ABS/EBS coil with ISO 7638-1 plugs.▪ 3m working length
Weight: 1.55 kg
ADR certified according to ISO 4141 and ISO 4091
High pull-out forces by strain relief inside
Connection
input:
Plug ABS/EBS 7-pin 24V ISO
7638-1
Connection output:
Plug ABS/EBS 7-pin 24V ISO 7638-1
Cable length:
3m working length (Cable Style: 2x4+3x1,5+1x(2x1,5)mm² PUR)
Mass:
1.55 kg
ABS/EBS coil with ISO 7638-2 plugs.
▪ 3m working length
Weight: 1.55 kg
ADR certified according to ISO 4141 and ISO 4091
High pull-out forces by strain relief inside
Connection input:
Plug ABS/EBS 7-pin 12V ISO 7638-2
Connection output:
Plug ABS/EBS 7-pin 12V ISO 7638-2
Cable length:
3m working length (Cable Style: 2x4+3x1,5+1x(2x1,5)mm² PUR)
Mass:
1.55 kg
ABS Converter with input of 12V to 24V and outputs 24V
Special converter for the supply of a 24V anti-lock system ABS/EBS out of 12V or 24V. The converter input is equipped with a 12V ABS/EBS socket and the output with a 24V ABS/EBS socket. The converter is mounted in a stainless steel rack and is ready for use. Preferential for trailer side mounting. Connection with the truck by the use of a 12V plug-plug-cable. The 24V trailer plug will be plugged into the converter. The contacts 6 and 7 ("CAN-Bus") are unequipped.
▪ IN: 12V ... 24V / OUT: 24V▪ Input: 12V socket▪ Output: 24V socket
Weight: 3.3 kg
input voltage 12V and 24V
high power for additional functions like EBS and level control
compact size by high efficiency
unit ready for use, fast to mount on the (drawbar) trailer
electronic protection against reverse polarity without short circuit
protection against overload
reverse voltage proof independent from polarity
Up to 40km/h, the cable KN-ABSFT for the input is also legal (follow regulations)
Input\n voltage:
9 ... 33V DC both lines
Output voltage:
27V +-5% (27 ... 32V if input above 27V)
Output current line (term.\n 30):
0 ... 10A (15A /20% on time cycle)
Output current line (term.\n 15):
0 ... 500mA
Connection input:
ABS / EBS socket 12V ISO'7638
Connection output:
ABS / EBS socket 24V ISO'7638
Cable length input:
_
Cable length output:
_
Efficiency:
ca. 80%
Mechanical protection:
entirely sealed and a stainless steel rack
Dimensions:
300 x 150 x 87mm + socket 45mm
Mass:
app. 3300g
Converter Dual-Volt ABS, Type: ABS 12-24HBC
Voltage converter for generation of standard 24 volt voltages for a 24 volt ABS device from a 12 volt or 24 volt towing vehicle. The converter is designed for inserting in the bayonet connection of the ABS supply cable. The pins 6 and 7 for data transfer are connected through but are not converted. The converter is also suitable for clocked magnetic valve (Multivolt or similar).
The converter must be mounted in a suitable place. The converter is water proof but look for a place with few water exposure. De-icing salt may cause case corrosion.
The cables must be installed carefully to avoid damages in normal operation
Technical data:
Input voltage: 9...30 (33)V DC
Output voltage: 27V +-5% (27 ... 32V if input above 27V)
Output current line Kl 15: 0...500mA
Output current line Kl 30: 0 ... 15A (20A /20% on time cycle)
Dimensions: 200 x 70 x 25mm without cable outlet
Protection: waterproof IP 65 (casted)
24 Volt resistor replacement load for the adaptation of light-emitting diode (LED) trailer lamps at vehicles with incandescent lamp monitoring. The failure of an LED unit is indicated and the replacement load is turned off. LED-ADAPT must be mounted on a metal surface.
***CAUTION*** The connection of any bulb on the output is prohibited. The overcurrent protection may cut off not until after several minutes!
▪ Operating voltage: 24V nominal▪ Input: open cable end▪ Output: open cable end
Weight: 1.68 kg
simply connect ahead of LED lamps
LED-failure is indicated
a short circuit is indicated
Serves all lines with replacement resistors
Input cable 3,5m can be connected directly to the plug
Operation voltage:
24V nominal
Output current:
0.4A (Over current protection time delay 1...2000s !)
Connection input:
Sheathed cable 8x1mm², bare endings
Connection output:
Sheathed cable 8x1mm², bare endings
Load imitation:
2x17 W (direction), 2x4W (rear lamp), 1x34W (stoplight) 1x17W (fog lamp), 1x17W (reversing lamp)
Cable length input:
app. 3,5m
Cable length output:
app. 1,2m
Temperature range:
-40...+75°C
Electrical protection:
Overcurrent, overtemperature, reverse polarity
Mechanical protection:
entirely sealed
Dimensions:
280 x 70 x 25mm without cable outlet
Mass:
app. 1680g
Failure monitor LEDs:
20mA (direction) 3mA (rear lamp) 8mA (stoplight) 8mA (fog lamp) 20mA (reversing lamp)
Mounting rule:
cooling plate 8dm² (aluminum sheet 1.5mm thickness) or on chassis frame
Step-up converter of a higher power for 24V devices at 12V car line.
▪ IN: 12V ... 24V / OUT: 24V▪ Connection: open cable end▪ 20(22)A
Weight: 1.1 kg
Converts input voltage from 12V to constant 27V
electronic protection against reverse polarity and misconnection without short circuit impact
suitable for 24V voltage boosting (wide range input)
protection against overload
reverse voltage proof independent from polarity
Input\n voltage:
10 ... 33V DC
Input current:
max. 60A (12V)
Output voltage:
27V DC +-5% (27 ... 32V if input\n above 27V)
Output current:
0 ... 20A (22A /20% on-time circle))
Connection:
the connection cable is sealed in\n the device, open ending
Cable length:
app. 550mm
Current without load:
<4mA (12V)
Efficiency:
app. 92%
Temperature range:
-40°C ... +75°C
Electrical protection:
overtemperature, overcurrent, reverse polarity
Mechanical protection:
entirely sealed (IP69K)
Dimensions:
200 x 70 x 40mm without cable outlet
Mass:
app. 1100g
Step-up converter of a higher power for 24V devices at 12V car line.
▪ IN: 12V ... 24V / OUT: 24V▪ Input: open cable end▪ Output: open cable end▪ 10A Permanent positive
Weight: 0.92 kg
converts input voltage from 12V to 26V regulated
electronic protection against reverse polarity and misconnection without short circuit
suitable for voltage boosting (wide range input)
Input\n voltage:
10 ... 33V DC
Input current:
max. 35A (12V)
Output voltage:
26V DC +-2%
Output current:
0 ... 10A (15A /20% duty cycle ED)
Connection input:
open cable end
Connection output:
open cable end
Cable length input:
app. 550mm
Cable length output:
app. 550mm
Current without load:
8mA (12V)
Efficiency:
app. 80%
Temperature range:
-40°C ... +75°C
Electrical protection:
overtemperature, overcurrent, reverse polarity
Mechanical protection:
entirely sealed (IP69K)
Dimensions:
200 x 70 x 40mm without cable outlet
Mass:
app. 920g
Converter to supply the lights of 12V trailers at 24V car line, including reversing lamp. Incandescent lamps and suitable RMS compatible LEDs can be operated. Please ask the LED lamp manufacturer for RMS compatibility. For further details please see our handout “LED lamps in RMS operation”.
▪ IN: 24V / OUT: 12V▪ Input: open cable end▪ Output: open cable end▪ with reversing lamp
Weight: 0.96 kg
quick and simple to connect:- at rear lamps of car-like equipment- parallel to 24V socket- instead of 24V socket
the function of the C2-indicator-lamps of all flasher units is guaranteed
works well with lamp-control-units
correct function of ABS-info-module is guaranteed
solid casting - waterproof and shockproof
internal short circuit and overload protection
power reserves in case of additional lamps at the trailer
Input\n voltage:
24V DC nominal (18 ... 33V)
Output voltage:
RMS power equation for 12V (9 ... 15.5V)
Output power:
2 x 21W + 5 x 60W
Connection input:
open cable end
Connection output:
open cable end
Cable length input:
app. 100cm
Cable length output:
app. 120cm
Current without load:
0mA with open output (no current)
Efficiency:
flasher unit c. 90%, other units c. 95%
Temperature range:
-40 ... +75°C
Electrical protection:
overload current (self-resetting) overtemperature\n (self-resetting)
Mechanical protection:
entirely sealed
Dimensions:
200 x 65 x 25mm without cable outlet
Mass:
app. 960g
Attention:
for bulbs and RMS - LEDs only!
Converter for charging a 12V lead-accumulator within a 24V car line 26(35)A-▪ IN: 24V / OUT: 12V ▪ Connection: open cable end
Weight: 0.93 kg
in case of charging the 24V battery has priority
the charging process starts at a voltage of more than 26.4V and stops at less than 25.0V
to avoid a flattering of the circuit, the on/off hysteresis is time-delayed
Attention: at input voltages, less than 26.4V the converter is out of work as directed!
Input
voltage:
16 ... 30V DC
Output voltage:
half input voltage at input >26.4V
Output current:
26A permanent, 35A for about 5 min.
Connection:
3-pole plug "Anderson Powerpole Modular"
Power-on-voltage:
26.4V
Power-off-voltage:
25.0V
Cable length:
app. 180mm
Current without load:
0.7mA at 24V
Efficiency:
app. 92%
Temperature range:
-40 ... +75°C, derating T>45°C
Electrical protection:
overcurrent, overtemperature, input transients
Mechanical protection:
entirely sealed
Dimensions:
200 x 70 x 40mm
Mass:
app. 930g
Time-delay:
app. 5 sec.
Professional inverter 12V to 230V AC for rough environmental conditions.▪ IN: 12V / OUT: 230V/50Hz▪ Input: 2x open cable ends▪ Output: open cable ends
Weight: 8 kg
waterproof
starts automatically, 5mA standby
perfectly suitable for fixed installation in service vehicle, separate socket
100% overload possible
Attention: no sinus, but almost all consumers can be connected
Input
voltage:
10 ... 15V DC
Output voltage:
225V +3% / -5%, 50Hz quartz-generated (115V/ 60Hz optional)
Output power:
600VA permanent, 1,200VA 10min, 12A (24A at 115V) 4sec
Connection input:
2x open cable end
Connection output:
open cable end
Cable length input:
2x app. 1200mm
Cable length output:
app. 2300mm
Current without load:
standby current 5mA RMS at 12V
Switching level:
start at 1W load
Current at 1W load:
1A at 12V
Overvoltage:
>16V, self-resetting
Undervoltage:
off at 10V, on at 11V
Efficiency:
app. 95% at 100% load / app. 80% at 10% load / app. 80% at
200% load
Electrical protection:
against reverse polarity, overtemperature, short circuit
Mechanical protection:
aluminum casting case IP66
Dimensions:
260 x 160 x 90mm (without screwings) without cable outlet
Mass:
app. 8,000g incl. Cables
Signalform:
step weave with fast PWM-modulation (to cos phi 0.2 at 50%
load)
Safety:
potential division with potential compensation (protective
conductor)
Professional inverter 24V to 230V AC for rough environmental conditions.
▪ IN: 24V / OUT: 230V/50Hz▪ Input: 2x open cable ends▪ Output: open cable ends
Weight: 8 kg
waterproof
starts automatically, 5mA standby
perfectly suitable for fixed installation in service vehicle, separate socket
100% overload possible
Attention: no sinus, but almost all consumers can be connected
Input
voltage:
20 ... 30V DC
Output voltage:
225V +3% / -5%, 50Hz quartz generated (115V/ 60Hz optional)
Output power:
600VA permanent, 1,200VA 10min, 12A (24A at 115V) 4sec
Connection input:
2x open cable end
Connection output:
open cable end
Cable length input:
2x app. 1200mm
Cable length output:
app. 2300mm
Current without load:
standby current 5mA RMS at 12V
Switching level:
start at 1W load
Current at 1W load:
0.6A at 26V
Overvoltage:
>33V, self-resetting
Undervoltage:
off at 20V, on at 22V
Efficiency:
app. 95% at 100% load / app. 80% at 10% load / app. 80% at
200% load
Electrical protection:
against reverse polarity, overtemperature, short circuit
Mechanical protection:
aluminum casting case
Dimensions:
260 x 160 x 90mm (without screwings) without cable outlet
Mass:
app. 8,000g incl. Cables
Signalform:
step weave with fast PWM-modulation (to cos phi 0.2 at 50%
load)
Safety:
potential division with potential compensation (protective
conductor)
Special converter for the supply of a 24V anti-lock system ABS/EBS out of 12V or 24V. The converter is equipped with
ABS/EBS bayonet connectors. For inserting into the trailer cable. The
contacts 6 and 7 ("CAN-Bus") are connected through.
Attention! The can bus lines require a separate level shifter. Without a level shifter, the brake operates correctly on the ABS level.
▪ IN: 12V ... 24V / OUT: 24V ▪ Input: Bayonet female connector▪ Output: Bayonet male connector
Weight: 1.2 kg
input voltage 12V and 24V
high power for additional functions like EBS and level control
only insert into the ABS/EBS cable at the bayonet connection
electronic protection against reverse polarity without short circuit
protection against overload
reverse voltage proof independent from polarity
very fast done and water protected mounting without additional measures
the function of the info module remains active
compact size by high efficiency
Input
voltage:
9 ... 33V DC both lines
Output voltage:
27V +-5% (27 ... 32V if input above 27V)
Output current line (term.
30):
0 ... 10A (15A /20% on time cycle)
Output current line (term.
15):
0 ... 500mA
Connection input:
Bayonet female connector with lock shell, 7 pins automotive
standard
Connection output:
Bayonet male connector, 7 pins automotive standard
Cable length input:
_
Cable length output:
_
Efficiency:
app. 80%
Electrical protection:
_
Mechanical protection:
entirely sealed
Dimensions:
200 x 70 x 40mm without cable outlet
Mass:
app.1200g
Special converter for the supply of a 24V anti-lock system ABS/EBS out of 12V or 24V. The converter is equipped with
ABS/EBS bayonet connectors. For inserting into the trailer cable. Male
input / female output (Reverse configuration). The contacts 6 and 7
("CAN-Bus") are connected through.
Attention! The can bus lines require a separate level shifter. Without a level shifter, the brake operates correctly on the ABS level.
▪ IN: 12V ... 24V / OUT: 24V▪ Input: Bayonet male connector▪ Output: Bayonet female connector
Weight: 1.2 kg
very fast done and water protected mounting without additional measures
simply insert into the ABS/EBS cable at the bayonet connection (Reverse configuration)
input voltage 12V and 24V
high power for additional functions like EBS and level control
the function of the info module remains active
electronic protection against reverse polarity without short circuit
protection against overload
reverse voltage proof independent from polarity
compact size by high efficiency
Input
voltage:
9 ... 33V DC both lines
Output voltage:
27V +-5% (27 ... 32V if input above 27V)
Output current line (term.
30):
0 ... 10A (15A /20% on time cycle)
Output current line (term.
15):
0 ... 500mA
Connection input:
0 ... 10A (15A /20% on time cycle)
Connection output:
Bayonet female connector with lock shell, 7 pins automotive
standard
Cable length input:
_
Cable length output:
_
Efficiency:
app. 80%
Electrical protection:
_
Mechanical protection:
entirely sealed
Dimensions:
200 x 70 x 40mm without cable outlet
Mass:
app.1200g
Special converter for the supply of a 24V anti-lock system ABS/EBS out of 12V or 24V.
The converter input is equipped with bare sheathed cable ending and the
output with a 24V ABS/EBS socket. Normal case: farming tractor from the distribution box. The contacts 6 and 7 ("CAN-Bus") are unequipped.▪ IN: 12V ... 24V / OUT: 24V ▪ Input: bare cable ▪ Output: 24V socket
Weight: 1.85 kg
input voltage 12V and 24V
high power for additional functions like EBS and level control
compact size by high efficiency
input bare cable ending, output ABS/EBS socket
the function of the info module remains unaffected
electronic protection against reverse polarity without short circuit
protection against overload
reverse voltage proof independent from polarity
ABS-socket divisible for mounting the converter from behind
Input
voltage:
9 ... 33V DC both lines
Output voltage:
27V +-5% (27 ... 32V if input above 27V)
Output current line (term.
30):
0 ... 10A (15A /20% on time cycle)
Output current line (term.
15):
0 ... 500mA
Connection input:
bare sheathed cable
Connection output:
ABS / EBS socket 24V ISO'7638
Cable length input:
app. 3000mm
Cable length output:
app. 500mm
Efficiency:
app. 80%
Electrical protection:
_
Mechanical protection:
entirely sealed
Dimensions:
200 x 70 x 40mm without cable outlet
Mass:
app. 1900g
Special converter for the supply of a 24V anti-lock system ABS/EBS out
of 12V or 24V. The converter input is equipped with a 12V ABS/EBS plug
and the output with a 24V ABS/EBS socket. The converter is mounted in a
stainless steel rack with a parking socket and is ready for use. Normal case: truck side mounting. The contacts 6 and 7 ("CAN-Bus") are unequipped.▪ IN: 12V ... 24V / OUT: 24V ▪ Input: 12V plug ▪ Output: 24V socket ▪ in stainless steel rack
Weight: 3.3 kg
input voltage 12V and 24V
high power for additional functions like EBS and level control
unit ready for use with parking socket, fast to mount on the truck side
electronic protection against reverse polarity without short circuit
protection against overload
reverse voltage proof independent from polarity
high efficiency
Input
voltage:
9 ... 33V DC both lines
Output voltage:
27V +-5% (27 ... 32V if input above 27V)
Output current line (term.
30):
0 ... 10A (15A /20% on time cycle)
Output current line (term.
15):
0 ... 500mA
Connection input:
ABS / EBS plug 12V ISO'7638
Connection output:
ABS / EBS socket 24V ISO'7638
Cable length input:
app. 370mm
Cable length output:
_
Efficiency:
ca. 80%
Mechanical protection:
entirely sealed and stainless steel rack
Dimensions:
300 x 150 x 87mm + socket 45mm
Mass:
app. 3300g
The Flash-Prevent prevents effectively the inadmissible flashing of LED lamps caused by the vehicle's pulsed cold scan ("hard" and short pulse ab. 10ms). The failure of an LED will be monitored.Attention! Flash-Prevent doesn't replace LED-ADAPT.▪ Prevents flashing of LED lamps▪ LED failure detection stays in function▪ Easy installation ahead of to the LED▪ possible to install inside the lamp housingWeight 27gEffectively prevents flashing of LED lamps
The failure detection stays in function
Easy installation due to compact dimensions
Easy installation ahead of to the LED lamps
Completes LED-ADAPT in combined monitoring
Operation
voltage:
24V nominal
Output current:
LED (max 0.4A)
Connection input:
strand with bare endings
Connection output:
strand with bare endings
Load imitation:
within 0-50ms cold filament
Cable length input:
0.30 m
Cable length output:
0.30 m
Temperature range:
-40...+75°C
Electrical protection:
__
Mechanical protection:
entirely sealed (IP69K)
Dimensions:
40 x 18 x 15 mm without cable outlet
Mass:
approx. 27g
Failure monitor LEDs:
integrated
Mounting rule:
__
The Flash-Prevent prevents effectively the inadmissible flashing of LED lamps caused by the vehicle's pulsed cold scan ("hard" and short pulse ab. 10ms). The failure of an LED will be monitored.Attention! Flash-Prevent doesn't replace LED-ADAPTER.▪ Prevents flashing of LED lamps▪ LED failure detection stays in function▪ Easy installation ahead of to the LED▪ possible to install inside the lamp housing
Weight: 0.03 kg
Effectively prevents flashing of LED lampsThe failure detection stays in functionEasy installation due to compact dimensionsEasy installation ahead of to the LED lampsCompletes LED-ADAPT in combined monitoring
Operation
voltage:
12V nominal
Output current:
LED (max 0.4A)
Connection input:
strand with bare endings
Connection output:
strand with bare endings
Load imitation:
within 0-50ms cold filament
Cable length input:
0.30 m
Cable length output:
0.30 m
Temperature range:
-40...+75°C
Electrical protection:
__
Mechanical protection:
entirely sealed (IP69K)
Dimensions:
40 x 18 x 15 mm without cable outlet
Mass:
approx. 27g
Failure monitor LEDs:
integrated
Mounting rule:
__
12 Volt resistor replacement load for the adaptation of light-emitting
diode (LED) trailer lamps at vehicles with incandescent lamp monitoring.
The direction indicator lamps and the contacts 9 to 13 are looped.
LED-ADAPT must be mounted on a metal surface. Important: The direction
indicators must be incandescent lamps or LEDs with their own monitoring. Other
lines may have additional load of 10W maximum, in this case monitoring
is disabled.▪ Operating voltage: 12V▪ Input: 12V 13-pol plug▪ Output: 12V 13-pol socket
Weight: 2.85 kg
Ready for use solution with 13 pin standard connectors
Configuration: "2 incandescent lamps + 5 LED + contacts 9 to 13"
No cabling work needed
The additional pins 9 to 13 are looped
Retrofitting for a factory finished trailer in case of incompatibility with a new vehicle
Failure of an LED is detected (if no incandescent lamp is connected in parallel)
Operation
voltage:
12V nominal
Output current:
0.8A (Over current protection time delay 1...2000s !)
Connection input:
Male connector 13-pin 12V ISO'11446
Connection output:
Female socket with flap cover 13 pin 12V ISO'11446
Load imitation:
2x4W (rear lamps), 1x34W (stoplight) 1x17W (fog lamp), 1x17W
(reversing lamp)
Cable length input:
app. 3300mm
Cable length output:
app. 600mm
Temperature range:
-40...+75°C
Electrical protection:
Overcurrent, overtemperature, reverse polarity
Mechanical protection:
entirely sealed
Dimensions:
280 x 70 x 25mm without cable outlet
Mass:
app. 2850g
Failure monitor LEDs:
3mA (rear lamp) 8mA (stoplight) 8mA (fog lamp) 20mA
(reversing lamp)
Mounting rule:
cooling plate 8dm² (aluminum
sheet 1.5mm thickness) or on chassis frame, lamp configuration only 2 x
incandescent lamps + 5xLED(+0...10W)
12 Volt resistor replacement load for the adaptation of light-emitting diode (LED) trailer lamps at vehicles with incandescent lamp monitoring. The failure of direction indicators is indicated.***CAUTION*** LED-ADAPT must be mounted on a metal surface. The connection of any bulb on the direction indicator output is prohibited. The overcurrent protection may cut off not until after several minutes!
▪ Operating voltage: 12V nominal▪ as ballast for LED direction indicators▪ operates right and left turn signals
Weight: 0.35 kg
Single cable version
LED direction indicator monitoring
Serves the direction indicators with replacement resistors
Conditionally short circuit proof (about 100 cycles)
Operation voltage:
12V nominal
Output current:
max. 0.4A (direction) (Over current protection time delay 1...2000s!)
Connection:
Hose line 5x1mm², ins. 6.3mm blade receptacle
Load imitation:
2x17W (direction)
Cable length:
0.25 m
Temperature range:
-40...+75°C
Electrical protection:
Overcurrent, overtemperature, reverse polarity
Mechanical protection:
Entirely sealed (IP69K)
Dimensions:
120 x 70 x 25mm
Mass:
app. 350g
Failure monitor LEDs:
20mA (direction)
Mounting rule:
Cooling plate 8dm² (aluminum sheet 1.5mm thickness) or on chassis frame
12 Volt resistor replacement load for the
adaptation of light-emitting diode (LED) trailer lamps at vehicles with
incandescent lamp monitoring. The failure of a LED unit is indicated and
the replacement load is turned off. LED-ADAPT must be mounted on a
metal surface.
***CAUTION*** The connection of any bulb on the output is prohibited. The overcurrent protection may cut off not until after several minutes!
▪ Operating voltage: 12V nominal▪ Input: open cable end▪ Output: open cable endWeight: 1.68 kg
Simply connect ahead of LED lamps
LED failure is indicated
The short circuit is indicated
Serves all lines with replacement resistors
Input cable 3,5m can be connected directly to the plug
Operation
voltage:
12V nominal
Output current:
0.8A (Over current protection time delay 1...2000s !)
Connection input:
Sheathed cable 8x1mm², bare endings
Connection output:
Sheathed cable 8x1mm², bare endings
Load imitation:
2x17 W (direction), 2x4W (rear lamp), 1x34W (stoplight) 1x17W
(fog lamp), 1x17W (reversing lamp)
Cable length input:
app. 3,5m
Cable length output:
app. 1,2m
Temperature range:
-40...+75°C
Electrical protection:
Overcurrent, overtemperature, reverse polarity
Mechanical protection:
entirely sealed
Dimensions:
280 x 70 x 25mm without cable outlet
Mass:
app. 1680g
Failure monitor LEDs:
20mA (direction) 3mA (rear lamp) 8mA (stoplight) 8mA (fog
lamp) 20mA (reversing lamp)
Mounting rule:
cooling plate 8dm² (aluminum sheet 1.5mm thickness) or on
chassis frame
DC-DC Converter Isolated 9–36 V to 12 V (IP67)
This isolated DC-DC converter from Micropower Group is engineered to convert a wide 9–36 V DC input into a stable 12 V output with high efficiency and robust protection. Designed with advanced switching technology, it delivers reliable performance even in harsh environments, making it suitable for industrial and mobile applications.
Key Specifications
Input Voltage: 9–36 V DC
Output Voltage: 12 V DC nominal (≈13.5 V actual)
Output Power: 200 W
Efficiency: >96 %
Isolation: Galvanically isolated
Ingress Protection: IP67 rated enclosure
Connections: Cable, loose end
Dimensions: 150 × 93 × 31 mm
Weight: 0.82 kg
Main Features
Wide Input Range: Accepts 9–36 V DC supply for flexible deployment.
High Efficiency: Advanced switching power conversion minimizes energy loss and heat.
Waterproof Design: IP67 enclosure protects against dust and water for outdoor use.
Electrical Isolation: Galvanic isolation improves safety and noise immunity.
Tough Construction: Durable housing suitable for demanding industrial environments.
Protection Features
Reverse polarity protection
Short-circuit protection
Overload protection
Typical Applications
Industrial automation power supplies
Vehicle and mobile power systems
Battery-operated equipment
Telecommunications power units
Control cabinet power conversion
Installation & Integration
Pre-wired cable connections for easy setup
Full-featured electrical protection for reliable performance
Suitable for outdoor and rugged environments thanks to IP67 enclosure
Note: This isolated DC-DC converter is ideal for applications requiring wide input tolerance, electrical isolation, and rugged protection in both industrial and mobile systems.
Special converter for the supply of a 12V anti-lock system ABS/EBS out of 12V or 24V. The converter input is equipped with a 24V ABS/EBS socket and the output with a 12V ABS/EBS plug. For trailer side mounting only. The contacts 6 and 7 ("CAN-Bus") are unequipped.▪ IN: 12V ... 24V / OUT: 12V▪ Input: 24V socket▪ Output: 12V plug
Weight: 1.6 kg
input voltage 12V and 24V
compact size because of a high efficiency
simply plug in on the (semi) trailer side
the function of the info module remains effective
protection against overload
ABS-socket divisible for mounting the converter from behind
Input
voltage:
9 ... 33V DC both lines
Output voltage:
13,2V +-5% (at U< 13,2V 8,5...13,2V)
Output current line (term.
30):
0 ... 8A (10A)
Output current line (term.
15):
0 ... 300mA (600mA)
Connection input:
ABS / EBS socket 24V ISO'7638
Connection output:
ABS / EBS plug 12V ISO'7638
Efficiency:
ca. 80%
Mechanical protection:
entirely sealed
Dimensions:
170 x 70 x 25mm without cable outlet
Mass:
app. 1600g
Special converter for the supply of a 12V anti-lock system out of 12V or 24V. Input and output cables are cast solid, open-end.
▪ IN: 12V ... 24V / OUT: 12V▪ Input: open cable end▪ Output: open cable end
Weight: 0.8 kg
input voltage 24V and 12V
compact size by high efficiency in the power line
simple mounting by inserting into cable line (5-pole cable)
Input
voltage:
9 ... 33V DC both lines
Output voltage:
8,5 ... 12V +-5%
Output current line (term.
30):
0 ... 6A (10A /20% on time cycle)
Output current line (term.
15):
300mA
Connection input:
open cable end
Connection output:
open cable end
Cable length input:
app. 450mm
Cable length output:
app. 600mm
Efficiency:
app. 90% at 28V and nominal load, app. 96 ... 85% on term. 15,
app. 92 ... 38% on term. 30
Electrical protection:
Overload protection
Mechanical protection:
entirely sealed
Dimensions:
170 x 70 x 25mm without cable outlet
Mass:
app. 800g
