Complete housing parts set, but does not include voltage coding pin shown in the producut image.All other parts of the housing are included1x Housing for socket2x cable clamp part2x screw for mounting the cable clamp1x lock partREMA OLD CODE: 9560011 / 95600-11 / 95600/11
REMA 102691/75595-55DIN 320 & DIN640 Amp aux cont. for plug
Original REMA auxiliary contact to be installed in 320A plug EURO DIN housing.
informationThis is a single contact pin, normally you need 2 pieces on one plug housing. The contact part of this single contact is the same as on the pilot contacts, which are sold with a plastic adapter and small plastic screw. See the DIN320/DIN640 pilot contact kit here.
Available for 50mm2, 70mm2 and 95mm2 cables
320A PLUG = MALE = STECKER = CHARGER/CAR SIDE50mm2 = 95500-01 DIN 320 A plug; grey coding; acid resistant70mm2 = 95505-01 DIN 320 A plug; grey coding; acid resistant95mm2 = 95510-01 / 108960 DIN 320 A plug; grey coding; acid resistant
REMA DIN 320 Catalog here
Check all DIN 320 connectors here
Sold without a handle, a detachable handle types can be installed and replaced in case the handle breaks. Please see the available accessory for the product. Different types of detachable handles are available as accessories.
PLUG = Male version, for the charger and car/vehicle/EV/motor side
Product features and advantages
Specifically designed for the quick and opportunity charging of large battery capacities.
Suitable for lead gel accumulators and lithium-ion batteries.
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring-supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of acid resistant design
Suitable for cable sizes from 50 mm² to 95 mm² ( smaller doable with 100% fit reducing bushings, look for product page for accessories )
Direct crimping without reducing bushing for all cable size
Wide range of accessories different handle shapes available
1 pair of additional auxiliary and 1 pair of pilot contacts
cooling system with air supply through
Typical applications are forklift trucks battery charging systems sweeper and cleaning devices.
REMA DIN 320A Plug with contacts, lock part, coding pin and cable stress relief = cable clamp. Including grey coding pin for DRY battery.
Other coding pin options are: ( sold separately )
Green = Wet BatteryYellow = Wet&Dry Battery* No handle included, please add separate handle type if needed.* Plug without handle allows the handle to be changed upon damage very easily.
Product features and advantages:
Specifically designed for the quick and opportunity charging of large battery capacities
Suitable for lead gel accumulators and lithium-ion batteries
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of acid resistant design
Suitable for cable sizes 50 mm2, 70mm2 and 95 mm2
Direct crimping without reducing bushing for all cable size
Wide range of accessories
different handle shapes are available
connect a pair of additional auxiliary and/or a pair of pilot contacts
cooling system with air supply through
Typical applications
forklift trucks
battery charging systems sweeper and cleaning devices
RCC devices
Browse all REMA Connectors here
Available for 50mm2, 70mm2 and 95mm2 cables
Standard European version = Black Version, Polyamide Housing (PA)
50mm2 = 75500-01 DIN 320 A socket; grey coding70mm2 = 75505-01 DIN 320 A socket; grey coding95mm2 = 75510-01 DIN 320 A socket; grey coding
REMA DIN 320 Catalog here
Sold without a handle, a detachable handle types can be installed and replaced in case handle breaks. Please see available accessory for the product. Different types of detachable handles are available as accessory.
PLUG = Male version, for the charger and car/vehicle/EV/motor side
Product features and advantages
Specifically designed for the quick and opportunity charging of large battery capacities.
Suitable for lead gel accumulators and lithium-ion batteries.
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of shock resistant housing material
Suitable for cable sizes from 50 mm² to 95 mm² ( smaller doable with 100% fit reducing bushings, look for product page for accessories )
Direct crimping without reducing bushing for all cable size
Wide range of accessories different handle shapes available
Optionally you can mount 1 pair of additional auxiliary and 1 pair of pilot contacts or cooling system with air supply
Typical applications are forklift trucks battery charging systems sweeper and cleaning devices.
REMA DIN 320A Plug with contacts, lock part, coding pin and cable stress relief = cable clamp. Including grey coding pin for DRY battery.
Other coding pin options are: ( sold separately )
Green = Wet BatteryYellow = Wet&Dry Battery* No handle included, please add separate handle type if needed.* Plug without handle allows the handle to be changed upon damage very easily.
Product features and advantages:
Specifically designed for the quick and opportunity charging of large battery capacities
Suitable for lead gel accumulators and lithium-ion batteries
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life.
Durable because of shock resistant housing material
Suitable for cable sizes 50 mm2, 70mm2 and 95 mm2
Direct crimping without reducing bushing for all cable size
Wide range of accessories
different handle shapes are available
connect a pair of additional auxiliary and/or a pair of pilot contacts
cooling system with air supply through
Typical applications
forklift trucks
battery charging systems sweeper and cleaning devices
RCC devices
Browse all REMA Connectors here
Available for 50mm2, 70mm2 and 95mm2 cables
320A SOCKET = FEMALE = DOSE = BATTERY SIDE
50mm2 = 95601-01 DIN 320 A socket; grey coding; acid resistant70mm2 = 95605-01 DIN 320 A socket; grey coding; acid resistant95mm2 = 95610-01 DIN 320 A socket; grey coding; acid resistant
This product includes a complete connector with housing, locking part, cable stress relief, grey coding pin, and main contacts. As an accessory, you can pick also the handle and auxiliary and pilot contacts or/and the air adapter.
If you look for the opposite side of this connector, please find the plug-version here.
Sold without a handle, a detachable handle types can be installed and replaced in case handle breaks. Please see available accessory for the product. Different types of detachable handles are available as accessory.
SOCKET = Female version, for the battery side
Product features and advantages
Specifically designed for the quick and opportunity charging of large battery capacities.
Suitable for lead gel accumulators and lithium-ion batteries.
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of acid resistant design
Suitable for cable sizes from 50 mm² to 95 mm² ( smaller doable with 100% fit reducing bushings, look for product page for accessories )
Direct crimping without reducing bushing for all cable size
Wide range of accessories different handle shapes available
1 pair of additional auxiliary and 1 pair of pilot contacts
cooling system with air supply through
Typical applications are forklift trucks battery charging systems sweeper and cleaning devices.
REMA DIN 320A Plug with contacts, lock part, coding pin and cable stress relief = cable clamp. Including grey coding pin for DRY battery.
Other coding pin options are: ( sold separately )
Green = Wet BatteryYellow = Wet&Dry Battery* No handle included, please add separate handle type if needed.* Plug without handle allows the handle to be changed upon damage very easily.
Product features and advantages:
Specifically designed for the quick and opportunity charging of large battery capacities
Suitable for lead gel accumulators and lithium-ion batteries
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of acid resistant design
Suitable for cable sizes 50 mm2, 70mm2 and 95 mm2
Direct crimping without reducing bushing for all cable size
Wide range of accessories
different handle shapes are available
connect a pair of additional auxiliary and/or a pair of pilot contacts
cooling system with air supply through
Typical applications
forklift trucks
battery charging systems sweeper and cleaning devices
RCC devices
Browse all REMA Connectors here
Available for 50mm2, 70mm2 and 95mm2 cables
Standard European Version, Black, Polyamide housing (PA)
50mm2 = 7560101 DIN 320 A socket; grey coding70mm2 = 7560501 DIN 320 A socket; grey coding95mm2 = 7561001 DIN 320 A socket; grey coding
Sold without a handle, detachable handle types can be installed and replaced in case handle breaks. Please see available accessory for the product. Different types of detachable handles are available as accessory.
SOCKET = Female version, for the battery side
Product features and advantages
Specifically designed for the quick and opportunity charging of large battery capacities.
Suitable for lead gel accumulators and lithium-ion batteries.
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of shock resistant housing materialSuitable for cable sizes from 50 mm² to 95 mm² ( smaller doable with 100% fit reducing bushings, look for product page for accessories )
Direct crimping without reducing bushing for all cable size
Wide range of accessories different handle shapes available
Optionally you can fit with 1 pair of additional auxiliary and 1 pair of pilot contacts and cooling system with air supply through
Typical applications are forklift trucks battery charging systems sweeper and cleaning devices.
REMA DIN 320A Plug with contacts, lock part, coding pin and cable stress relief = cable clamp. Including grey coding pin for DRY battery.
Other coding pin options are: ( sold separately )
Green = Wet BatteryYellow = Wet&Dry Battery* No handle included, please add separate handle type if needed.* Plug without handle allows the handle to be changed upon damage very easily.
Product features and advantages:
Specifically designed for the quick and opportunity charging of large battery capacities
Suitable for lead gel accumulators and lithium-ion batteries
Corresponds to the DIN VDE 0632-589 and EN 1175-1
Spring supported contact system for optimal contact pressure high electrical conductivity
High-grade contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating ensure power transition with minimal losses long life
Durable because of shock resistant housing material
Suitable for cable sizes 50 mm2, 70mm2 and 95 mm2
Direct crimping without reducing bushing for all cable size
Wide range of accessories
different handle shapes are available
connect a pair of additional auxiliary and/or a pair of pilot contacts
cooling system with air supply through
Typical applications
forklift trucks
battery charging systems sweeper and cleaning devices
RCC devices
Browse all REMA Connectors here
REMA 95500-01
Original REMA EURO DIN 320A / 50 mm² plug with grey coding, battery acid resistant 108952 / 9550001 are the REMA catalog numbers for the item indicated as (new catalog nr/old catalog nr).
95500-01 includes these parts:
1x housing, 1x lock part, 1x coding pin (grey), 1x cable clamp set
2x main contacts 50 mm², plug side
This is a Complete connector set with battery acid-resistant housing.
Extra accessories are available, such as extra auxiliary and pilot contact sets, handles, air pipes.
Housing material – IMPORTANT CLARIFICATION
🔹 This is the Battery Acid Resistant, Dark Grey housing version
Material: PP CoPo GF30 (copolymer polypropylene)
Battery acid-resistant
UL-tested version
Recommended for demanding battery and traction applications
👉 Only the housing material differs between the black and dark grey versions. All electrical and mechanical connector parts are identical.
** As an alternative, a complete black housing version is available under part number 75500-01 which features a fully black housing made from shock-resistant polyamide (PA), offering increased mechanical strength and improved impact resistance.Only the housing material is different between these two versions and to note the dark-grey version is the one the UL -tests are made with.
REMA 95505-01 for DIN320 70mm² - Plug
Original REMA EURO DIN 320A / 70 mm² plug with grey coding, acid-resistant 108957 / 9550501 are the REMA catalog numbers for the item indicated as (new catalog nr/old catalog nr)
95505-01 includes these parts:
1x housing, 1x lock part, 1x coding pin (grey), 1x cable clamp set
2x main contacts 70 mm², plug side
This is a Complete connector set with battery acid-resistant housing.
Extra accessories are available, such as extra auxiliary and pilot contact sets, handles, air pipes.
Housing material – IMPORTANT CLARIFICATION
🔹 This is the Battery Acid Resistant, Dark Grey housing version
Material: PP CoPo GF30 (copolymer polypropylene)
Battery acid-resistant
UL-tested version
Recommended for demanding battery and traction applications
👉 Only the housing material differs between the black and dark grey versions. All electrical and mechanical connector parts are identical.
** As an alternative, a complete black housing version is available under part number 75500-01 which features a fully black housing made from shock-resistant polyamide (PA), offering increased mechanical strength and improved impact resistance.Only the housing material is different between these two versions and to note the dark-grey version is the one the UL -tests are made with.
REMA 95510-01 for DIN320 95mm² - Plug
Original REMA EURO DIN 320A / 95 mm² plug with grey coding, acid resistant 108960 / 9551001 are the REMA catalog numbers for the item indicated as (new catalog nr/old catalog nr)
Original / Genuine REMA Euro DIN 320 amp battery connector plug set (male)
Includes main contacts and housing, lock part, coding pin, cable clamp
This is a Complete connector set
Accessories are available, such as auxiliary contacts, pilot contact sets, handles, air pipes but are not included in the basic connector set.
Housing material – IMPORTANT CLARIFICATION
🔹 This is the Battery Acid Resistant, Dark Grey housing version
Material: PP CoPo GF30 (copolymer polypropylene)
Battery acid-resistant
UL-tested version
Recommended for demanding battery and traction applications
👉 Only the housing material differs between the black and dark grey versions. All electrical and mechanical connector parts are identical.
** As an alternative, a complete black housing version is available under part number 75510-01 which features a fully black housing made from shock-resistant polyamide (PA), offering increased mechanical strength and improved impact resistance.Only the housing material is different between these two versions and to note the dark-grey version is the one the UL -tests are made with.
REMA 95515-01 for DIN320 50mm² - Plug with Aux.
Original REMA EURO DIN 320A / 50 mm² plug with grey coding, acid resistant 9551501
Includes main contacts and housing, lock part, coding pin, cable clamp + auxiliary contact pair (2 single aux contacs)
This is a Complete connector set
Battery Acid Resistant
Housing material – IMPORTANT CLARIFICATION
🔹 This is the Battery Acid Resistant, Dark Grey housing version
Material: PP CoPo GF30 (copolymer polypropylene)
Battery acid-resistant
UL-tested version
Recommended for demanding battery and traction applications
👉 Only the housing material differs between the black and dark grey versions. All electrical and mechanical connector parts are identical.
** As an alternative, a complete black housing version is available under part number 75515-01 which features a fully black housing made from shock-resistant polyamide (PA), offering increased mechanical strength and improved impact resistance.Only the housing material is different between these two versions and to note the dark-grey version is the one the UL -tests are made with.
REMA 95601-01
Original REMA EURO DIN 320A / 50 mm² socket with grey coding, acid resistant 108972 / 9560101 are the REMA catalog numbers for the item indicated as (new catalog nr/old catalog nr)
95601-01 includes these parts:
1x housing, 1x lock part, 1x coding pin (grey), 1x cable clamp set
2x main contacts 50 mm², socket side (the battery side)
This is a Complete connector set with battery acid-resistant housing.
Extra accessories are available, such as extra auxiliary and pilot contact sets, handles, air pipes.
Housing material – IMPORTANT CLARIFICATION
🔹 This is the Battery Acid Resistant, Dark Grey housing version
Material: PP CoPo GF30 (copolymer polypropylene)
Battery acid-resistant
UL-tested version
Recommended for demanding battery and traction applications
👉 Only the housing material differs between the black and dark grey versions. All electrical and mechanical connector parts are identical.
** As an alternative, a complete black housing version is available under part number 75601-01 which features a fully black housing made from shock-resistant polyamide (PA), offering increased mechanical strength and improved impact resistance.Only the housing material is different between these two versions and to note the dark-grey version is the one the UL -tests are made with.
REMA 95605-01
Original REMA EURO DIN 320A / 50 mm² socket with grey coding, acid resistant 108975 / 9560501 are the REMA catalog numbers for the item indicated as (new catalog nr/old catalog nr)
95605-01 includes these parts:
1x housing, 1x lock part, 1x coding pin (grey), 1x cable clamp set
2x main contacts 70 mm², socket side (the battery side)
This is a Complete connector set with battery acid-resistant housing.
Extra accessories are available, such as extra auxiliary and pilot contact sets, handles, air pipes.
Housing material – IMPORTANT CLARIFICATION
🔹 This is the Battery Acid Resistant, Dark Grey housing version
Material: PP CoPo GF30 (copolymer polypropylene)
Battery acid-resistant
UL-tested version
Recommended for demanding battery and traction applications
👉 Only the housing material differs between the black and dark grey versions. All electrical and mechanical connector parts are identical.
** As an alternative, a complete black housing version is available under part number 75601-01 which features a fully black housing made from shock-resistant polyamide (PA), offering increased mechanical strength and improved impact resistance.Only the housing material is different between these two versions and to note the dark-grey version is the one the UL -tests are made with.
New Catalog no.
Old Catalog no.
Description
108739
7556001
DIN 320 A main contact 50 qmm for plug (1 pc.)
108743
7556501
DIN 320 A main contact 70 qmm for plug (1 pc.)
111105
7557001
DIN 320 A main contact 95 qmm for plug (1 pc.)
REMA DIN 320 spare contact (1pc) / single main contact: you need 2 pieces per one Socket.
New Catalog no.
Old Catalog no.
Description
108772
7566001
DIN 320 A main contact 50 qmm for socket (1 pc.)
108775
7566501
DIN 320 A main contact 70 qmm for socket (1 pc.)
108780
7567001
DIN 320 A main contact 95 qmm for socket (1 pc.)
Standard DIN Connector spare handle with slightly bent handle form. Battery acid proof handle, made of PolyPropylene.
Includes screws for both 160A and 320A housing types.
