capacities
Suitable for lead gel accumulators and lithium-ion batteries
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of acid resistant design
Suitable for cable sizes 50 mm2, 70mm2 and 95 mm2
Direct crimping without reducing bushing for all cable size
Wide range of accessories
different handle shapes are available
connect a pair of additional auxiliary and/or a pair of pilot contacts
cooling system with air supply through
Typical applications
forklift trucks
battery charging systems sweeper and cleaning devices
RCC devices
Browse all REMA Connectors here
Available for 50mm2, 70mm2 and 95mm2 cables
Standard European version = Black Version, Polyamide Housing (PA)
50mm2 = 75500-01 DIN 320 A socket; grey coding70mm2 = 75505-01 DIN 320 A socket; grey coding95mm2 = 75510-01 DIN 320 A socket; grey coding
REMA DIN 320 Catalog here
Sold without a handle, a detachable handle types can be installed and replaced in case handle breaks. Please see available accessory for the product. Different types of detachable handles are available as accessory.
PLUG = Male version, for the charger and car/vehicle/EV/motor side
Product features and advantages
Specifically designed for the quick and opportunity charging of large battery capacities.
Suitable for lead gel accumulators and lithium-ion batteries.
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of shock resistant housing material
Suitable for cable sizes from 50 mm² to 95 mm² ( smaller doable with 100% fit reducing bushings, look for product page for accessories )
Direct crimping without reducing bushing for all cable size
Wide range of accessories different handle shapes available
Optionally you can mount 1 pair of additional auxiliary and 1 pair of pilot contacts or cooling system with air supply
Typical applications are forklift trucks battery charging systems sweeper and cleaning devices.
REMA DIN 320A Plug with contacts, lock part, coding pin and cable stress relief = cable clamp. Including grey coding pin for DRY battery.
Other coding pin options are: ( sold separately )
Green = Wet BatteryYellow = Wet&Dry Battery* No handle included, please add separate handle type if needed.* Plug without handle allows the handle to be changed upon damage very easily.
Product features and advantages:
Specifically designed for the quick and opportunity charging of large battery capacities
Suitable for lead gel accumulators and lithium-ion batteries
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life.
Durable because of shock resistant housing material
Suitable for cable sizes 50 mm2, 70mm2 and 95 mm2
Direct crimping without reducing bushing for all cable size
Wide range of accessories
different handle shapes are available
connect a pair of additional auxiliary and/or a pair of pilot contacts
cooling system with air supply through
Typical applications
forklift trucks
battery charging systems sweeper and cleaning devices
RCC devices
Browse all REMA Connectors here
Available for 50mm2, 70mm2 and 95mm2 cables
320A SOCKET = FEMALE = DOSE = BATTERY SIDE
50mm2 = 95601-01 DIN 320 A socket; grey coding; acid resistant70mm2 = 95605-01 DIN 320 A socket; grey coding; acid resistant95mm2 = 95610-01 DIN 320 A socket; grey coding; acid resistant
This product includes a complete connector with housing, locking part, cable stress relief, grey coding pin, and main contacts. As an accessory, you can pick also the handle and auxiliary and pilot contacts or/and the air adapter.
If you look for the opposite side of this connector, please find the plug-version here.
Sold without a handle, a detachable handle types can be installed and replaced in case handle breaks. Please see available accessory for the product. Different types of detachable handles are available as accessory.
SOCKET = Female version, for the battery side
Product features and advantages
Specifically designed for the quick and opportunity charging of large battery capacities.
Suitable for lead gel accumulators and lithium-ion batteries.
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of acid resistant design
Suitable for cable sizes from 50 mm² to 95 mm² ( smaller doable with 100% fit reducing bushings, look for product page for accessories )
Direct crimping without reducing bushing for all cable size
Wide range of accessories different handle shapes available
1 pair of additional auxiliary and 1 pair of pilot contacts
cooling system with air supply through
Typical applications are forklift trucks battery charging systems sweeper and cleaning devices.
REMA DIN 320A Plug with contacts, lock part, coding pin and cable stress relief = cable clamp. Including grey coding pin for DRY battery.
Other coding pin options are: ( sold separately )
Green = Wet BatteryYellow = Wet&Dry Battery* No handle included, please add separate handle type if needed.* Plug without handle allows the handle to be changed upon damage very easily.
Product features and advantages:
Specifically designed for the quick and opportunity charging of large battery capacities
Suitable for lead gel accumulators and lithium-ion batteries
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of acid resistant design
Suitable for cable sizes 50 mm2, 70mm2 and 95 mm2
Direct crimping without reducing bushing for all cable size
Wide range of accessories
different handle shapes are available
connect a pair of additional auxiliary and/or a pair of pilot contacts
cooling system with air supply through
Typical applications
forklift trucks
battery charging systems sweeper and cleaning devices
RCC devices
Browse all REMA Connectors here
Available for 50mm2, 70mm2 and 95mm2 cables
Standard European Version, Black, Polyamide housing (PA)
50mm2 = 7560101 DIN 320 A socket; grey coding70mm2 = 7560501 DIN 320 A socket; grey coding95mm2 = 7561001 DIN 320 A socket; grey coding
Sold without a handle, detachable handle types can be installed and replaced in case handle breaks. Please see available accessory for the product. Different types of detachable handles are available as accessory.
SOCKET = Female version, for the battery side
Product features and advantages
Specifically designed for the quick and opportunity charging of large battery capacities.
Suitable for lead gel accumulators and lithium-ion batteries.
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of shock resistant housing materialSuitable for cable sizes from 50 mm² to 95 mm² ( smaller doable with 100% fit reducing bushings, look for product page for accessories )
Direct crimping without reducing bushing for all cable size
Wide range of accessories different handle shapes available
Optionally you can fit with 1 pair of additional auxiliary and 1 pair of pilot contacts and cooling system with air supply through
Typical applications are forklift trucks battery charging systems sweeper and cleaning devices.
REMA DIN 320A Plug with contacts, lock part, coding pin and cable stress relief = cable clamp. Including grey coding pin for DRY battery.
Other coding pin options are: ( sold separately )
Green = Wet BatteryYellow = Wet&Dry Battery* No handle included, please add separate handle type if needed.* Plug without handle allows the handle to be changed upon damage very easily.
Product features and advantages:
Specifically designed for the quick and opportunity charging of large battery capacities
Suitable for lead gel accumulators and lithium-ion batteries
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of shock resistant housing material
Suitable for cable sizes 50 mm2, 70mm2 and 95 mm2
Direct crimping without reducing bushing for all cable size
Wide range of accessories
different handle shapes are available
connect a pair of additional auxiliary and/or a pair of pilot contacts
cooling system with air supply through
Typical applications
forklift trucks
battery charging systems sweeper and cleaning devices
RCC devices
Browse all REMA Connectors here
REMA DIN 80A Plug with contacts, lock part, coding pin and cable stress relief = cable clamp. Including grey coding pin for DRY battery.
Other options are
Green = Wet BatteryYellow = Wet&Dry Battery
Available with 6mm2, 10mm2, 16mm2, 25mm2 and 35mm2 contacts
Browse more REMA DIN 80 connectors here
Item description
contacts (mm2 & AWG)
New Rema Code
Old Rema Code
DIN 80 plug set, acid resistant
6mm2fits AWG 10/12
108892
95198-06
DIN 80 A plug; grey coding; acid resistant
10mm2 fits AWG 8
111077
95198-10
DIN 80 A plug; grey coding; acid resistant
16mm2 fits AWG 6
108891
95198-00
DIN 80 A plug; grey coding; acid resistant
25mm2 fits AWG 4
108894
95199-00
DIN 80 A plug; grey coding; acid resistant
35mm2 Fits AWG 2
108895
95199-10
* No handle included, please add separate handle type if needed.* Plug without handle allows the handle to be changed upon damage very easily.
Product features and advantages:
Specifically designed for the quick and opportunity charging of large battery capacities
Suitable for lead gel accumulators and lithium-ion batteries
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of acid resistant design
Suitable for cable sizes from 10 mm2 to 35 mm2
Direct crimping without reducing bushing for all cable size
Wide range of accessories
different handle shapes are available
connect a pair of additional auxiliary and/or a pair of pilot contacts
cooling system with air supply through
Typical applications
forklift trucks
battery charging systems sweeper and cleaning devices
REMA DIN 80A Socket with contacts, lock part, coding pin and cable stress relief = cable clamp. Including grey coding pin for DRY battery.
Other options for coding pins are: (sold separately)
Green = Wet BatteryYellow = Wet&Dry Battery* No handle included, please add separate handle type if needed.* Socket without handle allows the handle to be changed upon damage very easily.
Product features and advantages:
Specifically designed for the quick and opportunity charging of large battery capacities
Suitable for lead gel accumulators and lithium-ion batteries
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of acid resistant design
Suitable for cable sizes from 16 mm2 to 35 mm2
Direct crimping without reducing bushing for all cable size
Wide range of accessories
different handle shapes are available
connect a pair of additional auxiliary and/or a pair of pilot contacts
cooling system with air supply through
Typical applications
forklift truck batteries
battery charging systems sweeper and cleaning device batteries
REMA DIN 80A Socket with a fixed handle, with contacts, lock part, coding pin and cable stress relief = cable clamp. Including grey coding pin for DRY battery.
Other options for coding pin are (sold separately):
Green = Wet BatteryYellow = Wet&Dry Battery* No handle included, please add separate handle type if needed.* Socket without handle allows the handle to be changed upon damage very easily.
Product features and advantages:
Specifically designed for the quick and opportunity charging of large battery capacities
Suitable for lead gel accumulators and lithium-ion batteries
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of acid resistant design
Suitable for cable sizes from 16 mm2 to 35 mm2
Direct crimping without reducing bushing for all cable size
Wide range of accessories
different handle shapes are available
connect a pair of additional auxiliary and/or a pair of pilot contacts
cooling system with air supply through
Typical applications
forklift truck batteries
battery charging systems sweeper and cleaning device batteries
REMA DIN 160A Plug with contacts, Acid Resistant Housing, lock part, coding pin and cable stress relief = cable clamp. Including grey coding pin for DRY battery.
Other options are: ( sold separately )
Green = Wet BatteryYellow = Wet&Dry Battery
REMA 160A Plug Acid Resistant Catalog codes (new / old) below:
10mm2 = 108846 / 95029-10 ( fits also AWG 8 )
16mm2 = 108845 / 95029-01 ( fits also AWG 6 )
25mm2 = 108851 / 95034-01 ( fits also AWG 4 )
35mm2 = 108858 / 95039-01 ( fits also AWG 2 )
50mm2 = 108856 / 95044-01 ( fits also AWG 1/0 )
70mm2 = 108868 / 95044-04 ( fits also AWG 2/0 )
* No handle included, please add separate handle type if needed.* Plug without handle allows the handle to be changed upon damage very easily.
Product features and advantages:
Specifically designed for the quick and opportunity charging of large battery capacities
Suitable for lead gel accumulators and lithium-ion batteries
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of acid resistant design
Suitable for cable sizes from 10 mm2 to 50 mm2
Direct crimping without reducing bushing for all cable size
Wide range of accessories
different handle shapes are available
connect a pair of additional auxiliary and/or a pair of pilot contacts
cooling system with air supply through
Typical applications
forklift trucks
battery charging systems sweeper and cleaning devices
70mm2 currently with 3-4 work days delivery time
REMA DIN 160A Plug with contacts, lock part, coding pin and cable stress relief = cable clamp. Including grey coding pin for DRY battery.
Other coding pin options are: ( sold separately )
Green = Wet BatteryYellow = Wet&Dry Battery
Catalog codes are:
16mm2 = 108807 ( fits AWG 6 )
25mm2 = 108813 / old 95007-08 ( fits AWG 4 )
35mm2 = 108819 / old 95012-08 ( fits AWG 2 )
50mm2 = 108831/ old 95017-08 ( fits AWG 1/0 )
70mm2 = 108832 ( fits AWG 2/0 )
* No handle included, please add separate handle type if needed.* Plug without handle allows the handle to be changed upon damage very easily.
Product features and advantages:
Specifically designed for the quick and opportunity charging of large battery capacities
Suitable for lead gel accumulators and lithium-ion batteries
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of acid resistant design
Suitable for cable sizes from 10 mm2 to 50 mm2
Direct crimping without reducing bushing for all cable size
Wide range of accessories
different handle shapes are available
connect a pair of additional auxiliary and/or a pair of pilot contacts
cooling system with air supply through
Typical applications
forklift trucks
battery charging systems sweeper and cleaning devices
REMA DIN 160A Plug with contacts, lock part, coding pin and cable stress relief = cable clamp. Including grey coding pin for DRY battery.
Other coding pin options are: ( sold separately )
Green = Wet BatteryYellow = Wet&Dry Battery* No handle included, please add separate handle type if needed.* Plug without handle allows the handle to be changed upon damage very easily.
Product features and advantages:
Specifically designed for the quick and opportunity charging of large battery capacities
Suitable for lead gel accumulators and lithium-ion batteries
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Suitable for cable sizes from 10 mm2 to 50 mm2
Direct crimping without reducing bushing for all cable size
Wide range of accessories
different handle shapes are available
connect a pair of additional auxiliary and/or a pair of pilot contacts
cooling system with air supply through
Typical applications
forklift trucks
battery charging systems sweeper and cleaning devices
REMA DIN 80A Plug RED, with contacts, lock part, coding pin and cable stress relief = cable clamp.* No handle included, please add separate handle type if needed.* Plug without handle allows the handle to be changed upon damage very easily.
![Housing SBX 350 - grey [MPN: 6350-BK] - OEM NORDIC - Quality Parts Distribution](//mkcontrols.eu/cdn/shop/files/7976BD59-A73B-4C52-81F2-0468F6799EBD.jpg?v=1773426773&width=645)
![Housing SBX 350 - grey [MPN: 6350-BK] - OEM NORDIC - Quality Parts Distribution](http://mkcontrols.eu/cdn/shop/files/7976BD59-A73B-4C52-81F2-0468F6799EBD.jpg?v=1773426773&width=645)
