ABS/EBS coil with ISO 7638-1 plugs.▪ 3m working length
Weight: 1.55 kg
ADR certified according to ISO 4141 and ISO 4091
High pull-out forces by strain relief inside
Connection
input:
Plug ABS/EBS 7-pin 24V ISO
7638-1
Connection output:
Plug ABS/EBS 7-pin 24V ISO 7638-1
Cable length:
3m working length (Cable Style: 2x4+3x1,5+1x(2x1,5)mm² PUR)
Mass:
1.55 kg
TRAILER CONVERTER 7-13 ABW 24-12C6
Converter to supply a 12V trailer from a 24V vehicle system as short adapter 7 pin to 13 pin, the reversing lights are not connected. Incandescent lamps and suitable RMS compatible LEDs can be operated. Please ask the LED lamp manufacturer for RMS compatibility. For further details please see our handout “LED lamps in RMS operation”.
▪ IN: 24V / OUT: 12V▪ Input: 24V plug with 7 contacts▪ Output: 12V socket with 13 contacts
Weight: 0.32 kg
simply plug in between
fulfills the law requirement for fail-safe by 100% separated lines
compatible with lamp control circuits
correct function of ABS-info-module is guaranteed
internal short circuit and overload protection, one each line
power reserves in case of additional lamps at the trailer
European approval E1 10R-046957
Input voltage:
24V DC nominal (18 ... 33V)
Output voltage:
RMS power equation for 12V (9 ... 15.5V)
Output power:
6 x 70W total max 220W lamp power
Connection input:
Plug with 7 contacts 24V ISO'1185
Connection output:
flanged socket with flap cover 13 contacts 12V ISO'11446
Cable length input:
_
Cable length output:
_
Current without load:
0mA at the open output (no current)
Efficiency:
app. 97%
Temperature range:
-40 ... +75°C
Electrical protection:
overcurrent (auto reset), over temperature (auto reset)
Mechanical protection:
overload current (self-resetting) overtemperature (self-resetting)
Mechanical protection:
electronic sealed
Dimensions:
D x L ca 75mm x 190mm with closed cover
Mass:
app. 320g
Restrictions:
the control lamp of ancient mechanical flashing units is not indicating. Use ABW 24-12-6H
Attention:
for bulbs and RMS - LEDs only!
ABS/EBS coil with ISO 7638-2 plugs.
▪ 3m working length
Weight: 1.55 kg
ADR certified according to ISO 4141 and ISO 4091
High pull-out forces by strain relief inside
Connection input:
Plug ABS/EBS 7-pin 12V ISO 7638-2
Connection output:
Plug ABS/EBS 7-pin 12V ISO 7638-2
Cable length:
3m working length (Cable Style: 2x4+3x1,5+1x(2x1,5)mm² PUR)
Mass:
1.55 kg
Cable for the connection of the lights converter mounted in the TCU-FT-DD unit.▪ length 3.1m\n\n \n \n \n Weight: 0.74 kg\n \n
\n
The connection between the 12V light socket and TCU-FT-DD unit
Higher cross-section prevents high voltage drops
Short cable ideal for using the TCU-FT-DD unit mounted at the tractor or trailer.
\n \n
\n Connection\n input:\n Plug 7 pin DIN/ISO 1724\n \n \n Connection output:\n Plug 7 pin DIN/ISO 1724\n \n \n Cable length:\n 3.1m (Cable Style: 6x1,5+1x2,5mm² PUR)\n \n \n Mass:\n 0.32 kg\n \n
Cable for the connection of the converters ABS 12-24DT, -DTM, -PS, -PSM with a 3 pin tractor universal socket according to DIN 9680.***Attention!*** Legal maximum speed 40km/h! Please follow the regulations of your country.'
▪ up to max. 40km/h applicable!▪ length 4m
Supplies the EBS of a trailer when subsequently limited to 40km/h
For the supply of any ABS 12-24xx converter with a 12V ISO 7638-2 input socket
No ABS upgrade of 40km/h tractors required
Connection\n input:
Plug 3 Pin DIN 9680
Connection output:
Plug ABS 5 pin ISO 7638-2
Cable length:
4m (Cable Style: 2x4+3x1,5mm² PUR (1x1,5mm² not in use))
Mass:
1.05 kg
Cable for the connection of the ABS part of the unit TCU-FT as well as the converters ABS12-24SC and ABS12-24SCM with a 3 pin tractor universal\n socket according to DIN 9680. Version with ABS socket. ***Attention!*** Legal maximum speed 40km/h! Please follow the regulations of your country.▪ up to max. 40km/h applicable!▪ length 2m\n
Supplies the EBS of a trailer when subsequently limited to 40km/h
For the supply of any ABS 12-24xx converter with a 12V ISO 7638-2 input plug
No ABS upgrade of 40km/h tractors required
\n \n
\n Connection\n input:\n Plug 3 Pin DIN 9680\n \n \n Connection output:\n Socket ABS 5 pin ISO 7638-2\n \n \n Cable length:\n 2m (Cable Style: 2x4+3x1,5mm² PU (1x1,5mm² not in use))\n \n \n Mass:\n 0,65 kg
Converter for charging a 12V lead-accumulator within a 24V car line 26(35)A-▪ IN: 24V / OUT: 12V ▪ Connection: open cable end\n\n \n \n \n Weight: 0.93 kg\n \n
\n
in case of charging the 24V battery has priority
the charging process starts at a voltage of more than 26.4V and stops at less than 25.0V
to avoid a flattering of the circuit, the on/off hysteresis is time-delayed
Attention: at input voltages, less than 26.4V the converter is out of work as directed!
\n \n
\n Input\n voltage:\n 16 ... 30V DC\n \n \n Output voltage:\n half input voltage at input >26.4V\n \n \n Output current:\n 26A permanent, 35A for about 5 min.\n \n \n Connection:\n 3-pole plug "Anderson Powerpole Modular"\n \n \n Power-on-voltage:\n 26.4V\n \n \n Power-off-voltage:\n 25.0V\n \n \n Cable length:\n app. 180mm\n \n \n Current without load:\n 0.7mA at 24V\n \n \n Efficiency:\n app. 92%\n \n \n Temperature range:\n -40 ... +75°C, derating T>45°C\n \n \n Electrical protection:\n overcurrent, overtemperature, input transients\n \n \n Mechanical protection:\n entirely sealed\n \n \n Dimensions:\n 200 x 70 x 40mm\n \n \n Mass:\n app. 930g\n \n \n Time-delay:\n app. 5 sec.\n \n
Special converter for the supply of 24V anti-lock system out of 12V or 24V. Input and output cables are cast solid, open ends.
▪ IN: 12V ... 24V / OUT: 24V▪ Input: open cable end▪ Output: open cable end
Weight: 1.04 kg
input voltage 12V and 24V
high power for additional functions like EBS and level control
compact size by high efficiency
simple mounting by inserting into cable line (5-pole cable)
info-module works properly
electronic protection against reverse polarity without short circuit
protection against overload
reverse voltage proof independent from polarity
Input\n voltage:
9 ... 33V DC both lines
Output voltage:
27V +-5% (27 ... 32V if input above 27V)
Output current line (term.\n 30):
0 ... 10A (15A /20% on time cycle)
Output current line (term.\n 15):
0 ... 500mA
Connection input:
ABS / EBS socket 12V ISO'7638
Connection output:
ABS / EBS plug 24V ISO'7638
Cable length input:
app. 450mm
Cable length output:
app. 600mm
Efficiency:
ca. 80%
Mechanical protection:
entirely sealed
Dimensions:
200 x 70 x 40mm without cable outlet
Mass:
app. 950g
\n Special converter for the supply of a 24V anti-lock system ABS/EBS out of 12V or 24V. The converter is equipped with \nABS/EBS bayonet connectors. For inserting into the trailer cable. The \ncontacts 6 and 7 ("CAN-Bus") are connected through.
Attention! The can bus lines require a separate level shifter. Without a level shifter, the brake operates correctly on the ABS level.
▪ IN: 12V ... 24V / OUT: 24V ▪ Input: Bayonet female connector▪ Output: Bayonet male connector\n\n \n \n \n Weight: 1.2 kg\n \n
\n
input voltage 12V and 24V
high power for additional functions like EBS and level control
only insert into the ABS/EBS cable at the bayonet connection
electronic protection against reverse polarity without short circuit
protection against overload
reverse voltage proof independent from polarity
very fast done and water protected mounting without additional measures
the function of the info module remains active
compact size by high efficiency
\n \n
\n Input\n voltage:\n 9 ... 33V DC both lines\n \n \n Output voltage:\n 27V +-5% (27 ... 32V if input above 27V)\n \n \n Output current line (term.\n 30):\n 0 ... 10A (15A /20% on time cycle)\n \n \n Output current line (term.\n 15):\n 0 ... 500mA\n \n \n Connection input:\n Bayonet female connector with lock shell, 7 pins automotive\n standard\n \n \n Connection output:\n Bayonet male connector, 7 pins automotive standard\n \n \n Cable length input:\n _\n \n \n Cable length output:\n _\n \n \n Efficiency:\n app. 80%\n \n \n Electrical protection:\n _\n \n \n Mechanical protection:\n entirely sealed\n \n \n Dimensions:\n 200 x 70 x 40mm without cable outlet\n \n \n Mass:\n app.1200g\n \n
\n Special converter for the supply of a 24V anti-lock system ABS/EBS out of 12V or 24V. The converter is equipped with \nABS/EBS bayonet connectors. For inserting into the trailer cable. Male \ninput / female output (Reverse configuration). The contacts 6 and 7 \n("CAN-Bus") are connected through.
Attention! The can bus lines require a separate level shifter. Without a level shifter, the brake operates correctly on the ABS level.
▪ IN: 12V ... 24V / OUT: 24V▪ Input: Bayonet male connector▪ Output: Bayonet female connector\n \n\n \n \n\n \n \n \n Weight: 1.2 kg\n \n
\n
very fast done and water protected mounting without additional measures
simply insert into the ABS/EBS cable at the bayonet connection (Reverse configuration)
input voltage 12V and 24V
high power for additional functions like EBS and level control
the function of the info module remains active
electronic protection against reverse polarity without short circuit
protection against overload
reverse voltage proof independent from polarity
compact size by high efficiency
\n \n
\n Input\n voltage:\n 9 ... 33V DC both lines\n \n \n Output voltage:\n 27V +-5% (27 ... 32V if input above 27V)\n \n \n Output current line (term.\n 30):\n 0 ... 10A (15A /20% on time cycle)\n \n \n Output current line (term.\n 15):\n 0 ... 500mA\n \n \n Connection input:\n 0 ... 10A (15A /20% on time cycle)\n \n \n Connection output:\n Bayonet female connector with lock shell, 7 pins automotive\n standard\n \n \n Cable length input:\n _\n \n \n Cable length output:\n _\n \n \n Efficiency:\n app. 80%\n \n \n Electrical protection:\n _\n \n \n Mechanical protection:\n entirely sealed\n \n \n Dimensions:\n 200 x 70 x 40mm without cable outlet\n \n \n Mass:\n app.1200g\n \n
Special converter for the supply of a 24V anti-lock system ABS/EBS out \nof 12V or 24V. The converter input is equipped with a 12V ABS/EBS socket and the output with a 24V ABS/EBS socket. Preferential for trailer side mounting. Connection with the truck by the use of a 12V \nplug-plug-cable. The 24V trailer plug will be plugged into the converter. \nThe contacts 6 and 7 ("CAN-Bus") are unequipped.▪ IN: 12V ... 24V / OUT: 24V ▪ Input: 12V socket ▪ Output: 24V socket\n \n\n \n \n\n \n \n \n Weight: 1.85 kg
\n
input voltage 12V and 24V
high power for additional functions like EBS and level control
simply plug in on the (drawbar) trailer side
electronic protection against reverse polarity without short circuit
protection against overload
reverse voltage proof independent from polarity
high efficiency
Up to 40km/h, the cable KN-ABSFT for the input is also legal (follow regulations)
\n
\n \n
\n Input\n voltage:\n 9 ... 33V DC both lines\n \n \n Output voltage:\n 27V +-5% (27 ... 32V if input above 27V)\n \n \n Output current line (term.\n 30):\n 0 ... 10A (15A /20% on time cycle)\n \n \n Output current line (term.\n 15):\n 0 ... 500mA\n \n \n Connection input:\n ABS / EBS socket 12V ISO'7638\n \n \n Connection output:\n ABS / EBS plug 24V ISO'7638\n \n \n Cable length input:\n app. 450mm\n \n \n Cable length output:\n app. 600mm\n \n \n Efficiency:\n ca. 80%\n \n \n Mechanical protection:\n entirely sealed\n \n \n Dimensions:\n 200 x 70 x 40mm without cable outlet\n \n \n Mass:\n app.1850g\n \n
ABS Converter with input of 12V to 24V and outputs 24V
Special converter for the supply of a 24V anti-lock system ABS/EBS out of 12V or 24V. The converter input is equipped with a 12V ABS/EBS socket and the output with a 24V ABS/EBS socket. The converter is mounted in a stainless steel rack and is ready for use. Preferential for trailer side mounting. Connection with the truck by the use of a 12V plug-plug-cable. The 24V trailer plug will be plugged into the converter. The contacts 6 and 7 ("CAN-Bus") are unequipped.
▪ IN: 12V ... 24V / OUT: 24V▪ Input: 12V socket▪ Output: 24V socket
Weight: 3.3 kg
input voltage 12V and 24V
high power for additional functions like EBS and level control
compact size by high efficiency
unit ready for use, fast to mount on the (drawbar) trailer
electronic protection against reverse polarity without short circuit
protection against overload
reverse voltage proof independent from polarity
Up to 40km/h, the cable KN-ABSFT for the input is also legal (follow regulations)
Input\n voltage:
9 ... 33V DC both lines
Output voltage:
27V +-5% (27 ... 32V if input above 27V)
Output current line (term.\n 30):
0 ... 10A (15A /20% on time cycle)
Output current line (term.\n 15):
0 ... 500mA
Connection input:
ABS / EBS socket 12V ISO'7638
Connection output:
ABS / EBS socket 24V ISO'7638
Cable length input:
_
Cable length output:
_
Efficiency:
ca. 80%
Mechanical protection:
entirely sealed and a stainless steel rack
Dimensions:
300 x 150 x 87mm + socket 45mm
Mass:
app. 3300g
Converter Dual-Volt ABS, Type: ABS 12-24HBC
Voltage converter for generation of standard 24 volt voltages for a 24 volt ABS device from a 12 volt or 24 volt towing vehicle. The converter is designed for inserting in the bayonet connection of the ABS supply cable. The pins 6 and 7 for data transfer are connected through but are not converted. The converter is also suitable for clocked magnetic valve (Multivolt or similar).
The converter must be mounted in a suitable place. The converter is water proof but look for a place with few water exposure. De-icing salt may cause case corrosion.
The cables must be installed carefully to avoid damages in normal operation
Technical data:
Input voltage: 9...30 (33)V DC
Output voltage: 27V +-5% (27 ... 32V if input above 27V)
Output current line Kl 15: 0...500mA
Output current line Kl 30: 0 ... 15A (20A /20% on time cycle)
Dimensions: 200 x 70 x 25mm without cable outlet
Protection: waterproof IP 65 (casted)
Special converter for the supply of a 24V anti-lock system ABS/EBS out of 12V or 24V. The converter input is equipped with a 12V ABS/EBS socket and the output with a 24V ABS/EBS plug.
Normal use case: Trailer side mounting. The contacts 6 and 7 ("CAN-Bus") are unequipped.
▪ IN: 12V ... 24V / OUT: 24V▪ Input: 12V socket▪ Output: 24V plug
Weight: 1.85 kg
Input voltage 12V and 24V
high power for additional functions like EBS and level control
simply plug in on the (semi) trailer side
electronic protection against reverse polarity without short circuit
protection against overload
reverse voltage proof independent from polarity
high efficiency
Up to 40km/h the cable KN-ABSFT for the input is also legal (follow regulations)
Input\n voltage:
9 ... 33V DC both lines
Output voltage:
27V +-5% (27 ... 32V if input above 27V)
Output current line (term.\n 30):
0 ... 10A (15A /20% on time cycle)
Output current line (term.\n 15):
0 ... 500mA
Connection input:
ABS / EBS socket 12V ISO'7638
Connection output:
ABS / EBS plug 24V ISO'7638
Cable length input:
_
Cable length output:
_
Efficiency:
app. 80%
Electrical protection:
_
Mechanical protection:
entirely sealed
Dimensions:
200 x 70 x 40mm without cable outlets
Mass:
app.1850g
Special converter for the supply of a 24V anti-lock system ABS/EBS out \nof 12V or 24V. The converter input is equipped with a 12V ABS/EBS socket\n and the output with a 24V ABS/EBS plug. The converter is mounted in a \nstainless steel rack with a parking socket and is ready for use. Normal case: trailer side mounting. The contacts 6 and 7 ("CAN-Bus") are unequipped.▪ IN: 12V ... 24V / OUT: 24V ▪ Input: 12V socket ▪ Output: 24V plug▪ in stainless steel rack\n\n \n \n \n Weight: 3.3 kg\n \n
\n \n \n \n\n \n \n \n
input voltage 12V and 24V
high power for additional functions like EBS and level control
compact size by high efficiency
unit ready for use with parking socket, fast to mount on the (semi) trailer side
electronic protection against reverse polarity without short circuit
protection against overload
reverse voltage proof independent from polarity
high efficiency
Up to 40km/h the cable KN-ABSFT for the input is also legal (follow regulations)
\n \n
\n Input\n voltage:\n 9 ... 33V DC both lines\n \n \n Output voltage:\n 27V +-5% (27 ... 32V if input above 27V)\n \n \n Output current line (term.\n 30):\n 0 ... 10A (15A /20% on time cycle)\n \n \n Output current line (term.\n 15):\n 0 ... 500mA\n \n \n Connection input:\n ABS / EBS socket 12V ISO'7638\n \n \n Connection output:\n ABS / EBS plug 24V ISO'7638\n \n \n Cable length input:\n _\n \n \n Cable length output:\n _\n \n \n Efficiency:\n app. 80%\n \n \n Electrical protection:\n _\n \n \n Mechanical protection:\n entirely sealed and a stainless steel rack\n \n \n Dimensions:\n 300 x 150 x 87mm + socket 45mm\n \n \n Mass:\n app. 3300g\n \n
Special converter for the supply of a 24V anti-lock system ABS/EBS out of 12V or 24V. The converter input is equipped with a 12V ABS/EBS plug and the output with a 24V ABS/EBS socket. Normal case: truck side mounting. The contacts 6 and 7 ("CAN-Bus") are unequipped.▪ IN: 12V ... 24V / OUT: 24V ▪ Input: 12V plug ▪ Output: 24V socket\n\n \n \n \n Weight: 1.85 kg\n \n
\n
input voltage 12V and 24V
high power for additional functions like EBS and level control
compact size by high efficiency
simply plug in on the truck side
electronic protection against reverse polarity without short circuit
protection against overload
reverse voltage proof independent from polarity
ABS-socket divisible for mounting the converter from behind
\n
\n \n \n \n\n \n \n
\n \n
\n Input\n voltage:\n 9 ... 33V DC both lines\n \n \n Output voltage:\n 27V +-5% (27 ... 32V if input above 27V)\n \n \n Output current line (term.\n 30):\n 0 ... 10A (15A /20% on time cycle)\n \n \n Output current line (term.\n 15):\n 0 ... 500mA\n \n \n Connection input:\n ABS / EBS plug 12V ISO'7638\n \n \n Connection output:\n ABS / EBS socket 24V ISO'7638\n \n \n Cable length input:\n app. 500mm\n \n \n Cable length output:\n app. 500mm\n \n \n Efficiency:\n ca. 80%\n \n \n Mechanical protection:\n entirely sealed\n \n \n Dimensions:\n 200 x 70 x 40mm without cable outlet\n \n \n Mass:\n app. 1850g\n \n
Special converter for the supply of a 24V anti-lock system ABS/EBS out of 12V or 24V.\n The converter input is equipped with bare sheathed cable ending and the\n output with a 24V ABS/EBS socket. Normal case: farming tractor from the distribution box. The contacts 6 and 7 ("CAN-Bus") are unequipped.▪ IN: 12V ... 24V / OUT: 24V ▪ Input: bare cable ▪ Output: 24V socket\n\n \n \n \n Weight: 1.85 kg\n \n
\n
input voltage 12V and 24V
high power for additional functions like EBS and level control
compact size by high efficiency
input bare cable ending, output ABS/EBS socket
the function of the info module remains unaffected
electronic protection against reverse polarity without short circuit
protection against overload
reverse voltage proof independent from polarity
ABS-socket divisible for mounting the converter from behind
\n \n
\n Input\n voltage:\n 9 ... 33V DC both lines\n \n \n Output voltage:\n 27V +-5% (27 ... 32V if input above 27V)\n \n \n Output current line (term.\n 30):\n 0 ... 10A (15A /20% on time cycle)\n \n \n Output current line (term.\n 15):\n 0 ... 500mA\n \n \n Connection input:\n bare sheathed cable\n \n \n Connection output:\n ABS / EBS socket 24V ISO'7638\n \n \n Cable length input:\n app. 3000mm\n \n \n Cable length output:\n app. 500mm\n \n \n Efficiency:\n app. 80%\n \n \n Electrical protection:\n _\n \n \n Mechanical protection:\n entirely sealed\n \n \n Dimensions:\n 200 x 70 x 40mm without cable outlet\n \n \n Mass:\n app. 1900g\n \n
Special converter for the supply of a 24V anti-lock system ABS/EBS out \nof 12V or 24V. The converter input is equipped with a 12V ABS/EBS plug \nand the output with a 24V ABS/EBS socket. The converter is mounted in a \nstainless steel rack with a parking socket and is ready for use. Normal case: truck side mounting. The contacts 6 and 7 ("CAN-Bus") are unequipped.
▪ IN: 12V ... 24V / OUT: 24V ▪ Input: 12V plug ▪ Output: 24V socket ▪ in stainless steel rack
Weight: 3.3 kg
input voltage 12V and 24V
high power for additional functions like EBS and level control
unit ready for use with parking socket, fast to mount on the truck side
electronic protection against reverse polarity without short circuit
protection against overload
reverse voltage proof independent from polarity
high efficiency
Input\n voltage:
9 ... 33V DC both lines
Output voltage:
27V +-5% (27 ... 32V if input above 27V)
Output current line (term.\n 30):
0 ... 10A (15A /20% on time cycle)
Output current line (term.\n 15):
0 ... 500mA
Connection input:
ABS / EBS plug 12V ISO'7638
Connection output:
ABS / EBS socket 24V ISO'7638
Cable length input:
app. 370mm
Cable length output:
_
Efficiency:
ca. 80%
Mechanical protection:
entirely sealed and stainless steel rack
Dimensions:
300 x 150 x 87mm + socket 45mm
Mass:
app. 3300g
The Flash-Prevent prevents effectively the inadmissible flashing of LED lamps caused by the vehicle's pulsed cold scan ("hard" and short pulse ab. 10ms). The failure of an LED will be monitored.Attention! Flash-Prevent doesn't replace LED-ADAPT.▪ Prevents flashing of LED lamps▪ LED failure detection stays in function▪ Easy installation ahead of to the LED▪ possible to install inside the lamp housingWeight 27gEffectively prevents flashing of LED lamps\nThe failure detection stays in function\nEasy installation due to compact dimensions\nEasy installation ahead of to the LED lamps\nCompletes LED-ADAPT in combined monitoring\n
\n \n
\n Operation\n voltage:\n 24V nominal\n \n \n Output current:\n LED (max 0.4A)\n \n \n Connection input:\n strand with bare endings\n \n \n Connection output:\n strand with bare endings\n \n \n Load imitation:\n within 0-50ms cold filament\n \n \n Cable length input:\n 0.30 m\n \n \n Cable length output:\n 0.30 m\n \n \n Temperature range:\n -40...+75°C\n \n \n Electrical protection:\n __\n \n \n Mechanical protection:\n entirely sealed (IP69K)\n \n \n Dimensions:\n 40 x 18 x 15 mm without cable outlet\n \n \n Mass:\n approx. 27g\n \n \n Failure monitor LEDs:\n integrated\n \n \n Mounting rule:\n __\n \n
The Flash-Prevent prevents effectively the inadmissible flashing of LED lamps caused by the vehicle's pulsed cold scan ("hard" and short pulse ab. 10ms). The failure of an LED will be monitored.Attention! Flash-Prevent doesn't replace LED-ADAPTER.▪ Prevents flashing of LED lamps▪ LED failure detection stays in function▪ Easy installation ahead of to the LED▪ possible to install inside the lamp housing\n \n\n \n \n\n \n \n \n Weight: 0.03 kg\n \n
Effectively prevents flashing of LED lampsThe failure detection stays in functionEasy installation due to compact dimensionsEasy installation ahead of to the LED lampsCompletes LED-ADAPT in combined monitoring
\n \n
\n Operation\n voltage:\n 12V nominal\n \n \n Output current:\n LED (max 0.4A)\n \n \n Connection input:\n strand with bare endings\n \n \n Connection output:\n strand with bare endings\n \n \n Load imitation:\n within 0-50ms cold filament\n \n \n Cable length input:\n 0.30 m\n \n \n Cable length output:\n 0.30 m\n \n \n Temperature range:\n -40...+75°C\n \n \n Electrical protection:\n __\n \n \n Mechanical protection:\n entirely sealed (IP69K)\n \n \n Dimensions:\n 40 x 18 x 15 mm without cable outlet\n \n \n Mass:\n approx. 27g\n \n \n Failure monitor LEDs:\n integrated\n \n \n Mounting rule:\n __\n \n
MPN: 11223 - LED ADAPTER (BYPASS) LAB 12-7
12 Volt resistor replacement load for the adaptation of light-emitting diode (LED) trailer lamps at vehicles with incandescent lamp monitoring. The failure of a LED unit is indicated and the replacement load is turned off. To cool the system a metal surface is needed. The Bypass-function enables subsequent mounting of bulbs up to 95W.
11223 LED ADAPTER operating data:
▪ Operating voltage: 12V▪ Input: open cable end▪ Output: open cable end
Weight: 1.68 kg
Simply connect ahead of LED lamps
LED-failure is indicated
The input will be connected to the output in a bulb connection
Serves all lines with replacement resistors
Short circuit proof
Input cable 3,5m can be connected directly to the plug
Operation\n voltage:
12V nominal
Output current:
max. 8A each line (bypass on)
Connection input:
Sheathed cable 7x1+1x2,5mm², bare endings
Connection output:
Sheathed cable 7x1+1x2,5mm², bare endings
Load imitation:
2x17 W (direction), 2x4W (rear lamp), 1x34W (stoplight) 1x17W\n (fog lamp), 1x17W (reversing lamp)
Cable length input:
app. 3,5m
Cable length output:
app. 1,2m
Temperature range:
-40...+75°C
Electrical protection:
Overcurrent, overtemperature, reverse polarity
Mechanical protection:
entirely sealed (IP69K)
Dimensions:
280 x 70 x 25mm
Mass:
app. 1680g
Failure monitor LEDs:
24mA (direction), 860mA bypass,\n 6,5mA (rear lamps), 600mA bypass, 9mA (stoplight), 1510mA bypass, 9,5mA\n (rear fog lamp), 860mA bypass, 24mA (reversing light), 860mA bypass
Mounting rule:
cooling plate 8dm² (aluminum sheet 1.5mm thickness) or on\n chassis frame
High Quality LED ADAPTER (BYPASS) LAB-24-7
24 Volt resistor replacement load for the adaptation of light-emitting diode (LED) trailer lamps at vehicles with incandescent lamp monitoring. The failure of a LED unit is indicated and the replacement load is turned off. To cool the system a metal surface is needed. The Bypass-function enables subsequent mounting of bulbs up to 180W.
▪ Operating voltage: 24V▪ Input: open cable end▪ Output: open cable end
Weight: 1.68 kg
Simply connect ahead of LED lamps
LED-failure is indicated
The input will be connected to the output in a bulb connection
Serves all lines with replacement resistors
Short circuit proof
Input cable 3,5m can be connected directly to the plug
Operation\n voltage:
24V nominal
Output current:
max. 8A each line (bypass on)
Connection input:
Sheathed cable 7x1+1x2,5mm², bare endings
Connection output:
Sheathed cable 7x1+1x2,5mm², bare endings
Load imitation:
2x17 W (direction), 2x4W (rear lamp), 1x34W (stoplight) 1x17W\n (fog lamp), 1x17W (reversing lamp)
Cable length input:
app. 3,5m
Cable length output:
app. 1,2m
Temperature range:
-40...+75°C
Electrical protection:
Overcurrent, overtemperature, reverse polarity
Mechanical protection:
entirely sealed (IP69K)
Dimensions:
280 x 70 x 25mm
Mass:
app. 1680g
Failure monitor LEDs:
24mA (direction), 860mA bypass,\n 6,5mA (rear lamps), 330mA bypass, 9mA (stoplight), 1510mA bypass, 9,5mA\n (rear fog lamp), 860mA bypass, 24mA (reversing light), 860mA bypass
Mounting rule:
cooling plate 8dm² (aluminum sheet 1.5mm thickness) or on\n chassis frame
12 Volt resistor replacement load for the adaptation of light-emitting \ndiode (LED) trailer lamps at vehicles with incandescent lamp monitoring.\n The direction indicator lamps and the contacts 9 to 13 are looped. \nLED-ADAPT must be mounted on a metal surface. Important: The direction \nindicators must be incandescent lamps or LEDs with their own monitoring. Other\n lines may have additional load of 10W maximum, in this case monitoring \nis disabled.▪ Operating voltage: 12V▪ Input: 12V 13-pol plug▪ Output: 12V 13-pol socket\n\n \n \n \n Weight: 2.85 kg\n \n \n \n \n \n\n \n \n \n
Ready for use solution with 13 pin standard connectors
Configuration: "2 incandescent lamps + 5 LED + contacts 9 to 13"
No cabling work needed
The additional pins 9 to 13 are looped
Retrofitting for a factory finished trailer in case of incompatibility with a new vehicle
Failure of an LED is detected (if no incandescent lamp is connected in parallel)
\n \n
\n Operation\n voltage:\n 12V nominal\n \n \n Output current:\n 0.8A (Over current protection time delay 1...2000s !)\n \n \n Connection input:\n Male connector 13-pin 12V ISO'11446\n \n \n Connection output:\n Female socket with flap cover 13 pin 12V ISO'11446\n \n \n Load imitation:\n 2x4W (rear lamps), 1x34W (stoplight) 1x17W (fog lamp), 1x17W\n (reversing lamp)\n \n \n Cable length input:\n app. 3300mm\n \n \n Cable length output:\n app. 600mm\n \n \n Temperature range:\n -40...+75°C\n \n \n Electrical protection:\n Overcurrent, overtemperature, reverse polarity\n \n \n Mechanical protection:\n entirely sealed\n \n \n Dimensions:\n 280 x 70 x 25mm without cable outlet\n \n \n Mass:\n app. 2850g\n \n \n Failure monitor LEDs:\n 3mA (rear lamp) 8mA (stoplight) 8mA (fog lamp) 20mA\n (reversing lamp)\n \n \n Mounting rule:\n cooling plate 8dm² (aluminum\n sheet 1.5mm thickness) or on chassis frame, lamp configuration only 2 x\n incandescent lamps + 5xLED(+0...10W)\n \n
